Thin enough to penetrate inside chain pins and links, yet tacky so it stays in place, use this oil to lubricate chain and roller chain.

This oil withstands the heavy loads found in gears and gear-drive systems. Use it in food-processing and preparation areas where incidental contact with food is possible.

Resistant to oxidation and heat, use this oil to lubricate a variety of machine tools and equipment. It's also known as turbine oil.

Use at pressures up to 50,000 psi.

Wear-resistant properties keep hydraulic pumps and equipment working, even in high-pressure systems.

Use this oil where zinc compatibility or environmental issues are a concern.

Use this oil in machines that require the same lubricant for both their hydraulic and way systems. Antiwear and oxidation-resistant additives make it work well with hydraulic systems, while moly gives it the high load-carrying ability required by way systems.

For use in food-processing and preparation areas, this oil is NSF registered H1 or meets FDA 21 CFR 178.3570 for incidental food contact.

Also known as spindle oil, this thin oil penetrates tight spaces and forms a light film to lubricate angular bearings used in machine tools and other high-speed applications.

With better heat and oxidation resistance than mineral oil, synthetic oil lasts longer, reducing the frequency of changes.

Keep air-powered tools running longer. This oil prevents corrosion and has wear-resistant and extreme-pressure properties. It absorbs water to reduce condensation and prevent buildup.

Reduce wear on rings, cylinders, and other moving parts in most major manufacturers' air compressors.

Designed to flow well at extremely low temperatures, use this oil with ammonia refrigeration compressors. It won't mix with refrigerant.

For long-lasting lubrication in vacuum pumps, this oil is slow to evaporate.

These fluids meet Ford and General Motors (Dexron III) specifications for automatic transmission fluids. They can also be used as power steering fluid and compressor fluid.

This stabilizer contains nano-sized additives, which penetrate small surface imperfections to reduce wear and heat, extending the life of both the oil and the engine while improving performance.

Also known as flushing fluids, these additives provide wear resistance while flushing and cleaning hydraulic systems, gear boxes, compressors, and other equipment.

Protect and clean hydraulic, automatic transmission, and power steering systems—these treatments clear out sticky varnish and prolong system life.

For use in selective catalytic reduction (SCR) systems, this fluid reduces the air pollution from your diesel engine to help you comply with EPA guidelines.

This thin lubricant penetrates into tight spaces, and nano-sized additives fill small surface imperfections, reducing wear and heat and extending the life of both the lubricant and equipment.

For use in food-processing and preparation areas, these thin, multipurpose lubricants are NSF registered H1 or FDA compliant for incidental food contact.

Protect food-processing and preparation equipment while limiting environmental impact. These multipurpose lubricants are NSF registered H1 for incidental food contact and are rated to quickly break down in water.

Protect chain and other moving metal parts found in food-processing and preparation equipment while limiting environmental impact. These lubricants are NSF registered H1 for incidental food contact and break down quickly in water.

Thick to cling to wet surfaces, these corrosion-resistant lubricants won’t wash off of chain or other moving metal parts in wet environments. They withstand heavy loads, cut through dirt, grease, and rust, and protect metal surfaces.

By traveling along individual strands and penetrating to the core of wire rope and cable, these lubricants maximize coverage to prevent rust and reduce wear. They cut through dirt, grease, and rust to protect wire rope and cable.

Use these lubricants to ensure smooth, consistent motion when pulling wire or cable through conduit. They provide long-lasting lubrication to support repositioning and maintenance after initial cable installation. Compatible with all cable and insulation types.

Protect electrical components—these lubricants insulate and block moisture, preventing electrical malfunctions. They cut through dirt, grease, and rust to clean connections and relays, leaving behind a thin film for long-lasting protection.

This grease remains stable and in place under high pressure, heavy loads, and shock loads. It's often used for demanding mining, construction, and automotive applications.

Protect equipment while limiting environmental impact. This grease breaks down quickly in water.

Nano-sized additives penetrate small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. It's formulated to adhere to metal parts and to stay in place in wet environments.

Protect equipment while having a limited impact on the environment. This grease resists moisture but still breaks down quickly in water.

Brush on most metal surfaces to provide a layer of protection against corrosion.

For use in applications where acids, bases, oxidizers, and fuels are present.

This grease remains stable and in place under high pressure, heavy loads, and shock loads. It is NSF registered H1 and FDA compliant for incidental food contact. It's often used to lubricate heavy-duty food production equipment.

This grease comes in cartridges that only work with our Controlled-Use Food-Grade Lever-Grip Grease Guns to make sure that the right grease is used in food-processing areas. It is NSF registered H1 for incidental food contact.

A firm consistency and resistance to evaporation make this grease ideal for vacuum applications, such as flow meters, vacuum and pressure systems, and laboratory equipment.

This thin grease goes on as a film to form a seal in glass and metal stop cocks.

This grease meets NSF/ANSI Standard 51 and FDA 21 CFR 175.300 for direct contact with food and NSF/ANSI Standard 61 for use with components that come into contact with drinking water.

This grease performs well in a wide range of bearing types.

Able to handle light to moderate loads at high speeds, this grease is often used on electric motor bearings for fans, pumps, and dryers.

Lubricate ball and roller bearings for high-load applications in wet environments, such as water processing, steel mills, and mining.

Use this grease in food-processing and preparation areas. It is NSF registered H1 or meets FDA Compliant 21 CFR 178.3570 for incidental contact with food.

Made with moisture-resistant thickener, this grease resists washing off and reduces corrosion and oxidation in wet environments.

Tackier than gear box grease, this grease sticks to open gears and roller chain.

For use in food-processing and preparation areas, this grease is NSF registered H1 or meets FDA 21 CFR 178.3570 for incidental contact with food. It's tacky to stick to open gears and roller chain.

Use this grease in areas where there is the possibility of contact with food. Also known as dielectric grease, it lubricates and protects electrical systems.

Lubricate, clean, deoxidize, and prevent corrosion on electrical contacts to improve their performance.

Specifically designed for use with air-powered impact wrenches, this grease withstands high pressure and heavy loads and prolongs tool life.

Lithium thickener allows this grease to withstand over 30% more pressure than our standard ball screw grease.

For use in high-pressure applications, this grease prevents wear and corrosion at loads up to 50,000 psi.

This grease stands up to the high speeds typically found in automated applications.

Highly pure, this grease won't contaminate sensitive environments, so it can be used in clean rooms.

Also known as plumber's lard oil, these light-colored lubricants are chlorine and sulfur free, so they won't stain soft metal, such as aluminum or copper. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier.

Reduce mess and waste with these easy-to-apply, nonstaining lubricants. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. All resist running and dripping.

Use these lubricants for easier and faster tapping, cutting, and threading of hard and thick material. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

These easy-to-apply stick lubricants won't drip or run for a cleaner workspace. Use them for tapping many types of metal, as well as plastic and rubber. Apply to taps to make cutting faster and easier, improve surface finishes, and extend tool life.

Spray these lubricants on saw blades and drill bits to make cutting easier and extend the life of your tool. They protect tools from sap, reducing cleaning time. Made without silicone or petroleum, they won’t stain wood or interfere with glue or finishes.

These electrical discharge machining (EDM) lubricants resist oxidation, so they last longer and extend the life of your electrode. They're clear for workpiece visibility.

Apply these lubricants to abrasive belts and wheels to extend their life and improve ground glass surface finishes. They lubricate the abrasive surface for faster and easier cutting cycles. They won’t stain metal, so they can be used as general purpose grinding fluids.

Designed for use with misting systems, these coolants have excellent cooling properties for intermittent machine cycles when milling and turning.

An alternative to nearly dry machining, apply these coolants to tools before milling and machining to reduce heat with minimal cleanup. They’re often used for shallow drilling, reaming, and tapping, as well as on saw blades.

For use with micro-drop dispensers, these coolants are mixed with air to create small, controlled droplets that dissipate heat and are easy to clean up. Use for small jobs.

Remove heat from long machining cycles with hard metal. These coolants prevent workpiece corrosion and distortion to improve cutting accuracy.

For general-purpose grinding, sanding, and finishing, these coolants prevent material from building up to ensure a high-quality finish and preserve tool life.

These coolants prevent material buildup on smoothing and sharpening stones. They are water-based, so they’re easy to clean from workpieces.

Weld longer without damaging your torch—replace the water in your welding cooler with these coolants to prevent mineral deposits and frozen lines. Coolants also tolerate colder temperatures than water. For use with MIG, TIG, spot, and stud welders. They are nonconductive.

Also known as thread lubricants, these general purpose antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Corrosion-resistant additives allow these lubricants to prevent parts from locking together in caustic environments, such as steel mills and power plants.

Prevent parts from locking or corroding together even when exposed to wet environments—these lubricants stay in place in the presence of water.

Copper allows these lubricants to conduct electricity, while graphite gives them good chemical and corrosion resistance. Use them to prevent threaded fasteners and close-fitting parts from locking together in connections where you need to conduct electricity.

Use these lubricants to prevent threaded fasteners and close-fitting parts in food-processing and preparation areas from locking together. They're NSF registered H1 for incidental food contact.

These lubricants dry to form a thin, solvent-resistant film that won't squeeze out or attract dirt. Use them to prevent threaded fasteners and close-fitting parts from locking together.

Use these lubricants to release large, intricate, or difficult-to-release parts. Also known as paintable mold-release lubricants, they don’t leave a residue, so you can paint or finish the molded part without the need to clean it. They allow you to easily remove cast parts and prevent sticking, stretching, and tearing.

Also known as paintable mold-release lubricants, these lubricants don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Use them for molding and casting parts in food-processing and preparation areas, or when molding parts that will be used around food. They allow you to easily remove cast parts and prevent sticking, stretching, and tearing.

Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour.

Also known as antifriction coatings, these slippery coatings cure to provide permanent lubrication. They're made with moly for high-load applications, such as hinges, gears, and rods. They fill in surface imperfections for a smooth, dry finish that won’t attract dust.

A high load-carrying capacity makes these lubricants good for use on chain and moving metal parts. They dry to form a film that lubricates without attracting dust.

Made of graphite in a thin oil, these lubricants penetrate wire rope and cable to the core. When the oil evaporates, it leaves behind a dry film of graphite that prevents wear and corrosion throughout the rope without attracting dust.

Coat tight-fitting metal parts with these lubricants before sliding them together to make assembly easier. Once assembled, they provide initial lubrication in equipment before oil has a chance to flow.

Made of graphite, these powders and flakes lubricate under heavy loads and high temperatures. They resist most chemicals and conduct heat and electricity. Use them dry or mix with oil and grease.