Message Type Message Type |
|---|
 |  |
| Accident Prevention | Traffic Control and Vehicle |
Message Message |
|---|
Message Color Message Color |
|---|
 | Black/White |
 | Black |
 | Black/Yellow |
Accident Prevention Message Type Accident PreventionMessage Type |
|---|
|
Header Color Header Color |
|---|
 | Red |
 | Black/Red/White |
| Black |
 | Yellow |
Specifications Met Specifications Met |
|---|
|
Message Contains Message Contains |
|---|
|
Language Language |
|---|
|
About Accident Prevention Signs
More
Illustrated Machine and Equipment Operation Signs
The illustrations on these signs help workers identify hazards at a glance. Use them to communicate an imminently dangerous situation that, if not avoided, will result in death or serious injury. All signs meet OSHA safety color standards for indicating hazards.
Mounting | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Fasteners Included | Number of Holes | Hole Dia. | 1-5 | 6-Up | |
Danger—Do Not Operate Without Guards in Place (English)— Black/Red/White Header | ||||||||
Adhesive Back—Vinyl Plastic | ||||||||
| 7" | 10" | 0.004" | __ | __ | __ | 000000000 | 00000 | 00000 |
| 10" | 14" | 0.004" | __ | __ | __ | 000000000 | 0000 | 0000 |
Danger—Do Not Operate Without Guards in Place (English)—Red Header | ||||||||
Adhesive Back—Vinyl Plastic | ||||||||
| 14" | 10" | 0.004" | __ | __ | __ | 000000000 | 0000 | 0000 |
With Mounting Holes—Polyethylene Plastic | ||||||||
| 14" | 10" | 0.055" | No | 4 | 3/16" | 000000000 | 00000 | 00000 |
Machine and Equipment Operation Signs
Communicate dangers to workers near moving equipment that could cause injury.
Signs with a header meet OSHA safety color standards for indicating hazards. Danger headers are used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury. Caution headers indicate a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.
Mounting | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Fasteners Included | No. of Holes | Hole Dia. | 1-5 | 6-Up | |
Adhesive Back—Vinyl Plastic | ||||||||
| 7" | 10" | 0.004" | __ | __ | __ | 000000000 | 00000 | 00000 |
| 10" | 14" | 0.004" | __ | __ | __ | 000000000 | 0000 | 0000 |
| 14" | 20" | 0.004" | __ | __ | __ | 000000000 | 00000 | 00000 |
With Mounting Holes—Polyethylene Plastic | ||||||||
| 7" | 10" | 0.055" | No | 4 | 3/16" | 0000000 | 00000 | 0000 |
| 10" | 14" | 0.055" | No | 4 | 3/16" | 0000000 | 00000 | 00000 |
| 14" | 20" | 0.055" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
With Mounting Holes—Aluminum | ||||||||
| 7" | 10" | 0.04" | No | 4 | 3/16" | 0000000 | 00000 | 0000 |
| 10" | 14" | 0.04" | No | 4 | 3/16" | 0000000 | 00000 | 00000 |
| 14" | 20" | 0.04" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
Mounting | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Fasteners Included | No. of Holes | Hole Dia. | 1-5 | 6-Up | |
Adhesive Back—Vinyl Plastic | ||||||||
| 14" | 10" | 0.004" | __ | __ | __ | 00000000 | 00000 | 00000 |
| 20" | 14" | 0.004" | __ | __ | __ | 00000000 | 00000 | 00000 |
With Mounting Holes—Polyethylene Plastic | ||||||||
| 14" | 10" | 0.055" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
| 20" | 14" | 0.055" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
With Mounting Holes—Aluminum | ||||||||
| 14" | 10" | 0.04" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
| 20" | 14" | 0.04" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
Mounting | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Fasteners Included | No. of Holes | Hole Dia. | 1-5 | 6-Up | |
Adhesive Back—Vinyl Plastic | ||||||||
| 7" | 10" | 0.004" | __ | __ | __ | 00000000 | 00000 | 00000 |
| 10" | 14" | 0.004" | __ | __ | __ | 00000000 | 0000 | 0000 |
| 14" | 20" | 0.004" | __ | __ | __ | 000000000 | 00000 | 00000 |
With Mounting Holes—Polyethylene Plastic | ||||||||
| 7" | 10" | 0.055" | No | 4 | 3/16" | 00000000 | 00000 | 0000 |
| 10" | 14" | 0.055" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
| 14" | 20" | 0.055" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
With Mounting Holes—Aluminum | ||||||||
| 7" | 10" | 0.04" | No | 4 | 3/16" | 00000000 | 00000 | 0000 |
| 10" | 14" | 0.04" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
| 14" | 20" | 0.04" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
Mounting | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Fasteners Included | No. of Holes | Hole Dia. | 1-5 | 6-Up | |
Adhesive Back—Vinyl Plastic | ||||||||
| 14" | 10" | 0.004" | __ | __ | __ | 000000000 | 00000 | 00000 |
| 20" | 14" | 0.004" | __ | __ | __ | 00000000 | 00000 | 00000 |
With Mounting Holes—Polyethylene Plastic | ||||||||
| 14" | 10" | 0.055" | No | 4 | 3/16" | 0000000 | 00000 | 00000 |
| 20" | 14" | 0.055" | No | 4 | 3/16" | 0000000 | 00000 | 00000 |
With Mounting Holes—Aluminum | ||||||||
| 14" | 10" | 0.04" | No | 4 | 3/16" | 0000000 | 00000 | 00000 |
| 20" | 14" | 0.04" | No | 4 | 3/16" | 0000000 | 00000 | 00000 |
Lockout Steering Wheel Covers
Cover a steering wheel to communicate when equipment is out of service. Use a cable tie (not included) to secure in place. These covers meet OSHA safety color standards for indicating hazards.
Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury.
Illustrated Machine and Equipment Operation Labels
Identify hazards at a glance with the headers and illustrations on these labels. They meet OSHA 1910.145 safety color standards for indicating hazards.
Danger headers are used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury.
Caution headers indicate a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.
Labels that meet ANSI Z535 adhere to standards for identifying a hazard and describing how to avoid it.
| Ht. | Wd. | Mount Type | Material | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
| 5" | 3 1/2" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA 1910.145, ANSI Z535 | 5 | 0000000 | 00000 |
| Ht. | Wd. | Mount Type | Material | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
| 5" | 3 1/2" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA 1910.145, ANSI Z535 | 5 | 0000000 | 00000 |
Machine and Equipment Operation Labels
Communicate dangers to workers near equipment that could cause injury. About the size of an index card, these labels have an adhesive backing, so you can peel and stick them onto machinery, walls, and anywhere else they’re needed.
Labels with danger, warning, and caution headers meet OSHA 1910.145 safety color standards for indicating hazards that could harm workers. Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury.
| Ht. | Wd. | Mount Type | Material | Temp. Range, °F | Pkg. Qty. | Pkg. | |
Danger—Do Not Operate (English) | |||||||
|---|---|---|---|---|---|---|---|
| 3 1/2" | 5" | Adhesive Back | Vinyl Plastic | -40° to 170° | 5 | 0000000 | 000000 |