For a tight fit, the seal projection can be adjusted.

The magnetic insert provides a tight seal on metal doors.

No need to drill mounting holes, this weatherstripping has a peel-and-stick adhesive backing.

A drip guard diverts rain and snow away from the bottom of the door.

In addition to mounting to the door's face, this weatherstripping fits into cutouts (mortises) to mount flush with the door.

A drip guard diverts rain and snow away from the bottom of the door.

Sets include six pieces of weatherstripping for an overhead door—two for the top and four for the sides to seal gaps.

Seal the space between your double doors.

These thresholds have a seal to provide protection from the elements. With a ribbed top, they offer more slip resistance than smooth-top thresholds.

An antislip coating adds another layer of slip resistance to these thresholds.

The middle of these three-piece thresholds can be installed smooth or ribbed side up for more slip resistance.

To provide more protection from the elements than dock door seals, these shelters wrap around trailers.

Create a frosted effect on windows to block the view.

Dim incoming light while reducing heat transfer through your windows. In the summer, film reflects the sun's heat; in the winter, it minimizes heat loss.

Keep windows from producing flying glass if they break.

These seals are made of solid EPDM foam rubber.

Made of vinyl rubber, these seals also resist salts and detergents. Hollow construction provides compressibility.

Tested in accordance with UL and NFPA standards, these silicone rubber seals are for use on fire-rated doors.

These solid silicone rubber seals also stand up to water and salts.

Made of solid silicone foam rubber, these seals also resist water and salts.

These seals have a solid bulb.

Able to withstand temperatures up to 500° F, these all-rubber silicone seals resist water and salts.

The Buna-N foam rubber bulb on these seals also resists grease, salts, water, steam, and most detergents.

The EPDM rubber wiper is firmer and more durable than the EPDM foam rubber wipers.

Seal stationary windows into place with these EPDM seals. EPDM resists water, sunlight, and ozone.

Firmer and more durable than EPDM foam rubber seals, these seals are made of EPDM rubber. They also resist salts.

Softer and more flexible than EPDM rubber seals, these EPDM foam rubber seals will effortlessly conform to uneven surfaces.

Hollow construction makes these seals more compressible than solid seals.

These hollow seals offer better compressibility than solid seals.

These seals have a strong Inconel core covered with woven silica yarn that’s been treated to withstand temperatures up to 2300° F. They resist most refrigerants, salts, and grease.

The PTFE coating on these fiberglass seals is slippery, so they are easier than the other seals to press fit into oven, furnace, and boiler doors. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 500° F.

The flat edges on these square-profile seals provide more sealing surface than round-profile seals. They’re made of 98% silica to resist temperatures up to 2300° F.

Alumina silicate is loosely woven to create these ceramic seals that are stronger and more flexible than Ultra High- and Low-Temperature Rope Seals. They can handle temperatures from –300° to 2300° F.

Made from tightly woven calcium alumina silicate, these seals can handle temperatures from –300° to 1100° F.

Made of fiberglass, these seals are woven tighter than High-Temperature Ultra-Conformable Slotted Edge Seals for increased durability. They resist grease, oil, hydraulic fluid, and solvents and can withstand temperatures up to 1000° F.

Mount brushes by sliding them into a holder. Holders can be cut to size with a hacksaw.

Brushes are made of FDA listed materials so they can be used for food and beverage conveying.

Brushes have nonstick PTFE bristles for temperatures up to 500° F.

Use scissors to cut these flexible brushes and holders to size.

Brushes are made of FDA listed materials so they can be used for food and beverage conveying.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

Silicone maintains its flexibility across a wide range of temperatures.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

A metal core adds strength and stability, making this trim more durable than other high-temperature rubber trim. It withstands temperatures up to 400° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

With a surface resistivity of 1.4 ohms, this trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of electronics equipment and circuit boards from impact.

This trim has a metal core for added strength and stability. Made of plastic, it's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

This trim withstands temperatures up to 500° F, which is generally twice as high as our other slippery trim. With a slippery surface, it minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant.

With a surface resistivity of 10 ⁵ ohms this trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of plastic, it's also chemical resistant. Use it to protect the edges of of electronics equipment and circuit boards from impact.

This trim meets FMVSS-302 for Federal Motor Vehicle Safety Standards for flammability, UL 94HB flame requirements, and NFPA (National Fire Protection Agency) standards. Made of plastic, it's also chemical resistant. Use it to protect the edges of panels, boards, and signs from impact.

Even in the dark, this black and yellow striped trim draws attention to equipment and obstructions. Designed to cushion during impact, it protects edges on posts, shelving, and other surfaces from damage.

Designed to withstand temperatures up to 800° F, this stainless steel trim is good for use with ovens, boilers, and heat shields. It combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges.

This nylon-coated stainless steel trim combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges. It can also protect wire, cable, and hose.

The raised bulb adds cushioning to absorb more impact than other surface guards to protect walls and other flat surfaces from impact.

Vibrant colors create a visual alert to draw attention to equipment and obstructions. These guards protect walls and other flat surfaces from impact.

These metal guards provide more impact protection than plastic guards. Commonly used in warehouse and manufacturing areas, they protect corners on walls and other surfaces from impact.

Even in the dark, these black and yellow striped guards draw attention to equipment and obstructions. They protect corners on walls, posts, shelving, and other surfaces from damage.

The guards in this system have a metal core for added strength and stability. Combine corner guards and surface guards to create a system that protects walls and equipment from impact and wear. Often used in warehouse and manufacturing areas, these systems protect against damage from carts and vehicles.

Easily attach, move, and replace these magnetic wear strips on metal surfaces to minimize friction—simply press them on and peel them off as needed. Often found on conveyor systems and chutes, use these strips where friction between two parts or materials is wearing down equipment to extend equipment life.

Suitable for food contact, these plates are made of FDA listed UHMW plastic, which has a slippery surface to minimize friction. Often found on conveyor systems, use these plates where friction between two parts or materials is wearing down equipment to extend equipment life.

These aluminum bases provide more impact protection than plastic bases. In addition to protecting the bottom of a wall from damage, they create a finished look where the wall meets the floor. They're commonly used in warehouse and manufacturing areas.

Fortify a door's base as well as its bottom edge to guard them against damage from foot traffic and equipment. These plates can also be used to salvage rusted, rotted, or otherwise damaged doors.

Also known as door plates, armor plates, and mop plates, kick plates protect the base of a door from damage caused by foot traffic and equipment.

Use this film on metal and plastic parts, appliances, and electronic equipment for protection against damage during packaging, shipping, and installation.

Often used to protect sheet metal during fiber and CO2 laser cutting, this film is also good for other fabrication processes such as bending, stamping, and forming. You can even leave this film on finished parts for protection against damage during shipping and storage.

Safeguard pipe, tubing, and other round equipment from damage. Black and yellow stripes create a visual alert to draw attention to equipment and obstructions.

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.

Often used as inner tubes, butyl rubber won’t allow air, fumes, or gases to pass through.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Unlike standard silicone sealants, this silicone sealant can be painted.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal.

Make temporary waterproof seals that peel off when no longer needed.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

Make tough, flexible, oil-resistant seals.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.