Material Material |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
About Durometer Hardness Scales
More
Decorative Finishing Nails
Also known as escutcheon pins, these nails have a domed head that sits above the surface. They are corrosion resistant.
| Lg. | Gauge | Shank Dia. | Head Dia. | Head Type | Shank Type | Pkg. Qty. | Pkg. | |
Brass | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4" | 14 | 0.08" | 3/16" | Domed | Smooth | 200 | 000000000 | 00000 |
| 3/8" | 18 | 0.05" | 1/8" | Domed | Smooth | 300 | 000000000 | 0000 |
| 3/8" | 16 | 0.06" | 1/8" | Domed | Smooth | 200 | 000000000 | 0000 |
| 3/8" | 14 | 0.08" | 3/16" | Domed | Smooth | 150 | 000000000 | 0000 |
| 1/2" | 18 | 0.05" | 1/8" | Domed | Smooth | 300 | 000000000 | 0000 |
| 1/2" | 16 | 0.06" | 1/8" | Domed | Smooth | 200 | 000000000 | 0000 |
| 1/2" | 14 | 0.08" | 3/16" | Domed | Smooth | 125 | 000000000 | 0000 |
| 1/2" | 12 | 0.11" | 1/4" | Domed | Smooth | 50 | 000000000 | 0000 |
| 5/8" | 16 | 0.06" | 1/8" | Domed | Smooth | 175 | 000000000 | 0000 |
| 3/4" | 18 | 0.05" | 1/8" | Domed | Smooth | 250 | 000000000 | 0000 |
| 3/4" | 16 | 0.06" | 1/8" | Domed | Smooth | 150 | 000000000 | 0000 |
| 3/4" | 14 | 0.08" | 3/16" | Domed | Smooth | 100 | 000000000 | 0000 |
| 3/4" | 12 | 0.11" | 1/4" | Domed | Smooth | 50 | 000000000 | 0000 |
| 1" | 18 | 0.05" | 1/8" | Domed | Smooth | 175 | 000000000 | 0000 |
| 1" | 16 | 0.06" | 1/8" | Domed | Smooth | 100 | 000000000 | 0000 |
| 1" | 14 | 0.08" | 3/16" | Domed | Smooth | 75 | 000000000 | 0000 |
| 1 1/4" | 14 | 0.08" | 3/16" | Domed | Smooth | 50 | 000000000 | 0000 |
| 1 1/2" | 14 | 0.08" | 3/16" | Domed | Smooth | 25 | 000000000 | 0000 |
Decorative Finishing Nails for Hard Woods
The domed head sits above the surface. Also known as spiral-shank nails, the shank turns as you drive, so these nails provide a strong hold in hard woods such as birch, oak, and maple. The zinc-plated finish provides rust resistance.
Screw Nails for Metal, Plastic, and Plywood
Also known as round-head Type U drive screws, these fasteners drive like nails but hold with screw-like strength. Use them in drilled and punched holes. The hole size should be slightly smaller than the shank diameter.
Zinc-plated steel screw nails resist rust.
18-8 stainless steel screw nails have good corrosion resistance and may be mildly magnetic.
| Size | Lg. | Shank Dia. | Head Dia. | Head Type | Shank Type | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 00 | 1/8" | 0.06" | 3/32" | Domed | Screw | 100 | 000000000 | 00000 |
| 00 | 3/16" | 0.06" | 3/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 00 | 1/4" | 0.06" | 3/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 00 | 3/8" | 0.06" | 3/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 0 | 1/8" | 0.08" | 1/8" | Domed | Screw | 100 | 000000000 | 0000 |
| 0 | 3/16" | 0.08" | 1/8" | Domed | Screw | 100 | 000000000 | 0000 |
| 0 | 1/4" | 0.08" | 1/8" | Domed | Screw | 100 | 000000000 | 0000 |
| 0 | 3/8" | 0.08" | 1/8" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 1/8" | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 3/16" | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 1/4" | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 5/16" | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 3/8" | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 1/2" | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 4 | 3/16" | 0.12" | 7/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 4 | 1/4" | 0.12" | 7/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 4 | 5/16" | 0.12" | 7/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 4 | 3/8" | 0.12" | 7/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 6 | 1/4" | 0.14" | 1/4" | Domed | Screw | 100 | 000000000 | 0000 |
| 6 | 5/16" | 0.14" | 1/4" | Domed | Screw | 100 | 000000000 | 0000 |
| 6 | 3/8" | 0.14" | 1/4" | Domed | Screw | 100 | 000000000 | 0000 |
| 7 | 5/16" | 0.15" | 9/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 7 | 3/8" | 0.15" | 9/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 7 | 1/2" | 0.15" | 9/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 8 | 1/4" | 0.17" | 5/16" | Domed | Screw | 100 | 000000000 | 0000 |
| 8 | 3/8" | 0.17" | 5/16" | Domed | Screw | 100 | 000000000 | 0000 |
| 8 | 1/2" | 0.17" | 5/16" | Domed | Screw | 100 | 000000000 | 0000 |
| 8 | 5/8" | 0.17" | 5/16" | Domed | Screw | 100 | 000000000 | 0000 |
| 10 | 3/8" | 0.18" | 11/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 10 | 1/2" | 0.18" | 11/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 10 | 5/8" | 0.18" | 11/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 12 | 1/2" | 0.21" | 13/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 12 | 3/4" | 0.21" | 13/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 14 | 1/2" | 0.24" | 7/16" | Domed | Screw | 100 | 000000000 | 0000 |
| 14 | 3/4" | 0.24" | 7/16" | Domed | Screw | 100 | 000000000 | 0000 |
18-8 Stainless Steel | ||||||||
| 00 | 1/8" | 0.06" | 3/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 00 | 3/16" | 0.06" | 3/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 00 | 1/4" | 0.06" | 3/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 00 | 3/8" | 0.06" | 3/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 0 | 1/8" | 0.08" | 1/8" | Domed | Screw | 100 | 000000000 | 0000 |
| 0 | 3/16" | 0.08" | 1/8" | Domed | Screw | 100 | 000000000 | 0000 |
| 0 | 1/4" | 0.08" | 1/8" | Domed | Screw | 100 | 000000000 | 0000 |
| 0 | 3/8" | 0.08" | 1/8" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 1/8" | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 3/16" | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 1/4" | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 5/16" | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 3/8" | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 1/2" | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 4 | 3/16" | 0.12" | 7/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 4 | 1/4" | 0.12" | 7/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 4 | 5/16" | 0.12" | 7/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 4 | 3/8" | 0.12" | 7/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 6 | 1/4" | 0.14" | 1/4" | Domed | Screw | 100 | 000000000 | 0000 |
| 6 | 5/16" | 0.14" | 1/4" | Domed | Screw | 100 | 000000000 | 0000 |
| 6 | 3/8" | 0.14" | 1/4" | Domed | Screw | 100 | 000000000 | 0000 |
| 8 | 1/4" | 0.17" | 5/16" | Domed | Screw | 100 | 000000000 | 0000 |
| 8 | 3/8" | 0.17" | 5/16" | Domed | Screw | 100 | 000000000 | 0000 |
| 8 | 1/2" | 0.17" | 5/16" | Domed | Screw | 100 | 000000000 | 0000 |
| 8 | 5/8" | 0.17" | 5/16" | Domed | Screw | 100 | 000000000 | 00000 |
| 10 | 3/8" | 0.18" | 11/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 10 | 1/2" | 0.18" | 11/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 10 | 5/8" | 0.18" | 11/32" | Domed | Screw | 100 | 000000000 | 00000 |
| 12 | 1/2" | 0.21" | 13/32" | Domed | Screw | 100 | 000000000 | 0000 |
Tack Bumpers
Install with a few taps of a hammer. In addition to protecting soft materials such as wood, fiberboard, and plastic, these bumpers are commonly used on table and chair legs to safeguard floors. Made of SBR rubber, all of these bumpers have good abrasion and moisture resistance. They also have a medium-hard rating to withstand high levels of impact.
Style 1 bumpers have a rounded top.
Style 2 bumpers have a flat top.
For technical drawings and 3-D models, click on a part number.
Tack | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Ht. | Dia. | Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Pkg. Qty. | Pkg. | |
Style 1 | ||||||||||||
SBR Rubber | ||||||||||||
| 3/8" | 7/32" | 3/64" | 3/8" | -20° to 180° | No | Medium Hard | Durometer 65A | No | Black | 50 | 00000000 | 00000 |
| 1/2" | 1/4" | 3/64" | 3/8" | -20° to 180° | No | Medium Hard | Durometer 65A | No | Black | 50 | 00000000 | 00000 |
| 5/8" | 5/16" | 3/64" | 3/8" | -20° to 180° | No | Medium Hard | Durometer 65A | No | Black | 50 | 00000000 | 00000 |
| 3/4" | 3/8" | 3/64" | 3/8" | -20° to 180° | No | Medium Hard | Durometer 65A | No | Black | 50 | 00000000 | 00000 |
| 7/8" | 7/16" | 3/64" | 11/32" | -20° to 180° | No | Medium Hard | Durometer 65A | No | Black | 25 | 00000000 | 0000 |
Style 2 | ||||||||||||
SBR Rubber | ||||||||||||
| 3/8" | 7/32" | 3/64" | 3/8" | -20° to 180° | No | Medium Hard | Durometer 65A | No | Black | 50 | 0000000 | 0000 |
| 1/2" | 1/4" | 3/64" | 3/8" | -20° to 180° | No | Medium Hard | Durometer 65A | No | Black | 50 | 0000000 | 00000 |
| 5/8" | 5/16" | 3/64" | 3/8" | -20° to 180° | No | Medium Hard | Durometer 65A | No | Black | 50 | 0000000 | 00000 |
| 3/4" | 3/8" | 3/64" | 3/8" | -20° to 180° | No | Medium Hard | Durometer 65A | No | Black | 50 | 0000000 | 00000 |
| 7/8" | 7/16" | 3/64" | 11/32" | -20° to 180° | No | Medium Hard | Durometer 65A | No | Black | 25 | 0000000 | 0000 |
V-Belts
