Shirts are hip length to protect against dirt, grime, and light liquid splashes. They are breathable and lightweight to keep you cool while working. They have snaps down the front and open cuffs.

Tyvek polyethylene is made of heat- and pressure-bonded fibers for a material that’s soft yet strong.

Kleenguard polypropylene is made of five layers of nonwoven fabric, so it is more abrasion resistant and harder to tear than Tyvek polyethylene. The material is antistatic, so it protects sensitive equipment from electrostatic discharge.

Protect the front of your body from dirt, grime, and other materials. These aprons tie in the back.

Polypropylene offers economical protection in environments where liquid splashes and abrasion resistance are not a concern.

Tyvek polyethylene provides better tear and abrasion resistance than polypropylene, polyolefin, and polyethylene. It holds up to occasional contact with nonhazardous liquids, such as water and paint spray. It is made of heat- and pressure-bonded fibers for a material that’s soft yet strong.

Designed to meet clean room standards, these coveralls act as a barrier between the worker and the room to prevent pollutants, such as dust particles and microbes, from contaminating a space. They’re suitable for use in clean rooms rated to both Federal Standard and ISO classes. In both systems, clean rooms with lower class ratings have fewer contaminants. They provide full body coverage and have a zipper down the front.

Tyvek polyethylene is made of heat- and pressure-bonded fibers for a material that’s soft yet strong. It holds up to occasional contact with nonhazardous liquids, such as water and paint spray. These coveralls are disposable. They have elastic cuffs to help keep liquids from splashing in.

Polyester greatly outlasts Tyvek polyethylene. It resists abrasion and liquid splashes and is reusable when laundered to clean room standards—lasts for up to 100 washes. Must be laundered prior to first use. These coveralls have knit cuffs to keep sleeves in place and prevent liquids from splashing in, as well as snaps on the collar and snaps on the pant cuffs to modify the fit.

Use the size chart for general guidance. When choosing a size, consider individual body shape and clothing worn underneath.

Designed to meet clean room standards, these aprons prevent pollutants from contaminating the space. Aprons resist spills and splashes from acids, alkalies, and other chemicals. They have sleeves with elastic cuffs to help keep liquids from splashing in. They are disposable.

Also known as bouffants, these hats and hairnets keep hair contained to reduce contamination. Designed to meet clean room standards, they act as a barrier between the worker and the room to prevent pollutants, such as dust particles and microbes, from contaminating a space. They are rated Class 100 for use in clean rooms containing fewer than 100 particles larger than 0.5 microns in each cubic foot of air space. Use these hats and hairnets for short- to medium-length hair.

Designed to meet clean room standards, these coats act as a barrier between the worker and the room to prevent pollutants, such as dust particles and microbes, from contaminating a space. They’re suitable for use in clean rooms rated to both Federal Standard and ISO classes. In both systems, clean rooms with lower class ratings have fewer contaminants. They are knee length with elastic cuffs on the sleeves, which help keep liquid splashes out.

Tyvek polyethylene holds up to occasional contact with nonhazardous liquids, such as water and paint spray. It is made of heat- and pressure-bonded fibers for a material that’s soft yet strong. These coats are disposable.

Polyester greatly outlasts Tyvek polyethylene. It resists abrasion and liquid splashes and is reusable when laundered to clean room standards—lasts for up to 100 washes. Must be laundered prior to first use.

Use the size chart for general guidance. When choosing a size, consider individual body shape and clothing worn underneath.

Designed to meet clean room standards, these hoods act as a barrier between the worker and the room to prevent pollutants, such as dust particles and microbes, from contaminating a space.

Lower clean room classes have fewer and smaller contaminants.

Tyvek polyethylene holds up to occasional contact with nonhazardous liquids, such as water and paint spray. It is made of heat- and pressure-bonded fibers for a material that’s soft yet strong. These hoods are disposable.

Polyester greatly outlasts Tyvek polyethylene. It withstands liquid splashes and abrasion and is reusable when laundered to clean room standards—lasts for up to 100 washes. Must be laundered prior to first use.

As you breathe through them, these respirators filter out contaminants in the air. Throw them out when soiled, damaged, or breathing is difficult.

N95 respirators filter out 95% of solid particles. They are not oil resistant.

N99 respirators filter out 99% of solid particles. They are not oil resistant.

N100 respirators filter out 99.97% of solid particles. They are not oil resistant.

R95 respirators resist oil exposure for up to 8 hours and filter out 95% of solid particles.

P95 respirators resist oil exposure for up to 40 hours and filter out 95% of solid particles.

P100 respirators resist oil exposure for up to 40 hours and filter out 99.97% of solid particles.

Respirators with an exhale valve reduce breathing resistance and hot air buildup.

Respirators with a mesh shell hold their shape in heat and humidity.

Respirators with a comfort strap unbuckle to let the mask hang loosely around your neck when not in use.

Slip on this mask for protection from dust irritation.

Comfortably wear face masks for extended periods in food-processing facilities. Also known as ear savers, these extenders secure mask straps to the back of your head instead of your ears, and have notches to adjust masks to fit more tightly or loosely. To help you comply with Hazard Analysis and Critical Control Point (HACCP) programs, they contain metal additives that will be caught by metal detectors if they fall into a batch of food. These extenders are also bright blue, making them easy to spot and remove. They’re FDA compliant for direct contact with food.

Patch rips and seal gloves, boots, and respirators to clothing with this chemical-resistant tape.

Keep dust and other particles on your shoes from contaminating clean rooms. These covers stretch to fit over most shoes (up to men’s size 15), and an elastic band keeps them in place once they’re on. Made of lightweight fabric, they won’t weigh you down. They’re also water resistant, so your feet stay dry in wet areas.

To keep contaminates off of your hands, apply and remove these covers with Dispensers and Removers for Clean Room Shoe Covers. They’re quick, hands-free, and you don’t need to bend down to use them.

Polyethylene covers are best for short-term use.

For long-term wear, use polypropylene covers—they’re more durable than polyethylene. They also have a skid-resistant sole that's coated to keep you from sliding on slick floors. These covers won't generate a static charge, so they're safe to use around sensitive electronic equipment.

Use these face shields for light duty applications that don't require much impact resistance. They have a padded frame for comfort. Note: Shields do not meet ANSI/ISEA Z87.1.

These covers are lightweight and protect shoes from dirt, grime, and liquid splashes.

Use polyethylene covers around food processing plants while reducing the risk of contaminating the food. To help you comply with Hazard Analysis and Critical Control Point (HACCP) programs, these covers contain metal additives that will set off metal detectors if they—or any piece of them—fall into your line. They’re also light blue, making them easier to spot than other white or gray covers. These covers are FDA compliant for direct contact with food.

Tyvek polyethylene covers are tear and abrasion resistant. Made of heat- and pressure-bonded fibers, they’re soft yet strong. Those with a skid-resistant sole grip wet and slippery surfaces for good traction.

Kleenguard polypropylene covers have five layers of nonwoven fabric, so they’re more abrasion resistant and harder to tear than Tyvek polyethylene covers. They’re also antistatic, so they protect sensitive equipment from electrostatic discharge.

Designed to meet clean room standards, these boot covers act as a barrier between the worker and the room to prevent pollutants such as dust particles and microbes from contaminating a space. They are rated Class 100 for use in clean rooms containing fewer than 100 particles larger than 0.5 microns in each cubic foot of air space. They are knee high with an elastic top and a tie at the ankle. A skid-resistant sole grips wet and slippery surfaces for good traction.