Drain Valves
Also known as stop cocks, install these valves on your tank for easy draining of air or fluid.
Inline handles can be operated from any position. The handle surrounds the drain outlet, so liquids may splash onto your hands or the handle. Side handles are out of the way of the flow, so your hand and the handle stay dry.
Valves with an external seal are for higher flow applications than valves with an internal seal. They also have a longer valve stem, so they’re less likely to introduce contaminants from exposed threads. Valves with an internal seal have shorter stems than those with external seals, so they fit shorter clearances. However, they’re more likely to introduce contaminants to the tank from debris collected on the exposed threads.
Valves with a brass body won’t corrode when venting air or draining water—even in wet or humid environments.
Brass handles won’t corrode.

Valves with a thumb-screw handle open by rolling the slip-resistant thumb screw between your fingers. Since these valves don’t have a wide handle, they fit in tighter spaces than valves with other handle styles.
Inlet | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Type | Gender | Outlet Connection Type | Handle Material | Body Material | For Use With | Max. Pressure | Temp. Range, °F | Ht. | Each | |
Straight—External Seal | |||||||||||
1/8 | NPT | Male | Unthreaded Hole | Brass | Brass | Air, Water, Inert Gas | 100 psi @ 250° F | -65° to 250° | 3/4" | 0000000 | 00000 |

Inlet | Outlet | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Type | Gender | Connection Type | Handle Material | Body Material | For Use With | Max. Pressure | Temp. Range, °F | Ht. | Each | |
Straight—External Seal | |||||||||||
1/8 | NPT | Male | Unthreaded Hole | Steel | Brass | Air, Water, Oil, Inert Gas | 150 psi @ 250° F | -65° to 250° | 7/8" | 0000000 | 00000 |

Valves with a wing-nut handle give you leverage to open tight, stubborn valves that have been sealed for long periods of time. The wings on these handles face outward, so they fit tanks without enough clearance around the drain hole to fit handles with inlet-facing wings.
A spout outlet smoothly pours any draining liquid into buckets without splashing.
Inlet | Outlet | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Type | Gender | Connection Type | Handle Material | Body Material | For Use With | Max. Pressure | Temp. Range, °F | Ht. | Each | |
Straight—External Seal | |||||||||||
1/4 | NPT | Male | Spout | Steel | Brass | Air, Water, Oil, Inert Gas | 150 psi @ 250° F | -65° to 250° | 1 1/2" | 0000000 | 00000 |
1/4 | NPT | Male | Unthreaded Hole | Steel | Brass | Air, Water, Oil, Inert Gas | 150 psi @ 250° F | -65° to 250° | 1" | 0000000 | 0000 |
3/8 | NPT | Male | Unthreaded Hole | Steel | Brass | Air, Water, Oil, Inert Gas | 150 psi @ 250° F | -65° to 250° | 1 1/4" | 0000000 | 0000 |

Valves with a wing-nut handle give you leverage to open tight, stubborn valves that have been sealed for long periods of time. The wings on these handles face inward, so they have a lower profile than outlet-facing wing nuts. A spout smoothly pours any draining liquid into buckets without splashing.
Inlet | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Type | Gender | Outlet Connection Type | Handle Material | Body Material | For Use With | Max. Pressure | Temp. Range, °F | Port-to-Port Lg. | Each | |
90° Elbow—External Seal | |||||||||||
1/4 | NPT | Male | Spout | Steel | Brass | Air, Water, Oil, Inert Gas | 150 psi @ 250° F | -65° to 250° | 11/16" | 0000000 | 00000 |

Valves with a T-handle have two flat arms that provide more leverage and torque than thumb-screw handles and are more comfortable to grip than wing-nut handles. They have a removable handle, which can be disassembled for cleaning.
Inlet | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Type | Gender | Outlet Connection Type | Handle Material | Body Material | For Use With | Features | Max. Pressure | Temp. Range, °F | Ht. | Each | |
Straight—Internal Seal | ||||||||||||
1/8 | NPT | Male | Unthreaded Hole | Brass | Brass | Water, Oil, Inert Gas | Removable Handle | 150 psi @ 250° F | -65° to 250° | 1 9/16" | 000000 | 000000 |
1/4 | NPT | Male | Unthreaded Hole | Brass | Brass | Water, Oil, Inert Gas | Removable Handle | 150 psi @ 250° F | -65° to 250° | 1 11/16" | 000000 | 00000 |
3/8 | NPT | Male | Unthreaded Hole | Brass | Brass | Water, Oil, Inert Gas | Removable Handle | 150 psi @ 250° F | -65° to 250° | 1 13/16" | 000000 | 00000 |
Float Valves for Draining Condensate

Body With
Drain Plug

Body With Drain
Plug And Top Vent
Automatically remove condensate from compressed air or inert gas lines—these float valves have a float-operated drain control. Install them as a condensate trap after the separator in your system.
Inlet | Outlet | Drain | Overall | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Capacity | Max. Pressure, psi | Ht. | Wd. | Specifications Met | Valve Body Material | Seal Material | Temp. Range, °F | Each | |
Cast Iron Housing | ||||||||||||||||||
Straight Valve Body with Drain Plug | ||||||||||||||||||
3/4 | NPT | Female | 3/4 | NPT | Female | 3/8 | NPT | Female | 1,750 lbs./hr. @ 70° F | 250 | 5 1/4" | 6 3/4" | ASTM Class 30 | 303 Stainless Steel | Buna-N Rubber | 35° to 450° | 000000 | 0000000 |
Straight Valve Body with Drain Plug and Top Vent | ||||||||||||||||||
1/2 | NPT | Female | 1/2 | NPT | Female | 1/4 | NPT | Female | 600 lbs./hr. @ 70° F | 250 | 6 11/16" | 5 5/8" | ASTM Class 30 | 420 Stainless Steel | Carbon Steel | 35° to 450° | 000000 | 000000 |
3/4 | NPT | Female | 3/4 | NPT | Female | 1/4 | NPT | Female | 600 lbs./hr. @ 70° F | 250 | 6 11/16" | 5 5/8" | ASTM Class 30 | 420 Stainless Steel | Carbon Steel | 35° to 450° | 000000 | 000000 |