Use these latches with three-point locking systems, such as those on filing cabinet doors.

The mounting screws on these latches are concealed to prevent tampering.

Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Press the button and the handle snaps open; push the handle shut for a secure hold.

These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

Designed for use in 1/2" dia. through holes.

Raise the handle and it swings smoothly for easy latching and unlatching.

With a flat inset grip, the handle is recessed to stay out of the way.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Designed for use in 1/2" dia. through holes.

Designed for use in 1/2" dia. through holes.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Designed for use in 1/2" dia. through holes.

Designed for use in 1/2" dia. through holes.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.

These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

A red indicator on the lock face is visible when unlocked and hidden when locked.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

The mounting screws on these locks are concealed to prevent tampering.

In addition to an IP65 rating for washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.

The mounting screws on these locks are concealed to prevent tampering.

Open multiple locks with the same key.

The mounting screws on these locks are concealed to prevent tampering.

The mounting screws on these locks are concealed to prevent tampering.

With a molded inset grip, the handle remains recessed to stay out of the way.

Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.

Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated.

Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code.

Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.

These latches are adjustable; push the ball in and rotate it to adjust force as well as compensate for misalignment.

An electrical switch allows these latches to power a light or other signal to indicate whether a door is open or closed.

Turn the screw on the latch to adjust the gripping force on the strike plate.

There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.

To prevent doors from slamming, these latches are hydraulic.

Magnetic force holds doors closed.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.

Keep doors on refrigerators and industrial enclosures closed.

Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers.

Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.

Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.

An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.

No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

Slide the bolt and drop the knob into the notch to secure.

Bolts are spring-loaded to stay latched until you activate the pull.