These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.

To prevent accidental opening, these latches have a safety catch.

These latches are typically used to secure hoods and covers.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

No need for a strike plate, these latches hook into a lip or notch.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

Each latch comes with a variety of strike plates for different mounting options.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

Add a padlock to secure these latches, which reach around corners to pull two surfaces together.

Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.

Adjust the latching distance to compensate for gasketing and misalignment.

Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.

Lift and turn the handle 180° to open and close this lock.

Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.

Turn the screw on the latch to adjust the gripping force on the strike plate.

Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.

Close and open these grab latches with a push—there's no need for a handle.

These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.

Doors stay closed with the pressure of rollers against the strike plate.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

These latches withstand temperatures up to 480° or 570° F.

When released, the spring-loaded ring handle returns to its recessed position to stay out of the way.

Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.

Operate these padlockable latches from either side of the door—there is a handle on both sides.

An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.

An emergency release handle offers a means of escape if the door closes with someone inside an enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

Mount these hasps around complex curves, angles, and corners that other corner hasps can't reach.

Mount these padlockable eyes on the inside edge of a door and door frame.

Choose these hasps if you need hasps that each open with a different key.

The mounting screws on these latches are concealed to prevent tampering.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.

Use these latches with three-point locking systems, such as those on filing cabinet doors.

The mounting screws on these latches are concealed to prevent tampering.

These latches are IP65 rated for protection against dust, dirt, and washdowns.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

Fold the ring handle into the recess to stay out of the way when not in use.

Designed for use in 1/4" or 1/2" dia. through holes.

Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.

These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Made of plastic, these locks are suitable for damp and humid environments.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Meet U.S. postal service guidelines for mailbox locks.

Designed for use in 1/2" dia. through holes.

These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.

Without a keyway, you don't have to worry about these magnetic locks being picked or memorizing combinations. They are water-tight, so they resist snow, dirt, and other contaminants.

Made of plastic, these locks are suitable for damp and humid environments.

A stainless steel shutter blocks rain, snow, and dirt from entering the cylinder where they can cause internal damage.

Open each of these locks with a different key.

These locks are IP65 rated for protection against dust, dirt, and washdowns.

The mounting screws on these locks are concealed to prevent tampering.

Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

The mounting screws on these locks are concealed to prevent tampering.

Open these locks with both a master key and their own unique key.

These locks are IP65 rated for protection against dust, dirt, and washdowns.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated.

No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.

The mounting screws on these latches are concealed to prevent tampering.

A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches.

The strike has angled ends so these latches can accept their bolt even when doors become misaligned.