Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.

This thin lubricant penetrates into tight spaces, and nano-sized additives fill small surface imperfections, reducing wear and heat and extending the life of both the lubricant and equipment.

Formulated to handle high loads and temperatures, these multipurpose lubricants are NSF registered H1 for incidental food contact. Use them in high-pressure applications, such as gears, hinges, ovens, and dryers.

For use with roller chain and other moving metal parts, these thin lubricants cut through dirt, grease, and rust, withstand heavy loads, and resist wear.

Thick to cling to wet surfaces, these corrosion-resistant lubricants won’t wash off of chain or other moving metal parts in wet environments. They withstand heavy loads, cut through dirt, grease, and rust, and protect metal surfaces.

Protect chain and other moving metal parts found in food-processing and preparation equipment while limiting environmental impact. These lubricants are NSF registered H1 for incidental food contact and break down quickly in water.

Use these lubricants to ensure smooth, consistent motion when pulling wire or cable through conduit. They provide long-lasting lubrication to support repositioning and maintenance after initial cable installation. Compatible with all cable and insulation types.

Protect wire rope and cable from corrosion in wet environments. These lubricants have fast-penetrating solvents that quickly reach the core of wire rope and cable to remove water and protect against corrosion.

A high load-carrying capacity makes these lubricants good for use on chain and moving metal parts. They dry to form a film that lubricates without attracting dust.

Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. These lubricants dry to form a nonstick film that won’t attract dust. They are often used on hinges, gears, and roller chain.

Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise. PTFE provides excellent lubricity, while silicone repels water for use outdoors. Once dry, these lubricants form a thin lubricating layer that won’t rub off or attract dust.

This grease remains stable and in place under high pressure, heavy loads, and shock loads. It's often used for demanding mining, construction, and automotive applications.

Protect equipment while limiting environmental impact. This grease breaks down quickly in water.

Waterproof and heat-resistant, this grease can be autoclaved without washing out of equipment. It's chemically inert, so it won't interact with process fluids.

Nano-sized additives penetrate small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. It's formulated to adhere to metal parts and to stay in place in wet environments.

For use in applications where acids, bases, oxidizers, and fuels are present.

For use in food-processing and preparation areas, this petroleum jelly is NSF registered H1 for incidental food contact.

This grease remains stable and in place under high pressure, heavy loads, and shock loads. It is NSF registered H1 and FDA compliant for incidental food contact. It's often used to lubricate heavy-duty food production equipment.

Tackier than gear box grease, this grease sticks to open gears and roller chain.

For use in food-processing and preparation areas, this grease is NSF registered H1 or meets FDA 21 CFR 178.3570 for incidental contact with food. It's tacky to stick to open gears and roller chain.

Thin enough to penetrate inside chain pins and links, yet tacky so it stays in place, use this oil to lubricate chain and roller chain.

This oil withstands the heavy loads found in gears and gear-drive systems. Use it in food-processing and preparation areas where incidental contact with food is possible.

Use at pressures up to 50,000 psi.

Made of 98% moly, this lubricant withstands pressure up to 500,000 psi and has excellent wear resistance. Apply it to metal surfaces to prevent parts from corroding or sticking.