Search Results
For Drill Bit System of Measurement For Drill Bit Systemof Measurement |
|---|
|
|
For Drill Bit Length Class For Drill Bit Length Class |
|---|
|
Organizer Type Organizer Type |
|---|
|
For Drill Bit Size For Drill Bit Size |
|---|
Overall Length Overall Length |
|---|
|
|
|
Overall Height Overall Height |
|---|
|
|
|
Mounting Location Mounting Location |
|---|
|
Inside Width Inside Width |
|---|
|
|
|
Closure Style Closure Style |
|---|
|
Inside Height Inside Height |
|---|
|
|
|
End Cap Material End Cap Material |
|---|
|
Drill Bit Cases
Store and organize drill bits so they stay in good working condition and don't go missing. These cases have individually marked holes for each size in your set.
Steel cases have stands that fold in and out. Stand them up when you need them, then fold them back into the slim case for storage inside a workbench drawer.
Plastic cases have screw-on lids to block out moisture. Compared to steel cases, they're lighter, and they resist rust and dents. Clip them onto your belt to take with you on the job.
Steel Cases
Steel
For Drill Bit | Overall | |||||
|---|---|---|---|---|---|---|
| No. of | Size | Lg. | Wd. | Ht. | Each | |
For Inch Drill Bits | ||||||
For Jobbers' Length Class | ||||||
| 13 | 1/16"-1/4" (increments of 1/64") | 5 3/8" | 4" | 3/8" | 0000000 | 00000 |
| 15 | 1/16"-1/2" (increments of 1/32") | 7" | 4" | 1 1/4" | 0000000 | 0000 |
| 16 | 1/64"-1/4" (increments of 1/64") | 5 3/8" | 4" | 3/8" | 0000000 | 00000 |
| 21 | 1/16"-3/8" (increments of 1/64") | 6" | 4" | 1 1/8" | 0000000 | 0000 |
| 29 | 1/16"-1/2" (increments of 1/64") | 7" | 4" | 1 3/4" | 0000000 | 0000 |
For Short Length Class | ||||||
| 29 | 1/16"-1/2" (increments of 1/64") | 7" | 4" | 1 3/4" | 0000000 | 00000 |
For Extended Length Class—8" Max. Lg. | ||||||
| 29 | 1/16"-1/2" (increments of 1/64") | 8 3/4" | 4" | 1 3/4" | 0000000 | 00000 |
For Reduced Shank Length Class—1/2" Shank Size | ||||||
| 8 | 9/16"-1" (increments of 1/16") | 8 1/2" | 6 1/4" | 2" | 0000000 | 00000 |
For Wire Gauge Drill Bits | ||||||
For Jobbers' Length Class | ||||||
| 20 | 80-61 ga | 2" | 1 1/2" | 1/4" | 0000000 | 0000 |
| 60 | 60-1 ga | 4 1/2" | 3 1/4" | 1" | 0000000 | 0000 |
| 80 | 80-1 ga | 4 1/2" | 3 1/4" | 1" | 0000000 | 00000 |
For Short Length Class | ||||||
| 60 | 60-1 ga | 4 1/2" | 3 1/4" | 1" | 0000000 | 00000 |
For Letter Drill Bits | ||||||
For Jobbers' Length Class | ||||||
| 26 | A-Z | 7" | 4" | 1 3/4" | 0000000 | 0000 |
For Short Length Class | ||||||
| 26 | A-Z | 7" | 4" | 1 3/4" | 0000000 | 00000 |
For Metric Drill Bits | ||||||
For Jobbers' Length Class | ||||||
| 13 | 1.0-7.0 mm (increments of 0.5 mm) | 5 1/2" | 4" | 1/2" | 0000000 | 0000 |
| 19 | 1.0-10.0 mm (increments of 0.5 mm) | 6" | 4" | 1 1/8" | 0000000 | 0000 |
| 25 | 1.0-13.0 mm (increments of 0.5 mm) | 7" | 4" | 1 3/4" | 0000000 | 0000 |
| 41 | 6.0-10.0 mm (increments of 0.1 mm) | 7 1/8" | 4 1/2" | 2 1/2" | 0000000 | 00000 |
| 50 | 1.0-5.9 mm (increments of 0.1 mm) | 4 1/2" | 3 1/4" | 1" | 0000000 | 00000 |
For Inch, Wire Gauge, Letter Drill Bits | ||||||
For Jobbers' Length Class | ||||||
| 19 | 1/16", 1/2", 1/4", 1/8", 21 ga, 25 ga, 27/64", 29 ga, 3/16", 3/32", 3/8", 5/16", 5/32", 5/64", 7 ga, 7/16", 7/32", F, U | 7" | 4" | 1 1/4" | 0000000 | 0000 |
| 115 | 1/16"-1/2" (increments of 1/64"), 60-1 ga, A-Z | 13 1/2" | 4 5/8" | 2 1/4" | 0000000 | 00000 |
| 135 | 1/16"-1/2" (increments of 1/64"), 80-1 ga, A-Z | 13 1/2" | 4 5/8" | 2 1/4" | 0000000 | 00000 |
For Short Length Class | ||||||
| 115 | 1/16"-1/2" (increments of 1/64"), 60-1 ga, A-Z | 4 5/8" | 13 1/2" | 2 1/4" | 0000000 | 00000 |
For Inch, Wire Gauge, Metric Drill Bits | ||||||
For Jobbers' Length Class | ||||||
| 134 | 1.0-13.0 mm (increments of 0.5 mm), 1/16"-1/2" (increments of 1/64"), 80-1 ga | 13 1/2" | 4 5/8" | 2 1/4" | 0000000 | 00000 |
Drill Bit Drawer Cabinets
Store multiple bits of each size. These cabinets have drawers marked with the sizes and decimal equivalents. They can be stacked up to three high.
Number of | For Drill Bit | Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Compartments | Drawers | Size | Lg. Class | Lg. | Wd. | Ht. | Includes | Material | Features | Each | |
For Inch Drill Bits | |||||||||||
| 29 | 3 | 1/16"-1/2" (increments of 1/64") | Jobbers' Length | 14 5/8" | 7 3/8" | 7 3/4" | __ | Steel | __ | 000000 | 000000 |
For Wire Gauge Drill Bits | |||||||||||
| 60 | 5 | 60-1 ga | Jobbers' Length | 14 5/8" | 7 3/8" | 7 3/4" | __ | Steel | __ | 000000 | 000000 |
| 84 | 5 | 80-1 ga | Jobbers' Length | 14 5/8" | 7 3/8" | 7 3/4" | __ | Steel | __ | 000000 | 000000 |
For Letter Drill Bits | |||||||||||
| 28 | 3 | A-Z | Jobbers' Length | 14 5/8" | 7 3/8" | 7 3/4" | __ | Steel | __ | 000000 | 00000 |
For Metric Drill Bits | |||||||||||
| 29 | 3 | 1.0-13.0 mm (increments of 0.5 mm) | Jobbers' Length | 14 5/8" | 7 3/8" | 7 3/4" | __ | Steel | __ | 000000 | 00000 |
| 60 | 5 | 1.0-6.9 mm (increments of 0.1 mm) | Jobbers' Length | 14 5/8" | 7 3/8" | 7 3/4" | __ | Steel | __ | 000000 | 000000 |
| 138 | 4 | 0.35-2.5 mm (increments of 0.05 mm) 2.6-10.0 mm (increments of 0.1 mm) 10.2 mm 10.5 mm 10.8 mm 11.0 mm 11.2 mm 11.5 mm 11.8 mm 12.0 mm 12.2 mm 12.5 mm 13.0 mm | Jobbers' Length, Short Length | 26" | 12" | 12 1/2" | Two Keys | Steel | Built-In Lock, Undivided bottom drawer for general storage | 0000000 | 000000 |
For Inch, Wire Gauge, Letter Drill Bits | |||||||||||
| 159 | 4 | 1/16"-1/2" (increments of 1/64") 60-1 ga A-Z | Jobbers' Length | 26" | 12" | 12 1/2" | Two Keys | Steel | Built-In Lock, Undivided bottom drawer for general storage | 0000000 | 000000 |
Compartmented Under-Mount Drill Bit Drawer Cabinets
Mount this cabinet underneath a workbench or shelf and store multiple drill bits of each size. The compartments are marked with the bit size and decimal equivalent.
No. of | Overall | Mount. Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Compartments | Drawers | For Drill Bit Size | For Drill Bit Lg. Class | Lg. | Wd. | Ht. | Material | Features | Includes | No. of | Dia. | Mounting Fasteners Included | Each | |
For Inch Drill Bits | ||||||||||||||
| 42 | 1 | 1/16"-1/2" (increments of 1/64") | Jobbers' Length, Short Length | 24 1/4" | 12 1/2" | 4 1/2" | Steel | Built-In Lock | Two Keys | 4 | 1/4" | No | 0000000 | 0000000 |
Under-Mount Drill Bit Drawer Cabinets
Mount this cabinet underneath a workbench or shelf and store your drill bits in the undivided drawer.
Number of | Overall | Mounting Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Compartments | Drawers | For Drill Bit Lg. Class | Lg. | Wd. | Ht. | Material | Features | Includes | No. of | Dia. | Mounting Fasteners Included | Each | |
For Inch, Wire Gauge, Letter, Metric Drill Bits | |||||||||||||
| 1 | 1 | Jobbers' Length, Short Length | 24 1/4" | 12 1/2" | 4 1/2" | Steel | Built-In Lock | Two Keys | 4 | 1/4" | No | 0000000 | 0000000 |
Reduced-Shank Drill Bit Drawer Cabinets
Store two bits of each size. These cabinets have drawers marked with the bit sizes. They can be stacked up to three high.
Number of | For Drill Bit | Overall | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Compartments | Drawers | Size | Shank Size | Lg. | Wd. | Ht. | Material | Each | |
For Inch Drill Bits | |||||||||
| 23 | 3 | 1", 1 1/32", 1 1/16", 1 1/8", 1 5/32", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", and 1 1/2" | 1/2" | 14 5/8" | 7 3/8" | 7 3/4" | Steel | 0000000 | 0000000 |
| 60 | 5 | 33/64"-63/64" (increments of 1/64") | 1/2" | 14 5/8" | 7 3/8" | 7 3/4" | Steel | 0000000 | 000000 |
Drill Bit Stands
These stands hold one of each bit size. Each hole is marked with the size.
For Drill Bit | Overall | |||||||
|---|---|---|---|---|---|---|---|---|
| No. of | Size | Lg. Class | Lg. | Wd. | Ht. | Material | Each | |
For Inch Drill Bits | ||||||||
| 29 | 1/16"-1/2" (increments of 1/64") | Jobbers' Length, Short Length, Extended Length | 5 5/8" | 2 5/8" | 1 1/2" | Steel | 0000000 | 00000 |
| 33 | 1/2"-1" (increments of 1/64") | Jobbers' Length, Short Length, Extended Length | 13" | 5" | 2 3/4" | Steel | 0000000 | 00000 |
For Letter Drill Bits | ||||||||
| 26 | A-Z | Jobbers' Length, Short Length, Extended Length | 5 5/8" | 2 5/8" | 1 1/2" | Steel | 0000000 | 0000 |
Reduced-Shank Drill Bit Stands
Each hole is sized to hold the 1/2" shank of a reduced-shank drill bit and marked with a bit size.
For Drill Bit | Overall | |||||||
|---|---|---|---|---|---|---|---|---|
| No. of | Size | Shank Size | Lg. | Wd. | Ht. | Material | Each | |
For Inch Drill Bits | ||||||||
| 33 | 1/2"-1" (increments of 1/64") | 1/2" | 13" | 5" | 2 3/4" | Steel | 0000000 | 000000 |
Magnetic Pouches for Drills
This pouch fits onto most hand-held power drills and impact drivers. It has a magnetic panel on the front that can hold bits and fasteners for easy access.
Pocket | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Ht. | Wd. | Ht. | Number of Compartments | Material | Color | Includes | Each | |
For Inch, Metric, Letter, Wire Gauge Drill Bits | |||||||||
| 4" | 3" | 3 3/4"-4" | 3 1/4"-3 1/2" | 1 | Nylon Fabric | Black | Hook-and-Loop Strap | 0000000 | 000000 |
Drill Bit Pouches
For 7 Drill Bits
For 15 Drill Bits
Attach these pouches to your belt to easily access drill bits while working.
For Drill Bit | Pocket | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of | Size | Lg. Class | Wd. | Ht. | Wd. | Ht. | Number of Compartments | Material | Closure Style | Color | Includes | Each | |
For Inch Drill Bits | |||||||||||||
| 7 | 1/16"-1/4" | Jobbers' Length | 3 1/4" | 4 3/4" | 1/2"-3/4" | 2 1/4"-2 3/4" | 7 | Canvas Fabric | Hook and Loop | Black | Plastic Clip | 000000 | 000000 |
| 7 | 1/8"-1/2" | Jobbers' Length | 3 3/4" | 6 1/2" | 3/4"-1" | 2 1/2"-2 3/4" | 7 | Canvas Fabric | Hook and Loop | Black | Plastic Clip | 000000 | 00000 |
| 15 | 1/16"-1/2" | Jobbers' Length | 5 1/4" | 7 1/4" | 1/2"-1 1/2" | 1 3/4"-5 1/2" | 15 | Canvas Fabric | Hook and Loop | Black | Plastic Clip | 000000 | 00000 |
Square Adjustable-Length Shipping Tubes
These tubes are easier to label and stack than round tubes. To adjust the length, push the ends of the tube together or pull them apart. Use them to protect long, thin objects during shipping.
Inside | ||||||
|---|---|---|---|---|---|---|
| Wd. | Ht. | Lg. | Thick. | Material | Each | |
Clear | ||||||
| 0.32" | 0.32" | 2"-3" | 0.04" | PVC Plastic | 00000000 | 00000 |
| 0.32" | 0.32" | 3"-5" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.32" | 0.32" | 5"-8" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.39" | 0.39" | 2"-3" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.39" | 0.39" | 3"-5" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.39" | 0.39" | 5"-8" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.39" | 0.39" | 8"-14" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.55" | 0.55" | 2"-3" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.55" | 0.55" | 3"-5" | 0.04" | PVC Plastic | 0000000 | 000 |
| 0.55" | 0.55" | 5"-8" | 0.04" | PVC Plastic | 0000000 | 0000 |
| 0.55" | 0.55" | 8"-14" | 0.04" | PVC Plastic | 0000000 | 0000 |
| 0.63" | 0.63" | 2"-3" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.63" | 0.63" | 3"-5" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.63" | 0.63" | 5"-8" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.63" | 0.63" | 8"-14" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.79" | 0.79" | 2"-3" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.79" | 0.79" | 3"-5" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.79" | 0.79" | 5"-8" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.79" | 0.79" | 8"-14" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.79" | 0.79" | 14"-24" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 0.87" | 0.87" | 2"-3" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.87" | 0.87" | 3"-5" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.87" | 0.87" | 5"-8" | 0.04" | PVC Plastic | 00000000 | 000 |
| 0.87" | 0.87" | 8"-14" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 0.95" | 0.95" | 8"-14" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 1" | 1" | 3"-5" | 0.04" | PVC Plastic | 0000000 | 0000 |
| 1" | 1" | 5"-8" | 0.04" | PVC Plastic | 0000000 | 0000 |
| 1" | 1" | 8"-14" | 0.04" | PVC Plastic | 0000000 | 0000 |
| 1.02" | 1.02" | 2"-3" | 0.04" | PVC Plastic | 00000000 | 000 |
| 1.02" | 1.02" | 14"-24" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 1.26" | 1.26" | 2"-3" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 1.26" | 1.26" | 3"-5" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 1.26" | 1.26" | 5"-8" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 1.26" | 1.26" | 8"-14" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 1.38" | 1.38" | 2"-3" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 1.38" | 1.38" | 3"-5" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 1.38" | 1.38" | 5"-8" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 1.38" | 1.38" | 8"-14" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 1.38" | 1.38" | 14"-24" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 1.77" | 1.77" | 2"-3" | 0.04" | PVC Plastic | 00000000 | 0000 |
| 1.77" | 1.77" | 3"-5" | 0.04" | PVC Plastic | 0000000 | 0000 |
| 1.77" | 1.77" | 5"-8" | 0.04" | PVC Plastic | 0000000 | 0000 |
| 1.77" | 1.77" | 8"-14" | 0.04" | PVC Plastic | 0000000 | 0000 |
| 1.77" | 1.77" | 14"-24" | 0.04" | PVC Plastic | 00000000 | 0000 |
Opaque White | ||||||
| 2.17" | 2.17" | 2"-3" | 0.04" | Polyethylene Plastic | 00000000 | 0000 |
| 2.17" | 2.17" | 3"-5" | 0.04" | Polyethylene Plastic | 0000000 | 0000 |
| 2.17" | 2.17" | 5"-8" | 0.04" | Polyethylene Plastic | 0000000 | 0000 |
| 2.17" | 2.17" | 8"-14" | 0.04" | Polyethylene Plastic | 0000000 | 0000 |
| 2.17" | 2.17" | 14"-24" | 0.04" | Polyethylene Plastic | 00000000 | 0000 |
| 2.56" | 2.56" | 3"-5" | 0.04" | Polyethylene Plastic | 00000000 | 0000 |
| 2.56" | 2.56" | 5"-8" | 0.04" | Polyethylene Plastic | 00000000 | 0000 |
| 2.56" | 2.56" | 8"-14" | 0.04" | Polyethylene Plastic | 00000000 | 0000 |
| 2.56" | 2.56" | 14"-24" | 0.04" | Polyethylene Plastic | 00000000 | 0000 |
| 3.07" | 3.07" | 3"-5" | 0.04" | Polyethylene Plastic | 00000000 | 0000 |
| 3.07" | 3.07" | 5"-8" | 0.04" | Polyethylene Plastic | 00000000 | 0000 |
| 3.07" | 3.07" | 9"-14" | 0.04" | Polyethylene Plastic | 00000000 | 0000 |
| 3.66" | 3.66" | 5"-8" | 0.04" | Polyethylene Plastic | 00000000 | 0000 |