For Shaft Diameter For Shaft Diameter |
---|
Width Width |
---|

For Load Direction For Load Direction |
---|
![]() | Combined Radial and Thrust |
![]() | Radial |
For Housing ID For Housing ID |
---|
OD OD |
---|
ID ID |
---|
Maximum Speed Maximum Speed |
---|
|
Lubrication Lubrication |
---|
|
Ball Material Ball Material |
---|
|
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
---|
|
Dynamic Combined Load Capacity Dynamic CombinedLoad Capacity |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Ball and Roller Bearings
More
Angular-Contact Thrust Ball Bearings



Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.
Double-row bearings handle thrust loads in both directions.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Each | |
Double Row | |||||||||||||
Open | |||||||||||||
3200 | 10 | 30 | 14 | Steel | 1,700 | 960 | 22,000 | Required | 30° | -20° to 230° | ABEC-1 | 00000000 | 000000 |
3201 | 12 | 32 | 15.9 | Steel | 2,250 | 1,250 | 20,000 | Required | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3202 | 15 | 35 | 15.9 | Steel | 2,500 | 1,500 | 17,000 | Required | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3203 | 17 | 40 | 17.5 | Steel | 3,200 | 1,950 | 15,000 | Required | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3204 | 20 | 47 | 20.6 | Steel | 4,450 | 2,650 | 14,000 | Required | 30° | -20° to 230° | ABEC-3 | 00000000 | 00000 |
3205 | 25 | 52 | 20.6 | Steel | 4,850 | 3,200 | 12,000 | Required | 30° | -20° to 230° | ABEC-3 | 00000000 | 00000 |
3206 | 30 | 62 | 23.8 | Steel | 6,700 | 4,550 | 10,000 | Required | 30° | -20° to 230° | ABEC-3 | 00000000 | 00000 |
3207 | 35 | 72 | 27 | Steel | 8,950 | 6,250 | 9,000 | Required | 30° | -20° to 230° | ABEC-3 | 00000000 | 00000 |
3208 | 40 | 80 | 30.2 | Steel | 10,600 | 7,600 | 8,000 | Required | 30° | -20° to 230° | ABEC-3 | 00000000 | 00000 |
3210 | 50 | 90 | 30.2 | Steel | 11,400 | 8,750 | 7,000 | Required | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
3303 | 17 | 47 | 22.2 | Steel | 4,850 | 2,850 | 14,000 | Required | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3304 | 20 | 52 | 22.2 | Steel | 5,300 | 3,250 | 13,000 | Required | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
3305 | 25 | 62 | 25.4 | Steel | 7,150 | 4,550 | 11,000 | Required | 30° | -20° to 230° | ABEC-3 | 00000000 | 00000 |
Shielded | |||||||||||||
3200-2Z | 10 | 30 | 14 | Steel | 1,700 | 960 | 24,000 | Lubricated | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3201-2Z | 12 | 32 | 15.9 | Steel | 2,250 | 1,250 | 22,000 | Lubricated | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3202-2Z | 15 | 35 | 15.9 | Steel | 2,500 | 1,500 | 18,000 | Lubricated | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3203-2Z | 17 | 40 | 17.5 | Steel | 3,200 | 1,950 | 16,000 | Lubricated | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3204-2Z | 20 | 47 | 20.6 | Steel | 4,450 | 2,650 | 14,000 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 00000 |
3205-2Z | 25 | 52 | 20.6 | Steel | 4,850 | 3,200 | 12,000 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 00000 |
3206-2Z | 30 | 62 | 23.8 | Steel | 6,700 | 4,550 | 10,000 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 00000 |
3207-2Z | 35 | 72 | 27 | Steel | 8,950 | 6,250 | 9,000 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
3208-2Z | 40 | 80 | 30.2 | Steel | 10,600 | 7,600 | 8,000 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
3210-2Z | 50 | 90 | 30.2 | Steel | 11,400 | 8,750 | 7,000 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
3303-2Z | 17 | 47 | 22.2 | Steel | 4,850 | 2,850 | 14,000 | Lubricated | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3304-2Z | 20 | 52 | 22.2 | Steel | 5,300 | 2,250 | 13,000 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
3305-2Z | 25 | 62 | 25.4 | Steel | 7,150 | 4,550 | 11,000 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
Sealed | |||||||||||||
3200-2RS | 10 | 30 | 14 | Steel | 1,700 | 960 | 17,000 | Lubricated | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3201-2RS | 12 | 32 | 15.9 | Steel | 2,250 | 1,250 | 15,000 | Lubricated | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3202-2RS | 15 | 35 | 15.9 | Steel | 2,500 | 1,500 | 14,000 | Lubricated | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3203-2RS | 17 | 40 | 17.5 | Steel | 3,200 | 1,950 | 12,000 | Lubricated | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3204-2RS | 20 | 47 | 20.6 | Steel | 4,450 | 2,650 | 10,000 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 00000 |
3205-2RS | 25 | 52 | 20.6 | Steel | 4,850 | 3,200 | 8,500 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 00000 |
3206-2RS | 30 | 62 | 23.8 | Steel | 6,700 | 4,550 | 7,500 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 00000 |
3207-2RS | 35 | 72 | 27 | Steel | 8,950 | 6,250 | 6,300 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
3208-2RS | 40 | 80 | 30.2 | Steel | 10,600 | 7,600 | 5,600 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
3210-2RS | 50 | 90 | 30.2 | Steel | 11,400 | 8,750 | 4,800 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
3303-2RS | 17 | 47 | 22.2 | Steel | 4,850 | 2,850 | 11,000 | Lubricated | 30° | -20° to 230° | ABEC-1 | 00000000 | 00000 |
3304-2RS | 20 | 52 | 22.2 | Steel | 5,300 | 2,250 | 9,000 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
3305-2RS | 25 | 62 | 25.4 | Steel | 7,150 | 4,550 | 7,500 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |
Self-Aligning Ball Bearings


With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
108 | 8 | 22 | 7 | Steel | 590 | 120 | 40,000 | Lubricated | 3° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
126 | 6 | 19 | 6 | Steel | 560 | 105 | 30,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
1200 | 10 | 30 | 9 | Steel | 1,200 | 260 | 22,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
1201 | 12 | 32 | 10 | Steel | 1,250 | 280 | 22,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
1202 | 15 | 35 | 11 | Steel | 1,700 | 390 | 18,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
1203 | 17 | 40 | 12 | Steel | 1,750 | 450 | 16,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
1204 | 20 | 47 | 14 | Steel | 2,850 | 760 | 20,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 00000 |
1205 | 25 | 52 | 15 | Steel | 3,200 | 890 | 18,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 00000 |
1206 | 30 | 62 | 16 | Steel | 3,550 | 1,000 | 10,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
1207 | 35 | 72 | 17 | Steel | 3,550 | 1,100 | 8,500 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
1208 | 40 | 80 | 18 | Steel | 4,300 | 1,450 | 7,500 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
1302 | 15 | 42 | 13 | Steel | 2,150 | 510 | 16,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
1304 | 20 | 52 | 15 | Steel | 2,800 | 750 | 12,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
1305 | 25 | 62 | 17 | Steel | 4,050 | 1,100 | 10,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
1306 | 30 | 72 | 19 | Steel | 4,800 | 1,400 | 8,500 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
1307 | 35 | 80 | 21 | Steel | 5,650 | 1,750 | 7,500 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
1308 | 40 | 90 | 23 | Steel | 6,650 | 2,150 | 6,700 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
1310 | 50 | 110 | 27 | Steel | 9,750 | 3,150 | 5,600 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
2200 | 10 | 30 | 14 | Steel | 1,800 | 380 | 34,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 00000 |
2201 | 12 | 32 | 14 | Steel | 1,900 | 420 | 30,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 00000 |
2202 | 15 | 35 | 14 | Steel | 1,950 | 450 | 26,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 00000 |
2203 | 17 | 40 | 16 | Steel | 2,350 | 570 | 24,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 00000 |
2204 | 20 | 47 | 18 | Steel | 3,750 | 930 | 20,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 00000 |
2205 | 25 | 52 | 18 | Steel | 3,750 | 980 | 18,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2206 | 30 | 62 | 20 | Steel | 5,350 | 1,500 | 15,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2207 | 35 | 72 | 23 | Steel | 6,750 | 1,950 | 12,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2208 | 40 | 80 | 23 | Steel | 7,150 | 2,200 | 11,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2211 | 55 | 100 | 25 | Steel | 6,000 | 2,200 | 6,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
2212 | 60 | 110 | 28 | Steel | 7,600 | 2,800 | 5,300 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
2213 | 65 | 120 | 31 | Steel | 9,750 | 3,650 | 4,800 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
2300 | 10 | 35 | 17 | Steel | 2,050 | 450 | 18,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
2302 | 15 | 42 | 17 | Steel | 2,750 | 650 | 14,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
2304 | 20 | 52 | 21 | Steel | 4,050 | 1,050 | 19,000 | Lubricated | 3° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2305 | 25 | 62 | 24 | Steel | 6,050 | 1,550 | 16,000 | Lubricated | 3° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2306 | 30 | 72 | 27 | Steel | 7,000 | 1,950 | 13,000 | Lubricated | 3° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2307 | 35 | 80 | 31 | Steel | 8,900 | 2,500 | 12,000 | Lubricated | 3° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2309 | 45 | 100 | 36 | Steel | 12,350 | 3,750 | 5,600 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
2310 | 50 | 110 | 40 | Steel | 14,600 | 4,500 | 5,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
2311 | 55 | 120 | 43 | Steel | 17,150 | 5,350 | 4,800 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
Sealed | |||||||||||||
2200-2RS | 10 | 30 | 14 | Steel | 1,200 | 260 | 17,000 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2201-2RS | 12 | 32 | 14 | Steel | 1,400 | 320 | 16,000 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2202-2RS | 15 | 35 | 14 | Steel | 1,650 | 390 | 14,000 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2203-2RS | 17 | 40 | 16 | Steel | 1,950 | 490 | 12,000 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2204-2RS | 20 | 47 | 18 | Steel | 2,850 | 760 | 10,000 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2205-2RS | 25 | 52 | 18 | Steel | 3,200 | 890 | 9,000 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2206-2RS | 30 | 62 | 20 | Steel | 3,500 | 1,000 | 7,500 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2207-2RS | 35 | 72 | 23 | Steel | 4,250 | 1,300 | 6,300 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2208-2RS | 40 | 80 | 23 | Steel | 4,450 | 1,550 | 5,600 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2303-2RS | 17 | 47 | 19 | Steel | 2,850 | 760 | 11,000 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2304-2RS | 20 | 52 | 21 | Steel | 3,200 | 890 | 9,000 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2305-2RS | 25 | 62 | 24 | Steel | 4,250 | 1,200 | 7,500 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2306-2RS | 30 | 72 | 27 | Steel | 5,050 | 1,500 | 6,700 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
2307-2RS | 35 | 80 | 31 | Steel | 5,950 | 1,900 | 5,600 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
Tapered Bore Self-Aligning Ball Bearings


For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Radial Load Capacity | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Diameter, mm | For Housing ID, mm | Width, mm | Ring Material | Dynamic | Static, lbs. | Maximum Speed, rpm | Lubrication | Misalignment Capability | Maximum Temperature, °F | Rate of Taper | ABEC Rating | Each | |
Open | ||||||||||||||
1204K | 20 | 47 | 14 | Steel | 2,200 | 580 | 14,000 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 000000 |
1205K | 25 | 52 | 15 | Steel | 2,700 | 740 | 12,000 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 00000 |
1206K | 30 | 62 | 16 | Steel | 3,550 | 1,000 | 10,000 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 00000 |
1207K | 35 | 72 | 17 | Steel | 3,550 | 1,100 | 8,500 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 00000 |
1208K | 40 | 80 | 18 | Steel | 4,300 | 1,450 | 7,500 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 00000 |
1304K | 20 | 52 | 15 | Steel | 2,800 | 750 | 12,000 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 00000 |
2205K | 25 | 52 | 18 | Steel | 2,750 | 770 | 12,000 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 00000 |
2208K | 40 | 80 | 23 | Steel | 5,000 | 1,650 | 7,500 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 00000 |
2209K | 45 | 85 | 23 | Steel | 5,200 | 1,800 | 7,100 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 00000 |
2211K | 55 | 100 | 25 | Steel | 6,000 | 2,200 | 6,000 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 000000 |
2306K | 30 | 72 | 27 | Steel | 7,150 | 1,950 | 8,000 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 00000 |
2309K | 45 | 100 | 36 | Steel | 12,350 | 3,750 | 5,600 | Required | 4° | 240° | 1:12 | ABEC-1 | 0000000 | 000000 |
High-Load Plastic Ball Bearings

With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings. They’re commonly used in bottle-filling machines and other food-processing applications. The acetal body doesn’t absorb water, so it can operate in liquids or be washed down without losing strength. The balls are made of either glass or 316 stainless steel—both materials are corrosion resistant. Since there’s no metal-on-metal contact between the balls and the body, these bearings don’t require lubrication.
For technical drawings and 3-D models, click on a part number.
Radial Load Capacity, lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Diameter | For Housing ID | Width | Ring Material | Dynamic | Static | Maximum Speed, rpm | Lubrication | Temperature Range, °F | ABEC Rating | Each | |
316 Stainless Steel Balls | ||||||||||||
Open | ||||||||||||
R4 | 1/4" | 5/8" | 3/8" | Acetal Plastic | 50 | 30 | 1,800 | Not Required | -40° to 180° | Not Rated | 00000000 | 000000 |
R4 | 1/4" | 3/4" | 3/8" | Acetal Plastic | 50 | 30 | 1,800 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
R6 | 3/8" | 7/8" | 7/16" | Acetal Plastic | 60 | 40 | 1,200 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
R8 | 1/2" | 1 1/8" | 7/16" | Acetal Plastic | 70 | 60 | 900 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
R10B | 3/8" | 1 3/8" | 7/16" | Acetal Plastic | 65 | 50 | 1,000 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
R10B | 5/8" | 1 3/8" | 7/16" | Acetal Plastic | 85 | 65 | 800 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
R12 | 3/4" | 1 5/8" | 5/8" | Acetal Plastic | 100 | 80 | 600 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
R16 | 1" | 2" | 3/4" | Acetal Plastic | 125 | 110 | 500 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
R16 | 1 1/4" | 2" | 3/4" | Acetal Plastic | 125 | 110 | 500 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
R20 | 1 1/4" | 2 1/4" | 3/4" | Acetal Plastic | 125 | 110 | 500 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
A5200-6 | 10mm | 30mm | 14mm | Acetal Plastic | 75 | 60 | 900 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
A5201-6 | 12mm | 32mm | 16mm | Acetal Plastic | 75 | 60 | 900 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
A5202-6 | 15mm | 35mm | 16mm | Acetal Plastic | 85 | 65 | 800 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
A5203-6 | 17mm | 40mm | 17mm | Acetal Plastic | 85 | 65 | 800 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
A5204-6 | 20mm | 47mm | 21mm | Acetal Plastic | 100 | 80 | 600 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
A5205-6 | 25mm | 52mm | 21mm | Acetal Plastic | 125 | 110 | 500 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
A5206-6 | 30mm | 62mm | 33mm | Acetal Plastic | 150 | 130 | 500 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
Glass Balls | ||||||||||||
Open | ||||||||||||
R4A | 1/4" | 3/4" | 3/8" | Acetal Plastic | 50 | 30 | 1,800 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
R8 | 1/2" | 1 1/8" | 7/16" | Acetal Plastic | 75 | 60 | 900 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
R8 | 5/8" | 1 3/8" | 7/16" | Acetal Plastic | 65 | 54 | 1,000 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
R10B | 1/2" | 1 3/8" | 7/16" | Acetal Plastic | 85 | 65 | 800 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
R16 | 1" | 2" | 3/4" | Acetal Plastic | 125 | 110 | 500 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
Spherical-Roller Bearings

Two rows of rollers give these bearings dynamic radial load capacities over five times higher than comparably sized tapered-roller bearings. Also known as rock crusher bearings, they handle heavy shock loads and are used for metal milling machinery, mining and oil field equipment, and in paper mills.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Bearing Trade Number | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Max. Temp. Range, °F | Each | |
Open | |||||||||||
25 | 52 | 18 | 22205 | Steel | 8,400 | 8,300 | 7,100 | Required | 390 | 000000 | 0000000 |
30 | 62 | 20 | 22206 | Steel | 11,200 | 11,200 | 6,000 | Required | 390 | 000000 | 000000 |
35 | 72 | 23 | 22207 | Steel | 15,500 | 15,900 | 5,300 | Required | 390 | 000000 | 000000 |
40 | 80 | 23 | 22208 | Steel | 25,400 | 22,300 | 6,700 | Required | 390 | 000000 | 000000 |
40 | 90 | 33 | 22308 | Steel | 35,000 | 33,400 | 7,600 | Required | 212 | 0000000 | 000000 |
45 | 85 | 23 | 22209 | Steel | 26,500 | 24,900 | 6,000 | Required | 390 | 000000 | 000000 |
45 | 100 | 36 | 22309 | Steel | 42,000 | 41,000 | 6,800 | Required | 212 | 0000000 | 000000 |
50 | 90 | 23 | 22210 | Steel | 24,500 | 24,000 | 9,800 | Required | 212 | 0000000 | 000000 |
50 | 110 | 40 | 22310 | Steel | 51,250 | 50,000 | 6,300 | Required | 212 | 0000000 | 000000 |
55 | 100 | 25 | 22211 | Steel | 33,400 | 32,300 | 5,300 | Required | 390 | 000000 | 000000 |
60 | 110 | 28 | 22212 | Steel | 40,000 | 39,100 | 4,800 | Required | 390 | 000000 | 000000 |
65 | 120 | 31 | 22213 | Steel | 49,500 | 51,500 | 4,300 | Required | 390 | 000000 | 000000 |
65 | 140 | 48 | 22313 | Steel | 78,500 | 82,000 | 5,000 | Required | 212 | 0000000 | 000000 |
70 | 125 | 31 | 22214 | Steel | 50,500 | 52,000 | 4,000 | Required | 390 | 0000000 | 000000 |
70 | 150 | 51 | 22314 | Steel | 87,500 | 87,500 | 4,800 | Required | 212 | 0000000 | 000000 |
75 | 130 | 31 | 22215 | Steel | 53,500 | 54,750 | 4,000 | Required | 390 | 0000000 | 000000 |
80 | 140 | 33 | 22216 | Steel | 59,250 | 61,750 | 3,600 | Required | 390 | 0000000 | 000000 |
85 | 150 | 36 | 22217 | Steel | 69,500 | 73,000 | 3,400 | Required | 390 | 0000000 | 000000 |
90 | 160 | 40 | 22218 | Steel | 80,750 | 88,750 | 3,200 | Required | 390 | 0000000 | 000000 |
95 | 170 | 43 | 22219 | Steel | 93,250 | 101,000 | 3,000 | Required | 390 | 0000000 | 000000 |
100 | 180 | 46 | 22220 | Steel | 102,000 | 110,000 | 2,800 | Required | 390 | 0000000 | 000000 |
110 | 200 | 53 | 22222 | Steel | 136,000 | 145,000 | 2,600 | Required | 390 | 0000000 | 000000 |
Mounted Roller Bearings
Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.
Use needle-roller bearings with hardened and ground shafts.
Bearings with aluminum housing are more corrosion resistant than bearings with a cast iron housing.
Self-aligning bearings compensate for shaft misalignment.
Sealed bearings block out dust and contaminants.
For technical drawings and 3-D models, click on a part number.

Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Steel Bearings with Aluminum Housing—Shaft Mount Type: Press Fit | ||||||||||||||
1/4" | 9/16" | 1 1/8" | 2 1/4" | 7/16" | 9/32" | 1 3/4" | 570 | 470 | 21,000 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
5/16" | 9/16" | 1 1/8" | 2 1/4" | 5/8" | 9/32" | 1 3/4" | 650 | 590 | 17,400 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
3/8" | 9/16" | 1 1/8" | 2 1/4" | 5/8" | 9/32" | 1 3/4" | 650 | 610 | 15,000 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1/2" | 3/4" | 1 9/16" | 3 1/4" | 25/32" | 11/32" | 2 1/2" | 1,000 | 1,200 | 11,400 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
5/8" | 3/4" | 1 9/16" | 3 1/4" | 55/64" | 11/32" | 2 1/2" | 1,800 | 2,700 | 9,600 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
3/4" | 1 1/4" | 2 9/16" | 5" | 29/32" | 9/16" | 4" | 2,200 | 2,800 | 7,800 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
6mm | 14.5mm | 28.5mm | 57mm | 11.2mm | 7mm | 44.5mm | 450 | 370 | 21,900 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
8mm | 14.5mm | 28.5mm | 57mm | 16.3mm | 7mm | 44.5mm | 610 | 580 | 17,700 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
10mm | 14.5mm | 28.5mm | 57mm | 16.3mm | 7mm | 44.5mm | 980 | 1,100 | 14,580 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
12mm | 19mm | 39.5mm | 82.5mm | 20mm | 8.7mm | 63.5mm | 1,100 | 1,350 | 12,420 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |

Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Dynamic Thrust Load Cap., lbs. | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Steel Bearings with Cast Iron Housing—Shaft Mount Type: Set Screw | ||||||||||||||||
1 1/4" | 1 1/2" | 3" | 6" | 2 3/4" | 19/32" | 9/16" | 4 25/32" | 3,800 | 15,700 | 2,000 | 4,400 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 0000000 |
1 3/8" | 1 7/8" | 3 3/4" | 7 3/8" | 3" | 3/4" | 5/8" | 5 3/4" | 6,100 | 26,000 | 2,550 | 3,800 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
1 1/2" | 2 1/8" | 4 1/4" | 7 7/8" | 3 3/8" | 3/4" | 5/8" | 6 1/4" | 7,850 | 33,000 | 2,550 | 3,300 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
1 5/8" | 2 1/8" | 4 1/4" | 7 7/8" | 3 3/8" | 3/4" | 5/8" | 6 1/4" | 7,850 | 33,000 | 2,550 | 3,300 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
1 3/4" | 2 1/4" | 4 1/2" | 8 7/8" | 3 1/2" | 7/8" | 3/4" | 7" | 10,300 | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
1 7/8" | 2 1/4" | 4 1/2" | 8 7/8" | 3 1/2" | 7/8" | 3/4" | 7" | 10,300 | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
2" | 2 1/4" | 4 1/2" | 8 7/8" | 3 1/2" | 7/8" | 3/4" | 7" | 10,300 | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
2 1/4" | 2 3/4" | 5 23/32" | 10 1/2" | 4" | 7/8" | 3/4" | 8 1/2" | 11,600 | 54,000 | 3,450 | 2,400 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
2 1/2" | 2 3/4" | 5 23/32" | 10 1/2" | 4" | 7/8" | 3/4" | 8 1/2" | 11,600 | 54,000 | 3,450 | 2,400 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
2 3/4" | 3 1/8" | 6 1/4" | 12" | 4 1/2" | 1" | 27/32" | 9 1/2" | 12,300 | 61,000 | 5,150 | 2,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
3" | 3 1/8" | 6 1/4" | 12" | 4 1/2" | 1" | 27/32" | 9 1/2" | 12,300 | 61,000 | 5,150 | 2,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
3 1/2" | 3 3/4" | 7 1/2" | 14" | 5" | 1 3/16" | 1" | 11" | 19,600 | 108,000 | 5,150 | 1,600 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |
4" | 4 1/4" | 8 1/2" | 15 1/4" | 6 1/4" | 1 1/8" | 7/8" | 12 1/2" | 26,900 | 154,000 | 6,900 | 1,500 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |
35mm | 1 7/8" | 3 3/4" | 7 3/8" | 3" | 3/4" | 5/8" | 5 3/4" | 6,100 | 26,000 | 2,550 | 3,800 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
40mm | 2 1/8" | 4 1/4" | 7 7/8" | 3 3/8" | 3/4" | 5/8" | 6 1/4" | 7,850 | 33,000 | 2,550 | 3,300 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
45mm | 2 1/4" | 4 1/2" | 8 7/8" | 3 1/2" | 7/8" | 3/4" | 7" | 10,300 | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
50mm | 2 1/4" | 4 1/2" | 8 7/8" | 3 1/2" | 7/8" | 3/4" | 7" | 10,300 | 43,000 | 2,550 | 3,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
55mm | 2 1/2" | 5" | 9 5/8" | 3 3/4" | 7/8" | 3/4" | 7 3/4" | 10,900 | 48,200 | 3,450 | 2,700 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
60mm | 2 3/4" | 5 23/32" | 10 1/2" | 4" | 7/8" | 3/4" | 8 1/2" | 11,600 | 54,000 | 3,450 | 2,400 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
65mm | 2 3/4" | 5 23/32" | 10 1/2" | 4" | 7/8" | 3/4" | 8 1/2" | 11,600 | 54,000 | 3,450 | 2,400 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
70mm | 3 1/8" | 6 1/4" | 12" | 4 1/2" | 1" | 27/32" | 9 1/2" | 12,300 | 61,000 | 5,150 | 2,000 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 000000 |
80mm | 3 3/4" | 7 1/2" | 14" | 5" | 1 3/16" | 1" | 11" | 19,600 | 108,000 | 5,150 | 1,600 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |
90mm | 3 3/4" | 7 1/2" | 14" | 5" | 1 3/16" | 1" | 11" | 19,600 | 108,000 | 5,150 | 1,600 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |
100mm | 4 1/4" | 8 1/2" | 15 1/4" | 6 1/4" | 1 1/8" | 7/8" | 12 1/2" | 26,900 | 154,000 | 6,900 | 1,500 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 00000000 |