Length Length |
|---|
Head Type Head Type |
|---|
 | Tapped |
Material Material |
|---|
|
Shaft Type Shaft Type |
|---|
 | Plain |
End Shape End Shape |
|---|
 | Chamfered |
Pin Type Pin Type |
|---|
 | Dowel |
Minimum Hardness Minimum Hardness |
|---|
|
End Type End Type |
|---|
 | Plain |
Tolerance Rating Tolerance Rating |
|---|
|
Breaking Strength Breaking Strength |
|---|
|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Passivation Passivation |
|---|
|
Finish Finish |
|---|
|
Pull-Out Dowel Pins
One end of these pins is tapped, and the other is chamfered for easy insertion. To remove, thread a screw or tool into the tapped hole, then pull the pin out. Because they aren't vented, they work best in through holes. Use them as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts. Pins are precision ground for accurate alignment. Breaking strength is measured as double shear, which is the force required to break a pin into three pieces.
Pins that meet ASME B18.8.2 specifications conform to ASME standards for material and dimensions.
Metric pins meet DIN 7979D-m6 specifications.
Steel pins have good strength. Pins with a black-oxide finish resist rusting in dry environments.
18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
4140 Alloy Steel Pins
| Lg. | Dia. Tolerance | Thread Size | Min. Hardness | Breaking Strength, lbs. | Specifications Met | Each | |
1/4" Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 1/2" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 0000 |
| 1 3/4" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 8-32 | Rockwell C47 | 6,400 | ASME B18.8.2 | 000000000 | 0000 |
5/16" Dia. | |||||||
| 3/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 10,000 | ASME B18.8.2 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 10,000 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 10,000 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 10,000 | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 10,000 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 10,000 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 10,000 | ASME B18.8.2 | 000000000 | 0000 |
3/8" Dia. | |||||||
| 3/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 1 3/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
| 3" | 0.0001" to 0.0003" | 10-32 | Rockwell C47 | 14,300 | ASME B18.8.2 | 000000000 | 0000 |
7/16" Dia. | |||||||
| 1" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 19,500 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 19,500 | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 19,500 | ASME B18.8.2 | 000000000 | 0000 |
1/2" Dia. | |||||||
| 3/4" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 1 3/4" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 3" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 3 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
| 4" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 25,500 | ASME B18.8.2 | 000000000 | 0000 |
5/8" Dia. | |||||||
| 1 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 39,000 | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 39,000 | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 39,000 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 39,000 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 39,000 | ASME B18.8.2 | 000000000 | 0000 |
| 3" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 39,000 | ASME B18.8.2 | 000000000 | 0000 |
| 4" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C47 | 39,000 | ASME B18.8.2 | 000000000 | 0000 |
3/4" Dia. | |||||||
| 1 1/2" | 0.0001" to 0.0003" | 5/16"-18 | Rockwell C47 | 57,000 | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 5/16"-18 | Rockwell C47 | 57,000 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 5/16"-18 | Rockwell C47 | 57,000 | ASME B18.8.2 | 000000000 | 0000 |
| 3" | 0.0001" to 0.0003" | 5/16"-18 | Rockwell C47 | 57,000 | ASME B18.8.2 | 000000000 | 0000 |
| 4" | 0.0001" to 0.0003" | 5/16"-18 | Rockwell C47 | 57,000 | ASME B18.8.2 | 000000000 | 0000 |
1" Dia. | |||||||
| 2" | 0.0001" to 0.0003" | 5/16"-18 | Rockwell C47 | 102,000 | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 5/16"-18 | Rockwell C47 | 102,000 | ASME B18.8.2 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 5/16"-18 | Rockwell C47 | 102,000 | ASME B18.8.2 | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | 5/16"-18 | Rockwell C47 | 102,000 | ASME B18.8.2 | 000000000 | 00000 |
Black-Oxide Alloy Steel Pins
| Lg. | Dia. Tolerance | Thread Size | Min. Hardness | Breaking Strength | Specifications Met | Each | |
1/4" Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 1/2" | 0.0001" to 0.0003" | 8-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | 8-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | 8-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 8-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 8-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 8-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
5/16" Dia. | |||||||
| 3/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | 10-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 10-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 10-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
3/8" Dia. | |||||||
| 3/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | 10-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 10-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 10-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 10-32 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
1/2" Dia. | |||||||
| 1" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
5/8" Dia. | |||||||
| 2" | 0.0001" to 0.0003" | 1/4"-20 | Rockwell C60 | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
18-8 Stainless Steel Pins
| Lg. | Dia. Tolerance | Thread Size | Min. Hardness | Breaking Strength | Specifications Met | Each | |
3/16" Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 1/2" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 9/16" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 5/8" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 3/4" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 7/8" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/8" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 3/8" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 3/4" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
1/4" Dia. | |||||||
| 1/2" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 5/8" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 3/4" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 7/8" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/8" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 3/8" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 3/4" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/4" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 3" | 0.0001" to 0.0003" | 8-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
5/16" Dia. | |||||||
| 1/2" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 3/4" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 7/8" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
3/8" Dia. | |||||||
| 1/2" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 5/8" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 3/4" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 7/8" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 1 3/4" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/4" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 0000 |
| 3" | 0.0001" to 0.0003" | 10-32 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
7/16" Dia. | |||||||
| 1" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
1/2" Dia. | |||||||
| 3/4" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1 3/4" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 3 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
5/8" Dia. | |||||||
| 1 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/4" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | 1/4"-20 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
3/4" Dia. | |||||||
| 1 1/2" | 0.0001" to 0.0003" | 5/16"-18 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | 5/16"-18 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | 5/16"-18 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 5/16"-18 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | 5/16"-18 | Not Rated | Not Rated | ASME B18.8.2 | 000000000 | 00000 |
1" Dia. | |||||||
| 2" | 0.0001" to 0.0003" | 5/16"-18 | Not Rated | Not Rated | __ | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | 5/16"-18 | Not Rated | Not Rated | __ | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | 5/16"-18 | Not Rated | Not Rated | __ | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | 5/16"-18 | Not Rated | Not Rated | __ | 000000000 | 00000 |
Metric 1050-1095 Spring Steel Pins
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg., mm | Dia. Tolerance, mm | Size | Pitch, mm | Min. Hardness | Breaking Strength, lbs. | Specifications Met | Each | |
6 mm Dia. | ||||||||
| 16 | 0.004 to 0.012 | M4 | 0.7 | Rockwell C52 | 6,600 | DIN 7979D-m6 | 000000000 | 00000 |
| 18 | 0.004 to 0.012 | M4 | 0.7 | Rockwell C52 | 6,600 | DIN 7979D-m6 | 000000000 | 0000 |
| 20 | 0.004 to 0.012 | M4 | 0.7 | Rockwell C52 | 6,600 | DIN 7979D-m6 | 000000000 | 0000 |
| 24 | 0.004 to 0.012 | M4 | 0.7 | Rockwell C52 | 6,600 | DIN 7979D-m6 | 000000000 | 0000 |
| 28 | 0.004 to 0.012 | M4 | 0.7 | Rockwell C52 | 6,600 | DIN 7979D-m6 | 000000000 | 0000 |
| 30 | 0.004 to 0.012 | M4 | 0.7 | Rockwell C52 | 6,600 | DIN 7979D-m6 | 000000000 | 0000 |
| 32 | 0.004 to 0.012 | M4 | 0.7 | Rockwell C52 | 6,600 | DIN 7979D-m6 | 000000000 | 0000 |
| 36 | 0.004 to 0.012 | M4 | 0.7 | Rockwell C52 | 6,600 | DIN 7979D-m6 | 000000000 | 0000 |
| 40 | 0.004 to 0.012 | M4 | 0.7 | Rockwell C52 | 6,600 | DIN 7979D-m6 | 000000000 | 0000 |
| 50 | 0.004 to 0.012 | M4 | 0.7 | Rockwell C52 | 6,600 | DIN 7979D-m6 | 000000000 | 0000 |
| 60 | 0.004 to 0.012 | M4 | 0.7 | Rockwell C52 | 6,600 | DIN 7979D-m6 | 000000000 | 0000 |
8 mm Dia. | ||||||||
| 20 | 0.006 to 0.015 | M5 | 0.8 | Rockwell C52 | 10,400 | DIN 7979D-m6 | 000000000 | 0000 |
| 24 | 0.006 to 0.015 | M5 | 0.8 | Rockwell C52 | 10,400 | DIN 7979D-m6 | 000000000 | 0000 |
| 28 | 0.006 to 0.015 | M5 | 0.8 | Rockwell C52 | 10,400 | DIN 7979D-m6 | 000000000 | 0000 |
| 30 | 0.006 to 0.015 | M5 | 0.8 | Rockwell C52 | 10,400 | DIN 7979D-m6 | 000000000 | 0000 |
| 32 | 0.006 to 0.015 | M5 | 0.8 | Rockwell C52 | 10,400 | DIN 7979D-m6 | 000000000 | 0000 |
| 36 | 0.006 to 0.015 | M5 | 0.8 | Rockwell C52 | 10,400 | DIN 7979D-m6 | 000000000 | 0000 |
| 40 | 0.006 to 0.015 | M5 | 0.8 | Rockwell C52 | 10,400 | DIN 7979D-m6 | 000000000 | 0000 |
| 50 | 0.006 to 0.015 | M5 | 0.8 | Rockwell C52 | 10,400 | DIN 7979D-m6 | 000000000 | 0000 |
| 60 | 0.006 to 0.015 | M5 | 0.8 | Rockwell C52 | 10,400 | DIN 7979D-m6 | 000000000 | 0000 |
| 70 | 0.006 to 0.015 | M5 | 0.8 | Rockwell C52 | 10,400 | DIN 7979D-m6 | 000000000 | 0000 |
| 80 | 0.006 to 0.015 | M5 | 0.8 | Rockwell C52 | 10,400 | DIN 7979D-m6 | 000000000 | 0000 |
10 mm Dia. | ||||||||
| 24 | 0.006 to 0.015 | M6 | 1 | Rockwell C52 | Not Rated | DIN 7979D-m6 | 000000000 | 0000 |
| 28 | 0.006 to 0.015 | M6 | 1 | Rockwell C52 | Not Rated | DIN 7979D-m6 | 000000000 | 0000 |
| 30 | 0.006 to 0.015 | M6 | 1 | Rockwell C52 | Not Rated | DIN 7979D-m6 | 000000000 | 0000 |
| 32 | 0.006 to 0.015 | M6 | 1 | Rockwell C52 | Not Rated | DIN 7979D-m6 | 000000000 | 0000 |
| 36 | 0.006 to 0.015 | M6 | 1 | Rockwell C52 | Not Rated | DIN 7979D-m6 | 000000000 | 0000 |
| 40 | 0.006 to 0.015 | M6 | 1 | Rockwell C52 | Not Rated | DIN 7979D-m6 | 000000000 | 0000 |
| 50 | 0.006 to 0.015 | M6 | 1 | Rockwell C52 | Not Rated | DIN 7979D-m6 | 000000000 | 0000 |
| 60 | 0.006 to 0.015 | M6 | 1 | Rockwell C52 | Not Rated | DIN 7979D-m6 | 000000000 | 0000 |
| 70 | 0.006 to 0.015 | M6 | 1 | Rockwell C52 | Not Rated | DIN 7979D-m6 | 000000000 | 0000 |
| 80 | 0.006 to 0.015 | M6 | 1 | Rockwell C52 | Not Rated | DIN 7979D-m6 | 000000000 | 0000 |
12 mm Dia. | ||||||||
| 24 | 0.007 to 0.018 | M6 | 1 | Rockwell C52 | 24,000 | DIN 7979D-m6 | 000000000 | 0000 |
| 30 | 0.007 to 0.018 | M6 | 1 | Rockwell C52 | 24,000 | DIN 7979D-m6 | 000000000 | 0000 |
| 36 | 0.007 to 0.018 | M6 | 1 | Rockwell C52 | 24,000 | DIN 7979D-m6 | 000000000 | 0000 |
| 45 | 0.007 to 0.018 | M6 | 1 | Rockwell C52 | 24,000 | DIN 7979D-m6 | 000000000 | 0000 |
| 50 | 0.007 to 0.018 | M6 | 1 | Rockwell C52 | 24,000 | DIN 7979D-m6 | 000000000 | 0000 |
| 60 | 0.007 to 0.018 | M6 | 1 | Rockwell C52 | 24,000 | DIN 7979D-m6 | 000000000 | 0000 |
Metric 52100 Alloy Steel Pins
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg., mm | Dia. Tolerance, mm | Size | Pitch, mm | Min. Hardness | Breaking Strength, lbs. | Specifications Met | Each | |
16 mm Dia. | ||||||||
| 32 | 0.007 to 0.018 | M8 | 1.25 | Rockwell C52 | 33,500 | DIN 7979D-m6 | 000000000 | 00000 |
| 36 | 0.007 to 0.018 | M8 | 1.25 | Rockwell C52 | 33,500 | DIN 7979D-m6 | 000000000 | 0000 |
| 40 | 0.007 to 0.018 | M8 | 1.25 | Rockwell C52 | 33,500 | DIN 7979D-m6 | 000000000 | 0000 |
| 50 | 0.007 to 0.018 | M8 | 1.25 | Rockwell C52 | 33,500 | DIN 7979D-m6 | 000000000 | 0000 |
| 60 | 0.007 to 0.018 | M8 | 1.25 | Rockwell C52 | 33,500 | DIN 7979D-m6 | 000000000 | 0000 |
| 70 | 0.007 to 0.018 | M8 | 1.25 | Rockwell C52 | 33,500 | DIN 7979D-m6 | 000000000 | 0000 |
20 mm Dia. | ||||||||
| 50 | 0.008 to 0.021 | M10 | 1.5 | Rockwell C52 | 51,500 | DIN 7979D-m6 | 000000000 | 0000 |
| 60 | 0.008 to 0.021 | M10 | 1.5 | Rockwell C52 | 51,500 | DIN 7979D-m6 | 000000000 | 00000 |
| 80 | 0.008 to 0.021 | M10 | 1.5 | Rockwell C52 | 51,500 | DIN 7979D-m6 | 000000000 | 00000 |
Optional Insertion and Removal Tools
Use with internally threaded dowel pins. A complete tool requires a puller handle and a tip that fits your pin. You’ll also need a socket head cap screw that can thread into the pin. To use, thread a tip into the puller handle and fit the other end of the tip over the screw. Slide the weight along the handle to push or pull.