Choose a Category
Clear All
System of Measurement System of Measurement |
|---|
|
For Use On For Use On | Show |
|---|
|
For Use On For Use On | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
Material Material |
|---|
|
Electrical Discharge Machining Tube Electrodes
With One Channel
With Two Channels
Create very small holes, including pilot holes to run EDM wire through. For use in hole-popping EDM machines.
Also known as spark machining, electrical discharge machining (EDM) uses electrical current to erode a metal workpiece to a desired shape.
Copper electrodes last longer and are better for use on extremely hard materials, such as carbide, sintered diamond, and invar and kovar nickel alloys.
Electrodes with one channel are best for creating through holes.
Electrodes with two channels are best for creating closed-end holes. The internal channels disintegrate material left at the bottom of a closed-end hole.
| Number of Channels | Dia., mm | Dia. Decimal Equivalent | Lg., mm | Tolerance | For Use On | Pkg. Qty. | Pkg. | |
Copper | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 | 0.5 | 0.02" | 400 | -0.0008" to 0.0000" | Carbide, Hardened Steel, Nickel, Sintered Diamond, Steel, Titanium, Tool Steel | 20 | 0000000 | 000000 |
| 1 | 1 | 0.039" | 400 | -0.0008" to 0.0000" | Carbide, Hardened Steel, Nickel, Sintered Diamond, Steel, Titanium, Tool Steel | 20 | 0000000 | 00000 |
| 2 | 0.5 | 0.02" | 300 | -0.0008" to 0.0000" | Carbide, Hardened Steel, Nickel, Sintered Diamond, Steel, Titanium, Tool Steel | 20 | 0000000 | 00000 |
| 2 | 1 | 0.039" | 400 | -0.0008" to 0.0000" | Carbide, Hardened Steel, Nickel, Sintered Diamond, Steel, Titanium, Tool Steel | 20 | 0000000 | 00000 |