For Use On For Use On |
|---|
|
|
Mill Diameter Mill Diameter |
|---|
|
|
|
Mill Thickness Mill Thickness |
|---|
|
|
|
Material Material |
|---|
|
Finish Finish |
|---|
|
For Machine Type For Machine Type |
|---|
|
Vise Component Vise Component |
|---|
|
High-Speed Steel Dovetail End Mills
Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. They create dovetail slots for connecting two components with a sliding fit.
Mill | ||||||
|---|---|---|---|---|---|---|
| Dia. | Thick. | Shank Dia. | O'all Lg. | For Use On | Each | |
Uncoated | ||||||
45° Chamfer Angle | ||||||
| 3/8" | 1/8" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
| 1/2" | 1/8" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 3/4" | 3/16" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 1 3/8" | 3/8" | 5/8" | 2 7/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 1 7/8" | 1/2" | 7/8" | 3 1/4" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
60° Chamfer Angle | ||||||
| 3/8" | 3/16" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 1/2" | 7/32" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 3/4" | 5/16" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 1 3/8" | 9/16" | 5/8" | 2 7/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 1 7/8" | 13/16" | 7/8" | 3 1/4" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
Carbide Dovetail End Mills for O-Rings
Create dovetail grooves that allow O-rings to flex without falling out of place. Made of solid carbide, they are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking.
Mill | ||||||||
|---|---|---|---|---|---|---|---|---|
| For O-Ring Wd. | Dia. | Thick. | Shank Dia. | Overall Lg. | Flute Spacing | For Use On | Each | |
Uncoated | ||||||||
2 Flute—24° Chamfer Angle | ||||||||
| 0.07" | 0.086" | 0.051" | 3/16" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
| 0.093" | 0.126" | 0.075" | 3/16" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 1.78mm | 1.8mm | 1.3mm | 4.8mm | 63.5mm | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
3 Flute—24° Chamfer Angle | ||||||||
| 0.103" | 0.14" | 0.082" | 3/16" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 0.125" | 0.177" | 0.102" | 1/4" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 0.139" | 0.18" | 0.112" | 1/4" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 0.187" | 0.279" | 0.154" | 5/16" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 0.21" | 0.293" | 0.172" | 5/16" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 0.25" | 0.356" | 0.212" | 3/8" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 0.275" | 0.369" | 0.232" | 3/8" | 2 1/2" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 0.375" | 0.497" | 0.317" | 1/2" | 3" | Equal | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
Carbide Dovetail End Mills for Dovetail Milling Vises
Cut dovetail notches into your workpiece for use with our Dovetail Milling-Machine Vises. Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking.
Mill | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Thick. | Shank Dia. | Overall Lg. | Flute Spacing | For Use On | Each | |
Titanium Carbonitride (TiCN) Coated | |||||||
4 Flute—60° Chamfer Angle | |||||||
| 3/4" | 1/8" | 3/4" | 3" | Equal | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 000000 | 0000000 |
| 1 1/8" | 3/4" | 3/4" | 3 1/2" | Equal | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 000000 | 000000 |
Cobalt Steel Dovetail End Mills
With better heat and wear resistance than high-speed steel, these cobalt steel dovetail cutters run at higher speeds and provide better performance on hard material. Use them to create dovetail slots for connecting two components with a sliding fit.
Mill | ||||||
|---|---|---|---|---|---|---|
| Dia. | Thick. | Shank Dia. | Overall Lg. | For Use On | Each | |
Uncoated | ||||||
45° Chamfer Angle | ||||||
| 3/8" | 1/8" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
| 1/2" | 1/8" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 3/4" | 3/16" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 1 3/8" | 3/8" | 5/8" | 2 7/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 1 7/8" | 1/2" | 7/8" | 3 1/4" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
60° Chamfer Angle | ||||||
| 3/8" | 3/16" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 1/2" | 7/32" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 3/4" | 5/16" | 3/8" | 2 1/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 1 3/8" | 9/16" | 5/8" | 2 7/8" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 00000 |
| 1 7/8" | 13/16" | 7/8" | 3 1/4" | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | 0000000 | 000000 |
Dovetail Milling-Machine Vises
Designed to hold parts on 4- and 5-axis milling machines, these vises provide rigid clamping while exposing five full sides of the workpiece. This allows even complex parts to be completed in a single operation.
Vises require a dovetail and locating slot to be cut into the bottom side of your material. The dovetail-shaped jaws grip the matching dovetail in your material for consistent locating and high repeatability. Use a Carbide Dovetail End Mill to cut dovetail notches into your material.
While the vises can be mounted directly to some machines or rotary tables, most will require an adapter plate.
Adapter plates have a variety of slots for mounting compatibility with the majority of milling machines and rotary tables.
Risers raise the vise off a machine or rotary table. Risers are compatible with the adapter plates.
For technical drawings and 3-D models, click on a part number.
For Max. Workpiece | Dovetail | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Weight, lbs. | Ht. | Angle | Dia. | Lg. | Wd. | Overall Ht. | Body Material | Clamp Material | Mounting Fasteners Included | Each | |
| 5 13/16" | 5 13/16" | 5 13/16" | 18 | 1/8" | 60° | 4.97" | __ | __ | 3" | Aluminum | Stainless Steel | Yes | 000000 | 0000000 |
| 6 3/4" | 6 3/4" | 6 3/4" | 30 | 1/8" | 60° | 4.97" | __ | __ | 3" | Aluminum | Stainless Steel | Yes | 000000 | 000000 |
| 8" | 10" | 10" | 80 | 3/16" | 60° | __ | 5.95" | 5" | 2 1/2" | Aluminum | Stainless Steel | Yes | 000000 | 00000000 |
Dovetail | Slots | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Ht. | Angle | No. of | Lg. | Wd. | Temp. Range, °F | Each | |
6061 Aluminum | ||||||||||
3/4" Wide Dovetail | ||||||||||
| 3 1/4" | 3 1/4" | 3 1/4" | 1/8" | 60° | 1 | 13/32" | 9/32" | -320° to 300° | 0000000 | 000000 |
| 5 13/16" | 5 13/16" | 5 13/16" | 1/8" | 60° | 1 | 13/32" | 9/32" | -320° to 300° | 0000000 | 000000 |
1 1/2" Wide Dovetail | ||||||||||
| 4" | 4" | 4" | 1/8" | 60° | 1 | 15/32" | 9/32" | -320° to 300° | 0000000 | 000000 |
| 6 3/4" | 6 3/4" | 6 3/4" | 1/8" | 60° | 1 | 15/32" | 9/32" | -320° to 300° | 0000000 | 000000 |
2 1/4" Wide Dovetail | ||||||||||
| 7" | 7" | 5" | 3/16" | 60° | 2 | 11/16" | 5/16" | -320° to 300° | 0000000 | 000000 |
| 8" | 10" | 10" | 3/16" | 60° | 2 | 11/16" | 5/16" | -320° to 300° | 0000000 | 000000 |
V-Belts
