2.7mm Shank Size Drill Bits

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type		Each
Jobbers' Length







				Black Oxide

				2.7	0.1063"	61	27.6	Round	2.7 mm	Standard	0000000	00000




						Titanium Nitride (TiN) Coated

						2.7	0.1063"	61	27.6	Round	2.7 mm	Standard	0000000	0000




								Gold Oxide

								2.7	0.1063"	64	36.9	Round	2.7 mm	Split	000000000	0000


								Short Length







												Black Oxide

												2.7	0.1063"	46	6.7	Round	2.7 mm	Standard	00000000	0000




														Titanium Nitride (TiN) Coated

														2.7	0.1063"	46	6.7	Round	2.7 mm	Split	0000000	0000

Cobalt Steel Drill Bits

Jobbers' Length

Round Shank

Split

Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

					Shank				Each
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type		1-11	12-Up
Jobbers' Length







				Gold Oxide

				2.7	0.1063"	61	27.6	Round	2.7 mm	Split	00000000	00000	00000

Chip-Clearing Cobalt Steel Drill Bits

Jobbers' Length

Parabolic Flute

Round Shank

Split

Avoid clogs and dissipate heat with cobalt bits that last at least twice as long as high-speed steel. The flutes clear chips to improve coolant flow and prevent damage to the bit and the hole. They also speed up drilling since you don't have to stop to clear the bit manually.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type		Each
Jobbers' Length







				Uncoated

				2.7	0.1063"	61	33	Parabolic	Round	2.7	Split	00000000	00000