Opening/Closing Action Opening/Closing Action |
|---|
|
Specifications Met Specifications Met |
|---|
|
About Door Closers
When replacing an existing closer, remove the cover and match the model number and/or mounting hole pattern to a closer in our offering. Or, use one of our closers and a universal mounting plate that matches most hole patterns.
If you are installing a new closer, choose one that works for your door width. Due to added resistance from wind, closers typically accommodate smaller exterior doors than interior doors.
There are three typical mounting positions for door closers; many of our closers are versatile and can be mounted in any of these positions. To determine opening direction, stand on the side of the door where the closer will be mounted. If the door opens towards you it opens in; opens away from you it opens out.
Door Mount, Opens In—Also known as regular arm mount, this position allows the door to open in toward the closer.
Door Mount, Opens Out—Also known as parallel arm mount, the arm lays parallel with the door in the closed position.
Frame Mount, Opens Out—Also known as top frame mount, this position is often used for exterior doors.
Replacement Arms for Door Closers
Save time and money by replacing worn or damaged arms instead of the entire closer. These arms are reversible for right or left door-swing directions. All meet ANSI A156.4 Grade 1 durability, strength, and performance standards for door controls. They also meet UL 10C for fire-rated doors, which meet positive pressure fire test standards.
Use free-moving arms with free-moving closers that pull doors shut after you've opened them. Arms with a built-in stop prevent doors from opening too far.
Use hold-open arms with hold-open closers, which hold doors open until you close them with a slight push or pull on the door.
For Door Wd. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Interior | Exterior | For Door Swing Direction | Opening/Closing Action | Range of Motion | Mounting Hardware Included | Specifications Met | Features | Finish | Each | |
Norton 1601 | ||||||||||
| 33"-52" | 30"-48" | Reversible | Free Moving | 180° | Yes | ANSI A156.4 Grade 1 UL 10C for Fire-Rated Doors UL Listed | __ | Gray | 00000000 | 000000 |
Norton 8301 | ||||||||||
| 30"-48" | 30"-48" | Reversible | Free Moving | 180° | Yes | ANSI A156.4 Grade 1 UL 10C for Fire-Rated Doors UL Listed | __ | Gray | 000000000 | 00000 |
LCN 1460/1461 | ||||||||||
| 24"-60" | 24"-48" | Reversible | Free Moving | 110° | Yes | ANSI A156.4 Grade 1 UL 10C for Fire-Rated Doors UL Listed | Built-In Stop | Gray | 0000000 | 000000 |
| 24"-60" | 24"-48" | Reversible | Hold Open | 180° | Yes | ANSI A156.4 Grade 1 UL 10C for Fire-Rated Doors UL Listed | __ | Gray | 0000000 | 00000 |
LCN 4040XP | ||||||||||
| 24"-60" | 24"-48" | Reversible | Hold Open | 120° | Yes | ANSI A156.4 Grade 1 UL 10C for Fire-Rated Doors UL Listed | __ | Gray | 0000000 | 000000 |