McMaster-Carr logo
    Filter by
    System of Measurement
    Drill Bit Size
    Industrial Info Compare
    Attribute Image
    Shank Type
    Flute Direction
    Shank Size
    Attribute Image
    Decimal Size Equivalent
    Industrial Info Compare
    Sold As
    Number of Flutes
    Screw Size
    Industrial Info Compare
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    93 Products
    About Drill Bits
    industrial info icon

    Compare material, finish, length class, and decimal size equivalents.

    High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Jobbers' Length, Round Shank.
    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Short Length, Round Shank.

    Jobbers' Length

    Round Shank

    Short Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Maintenance Length, Round Shank.
    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Extended Length, Round Shank.

    Maintenance Length

    Round Shank

    Extended Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Our basic drill bits are also the most versatile. Cut holes in a variety of metals, from the softest aluminum to the hardest steel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Maintenance Length—Shorter than jobbers' length, these bits are more rigid for less wobble when drilling hard material. Also known as mechanics’ bits.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron and titanium.
    Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Each
    Package
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Pkg.
    Qty.
    Pkg.
    Jobbers' Length
     
    Black Oxide
    5/32"
    		0.1563"
    		3 1/8"1.76"Round
    		5/32"Split
    		0000000000000120000000000000
     
    Titanium Nitride (TiN) Coated
    5/32"
    		0.1563"
    		3 1/8"1.76"Round
    		5/32"Split
    		00000000000001200000000000000
     
    Titanium Aluminum Nitride (TiAlN) Coated
    5/32"
    		0.1563"
    		3 1/8"1.76"Round
    		5/32"Split
    		0000000000012000000000000
     
    Uncoated
    5/32"
    		0.1563"
    		3 1/8"1.76"Round
    		5/32"Standard
    		00000000000120000000000000
     
    Short Length
     
    Black Oxide
    5/32"
    		0.1563"
    		2 1/8"0.76"Round
    		5/32"Split
    		00000000000120000000000000
     
    Titanium Nitride (TiN) Coated
    5/32"
    		0.1563"
    		2 1/8"0.76"Round
    		5/32"Split
    		000000000006000000000000
     
    Uncoated
    5/32"
    		0.1563"
    		2 1/8"0.76"Round
    		5/32"Standard
    		000000000000120000000000000
     
    Maintenance Length
     
    Gold Oxide
    5/32"
    		0.1563"
    		2 3/4"1.69"Round
    		5/32"Split
    		0000000000000————0
     
    Extended Length
     
    Black Oxide
    5/32"
    		0.1563"
    		5 3/8"2.76"Round
    		5/32"Standard
    		0000000000000————0
     
    Titanium Nitride (TiN) Coated
    5/32"
    		0.1563"
    		5 3/8"3"Round
    		5/32"Standard
    		00000000000000————0
     
    Uncoated
    5/32"
    		0.1563"
    		8"5.68"Round
    		5/32"Standard
    		0000000000000————0
    5/32"
    		0.1563"
    		12"8.68"Round
    		5/32"Standard
    		000000000000————0
     

    Cobalt Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bits, Short Length, Round Shank.

    Short Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bits, Extended Length, Round Shank.

    Extended Length

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron, titanium, and fiberglass.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Each
    Package
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Pkg.
    Qty.
    Pkg.
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    5/32"
    		0.1563"
    		3 1/8"2"Round
    		5/32"Split
    		0000000000000012000000000000000
     
    Titanium Aluminum Nitride (TiAlN) Coated
    5/32"
    		0.1563"
    		3"1.46"Round
    		5/32"Split
    		0000000000000————0
     
    Uncoated
    5/32"
    		0.1563"
    		3 1/8"1.69"Round
    		5/32"Split
    		00000000000————0
     
    Short Length
     
    Titanium Nitride (TiN) Coated
    5/32"
    		0.1563"
    		2 1/16"0.76"Round
    		5/32"Split
    		00000000000————0
     
    Uncoated
    5/32"
    		0.1563"
    		2 1/8"0.76"Round
    		5/32"Split
    		0000000000001200000000000000
     
    Extended Length
     
    Uncoated
    5/32"
    		0.1563"
    		5 3/8"2.68"Round
    		5/32"Split
    		0000000000000————0
    5/32"
    		0.1563"
    		8"5.5"Round
    		5/32"Split
    		000000000000————0
     

    Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits, Jobbers' Length, Round Shank.
    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits, Short Length, Round Shank.

    Jobbers' Length

    Round Shank

    Short Length

    Round Shank

    The hardest and most wear-resistant drill bits you can buy. Carbide bits stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. They last 10 to 20 times longer than their closest alternative, cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.
    Titanium Aluminum Nitride (TiAlN) Coated—No drill bits last longer. These are the best for high-speed, high-temperature drilling of very hard and abrasive materials, including titanium and fiberglass.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit Point
    Type
    Each
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    5/32"
    		0.1563"
    		2 1/2"1.1"Round
    		5/32"Four Facet
    		00000000000000
     
    Titanium Aluminum Nitride (TiAlN) Coated
    5/32"
    		0.1563"
    		2 1/2"1.1"Round
    		5/32"Four Facet
    		000000000000
     
    Uncoated
    5/32"
    		0.1563"
    		2 1/2"1.1"Round
    		5/32"Four Facet
    		000000000000
     
    Short Length
     
    Titanium Aluminum Nitride (TiAlN) Coated
    5/32"
    		0.1563"
    		2 1/2"0.6"Round
    		5/32"Four Facet
    		000000000000
     

    Left-Hand Cobalt Steel Drill Bits

    Image of Product. Side1 orientation. Drill Bits. Left-Hand Cobalt Steel Drill Bits, Maintenance Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Maintenance Length

    Round Shank

    Split

    The flutes spiral in the opposite direction of other bits and stay sharp longer than high-speed steel. They’re primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits.
    Maintenance Length—Shorter than jobbers' length, these bits are more rigid for less wobble when drilling hard material. Also known as mechanics’ bits.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron, titanium, and fiberglass.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Each
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    1-11
    12-Up
    Maintenance Length
     
    Titanium Nitride (TiN) Coated
    5/32"
    		0.1563"
    		2 5/8"1.27"Round
    		5/32"Split
    		00000000000000000
     
    Titanium Aluminum Nitride (TiAlN) Coated
    5/32"
    		0.1563"
    		2 5/8"1.27"Round
    		5/32"Split
    		000000000000000
     
    Uncoated
    5/32"
    		0.1563"
    		2 5/8"1.27"Round
    		5/32"Split
    		000000000000000
     

    Carbide-Tipped Drill Bits for Masonry and Concrete

    Crush rather than cut material so bits don’t jam or overheat while drilling masonry and concrete. The ultra-hard carbide tip breaks masonry into pieces and the widely spaced flutes channel them out of the hole. These bits stay sharp, resisting wear and heat that will dull or break other bits.
    Round Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits for Masonry and Concrete, Round Shank for Hammer and Rotary Drilling.
    Use these bits in rotary hammers that have a drill chuck. Simultaneous rotary and hammering action drills faster and penetrates material with less pressure than rotary-only bits. Also known as percussion or impact bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Shank
    Size
    Specs. Met
    Each
    Uncoated
     
    Standard Point
    5/32"
    		0.1563"
    		3"1.38"5/32"ANSI B212.15000000000000
    5/32"
    		0.1563"
    		6"4"5/32"ANSI B212.1500000000000
    11/64"
    		0.1719"
    		3"1.38"5/32"ANSI B212.1500000000000
     
    Round Shank for Rotary Only Drilling
    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits for Masonry and Concrete, Round Shank for Rotary Only Drilling.
    Pair these bits with hand-held power drills and hammer drills set to rotary-only mode. Because bits rotate only, they require more pressure to grind up material than other bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Shank
    Size
    Specs. Met
    Each
    Uncoated
     
    Standard Point
    5/32"
    		0.1563"
    		3"1 5/8"5/32"ANSI B212.15000000000000
     

    Left-Hand High-Speed Steel Drill Bits

    Image of Product. Side1 orientation. Drill Bits. Left-Hand High-Speed Steel Drill Bits, Jobbers' Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Jobbers' Length

    Round Shank

    Split

    With flutes that spiral in the opposite direction of other bits, these are primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits. High-speed steel is the versatile choice for drilling most metals.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Gold Oxide
    5/32"
    		0.1563"
    		3 1/8"1.88"Round
    		5/32"Split
    		0000000000000
     
    Uncoated
    5/32"
    		0.1563"
    		3 1/8"1.68"Round
    		5/32"Split
    		000000000000
     

    Tapping Screw Installation Drill Bits for Masonry and Concrete

    Create an undersized hole so concrete tapping screws fit tightly once they're threaded into place. These bits are slightly smaller than the matching screw size. They have a carbide tip that resists wear and heat to stay sharp.
    Round Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Tapping Screw Installation Drill Bits for Masonry and Concrete, Round Shank for Hammer and Rotary Drilling.
    Use these bits in rotary hammers that have a drill chuck. Simultaneous rotary and hammering action drills faster and penetrates material with less pressure than rotary-only bits. Also known as percussion or impact bits.
    For Screw
    Size
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Shank
    Size
    Features
    Each
    Uncoated
     
    Standard Point
    3/16"
    		5/32"
    		0.1563"
    		3 1/2"2 1/2"5/32"Flat on Shank00000000000000
    3/16"
    		5/32"
    		0.1563"
    		4 1/2"3 1/2"5/32"Flat on Shank0000000000000
    3/16"
    		5/32"
    		0.1563"
    		5 1/2"4 1/2"5/32"Flat on Shank0000000000000
    1/4"
    		3/16"
    		0.1875"
    		3 1/2"2 1/2"5/32"Flat on Shank0000000000000
    1/4"
    		3/16"
    		0.1875"
    		4 1/2"3 1/2"5/32"Flat on Shank0000000000000
    1/4"
    		3/16"
    		0.1875"
    		5 1/2"4 1/2"5/32"Flat on Shank0000000000000
    1/4"
    		3/16"
    		0.1875"
    		6 1/2"5"5/32"Flat on Shank0000000000000
    1/4"
    		3/16"
    		0.1875"
    		7 1/2"6"5/32"Flat on Shank0000000000000
     

    Carbide-Tipped Drill Bits

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits, Short Length, Round Shank.

    Short Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits, Extended Length, Round Shank.

    Extended Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Standard

    Split

    Performance similar to solid carbide but at a lower price point. Like carbide bits, these are stronger than cobalt and high-speed steel and maintain their sharp edges when drilling abrasive material. However, when drilling tough metals like iron and hardened steel, upgrade to carbide for longer life.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Uncoated
    5/32"
    		0.1563"
    		3 1/8"1.6"Round
    		5/32"Standard
    		0000000000000
    5/32"
    		0.1563"
    		3 1/8"1.6"Round
    		5/32"Split
    		0000000000000
     
    Short Length
     
    Uncoated
    5/32"
    		0.1563"
    		2 1/8"0.45"Round
    		5/32"Standard
    		00000000000000
    5/32"
    		0.1563"
    		2 1/8"0.45"Round
    		5/32"Split
    		000000000000
     
    Extended Length
     
    Uncoated
    5/32"
    		0.1563"
    		5 3/8"2.61"Round
    		5/32"Standard
    		0000000000000
     

    Carbide-Tipped Drill Bits for Glass and Ceramic

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits for Glass and Ceramic, Spear Bit.

    Spear Bit

    The spear-shaped point grinds away glass and ceramic at a slow speed, reducing the chance of chipping and cracking. These bits are carbide-tipped steel, which is extremely hard and wear resistant to maintain a sharp edge cut after cut. Drilling requires a coolant, such as water.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Spear Bit
     
    Carbide Tipped/Uncoated
    3/16"
    		0.1875"
    		2 1/4"1"Round
    		5/32"Standard
    		00000000000
     

    Short-Flute High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Short-Flute High-Speed Steel Drill Bits, Extended Length, Round Shank.

    Extended Length

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    The rigidity of short-length bits without sacrificing reach. The shallow drilling depth makes these less likely to wobble than other bits of the same length, so they stay centered and drill straighter. High-speed steel is good for general purpose drilling in most metals.
    Extended Length—Drill through panels and thick workpieces with our longest bits.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Extended Length
     
    Black Oxide
    5/32"
    		0.1563"
    		6"1.8"Round
    		5/32"Split
    		000000000000
    5/32"
    		0.1563"
    		12"1.8"Round
    		5/32"Split
    		000000000000
     

    Chip-Clearing High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits, Jobbers' Length, High Helix Flute, Round Shank.
    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits, Jobbers' Length, Parabolic Flute, Round Shank.

    Jobbers' Length

    High Helix Flute

    Round Shank

    Jobbers' Length

    Parabolic Flute

    Round Shank

    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits, Extended Length, Parabolic Flute, Round Shank.

    Extended Length

    Parabolic Flute

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    With flutes that lift chips out of the hole, you don't have to stop drilling to clear these bits manually. They improve coolant flow to dissipate heat and prevent clogs that can damage the bit and ruin the hole. High-speed steel is good for general purpose drilling in most metals.
    High Helix Flute—Less aggressive than parabolic flutes for cleaner cuts in soft metals.
    Parabolic Flute—A U-shaped groove on the flutes cuts faster and clears chips more quickly than high-helix bits, so these are better for drilling deeper holes.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Black Oxide
    5/32"
    		0.1563"
    		3"1.37"High HelixRound
    		5/32"Split
    		0000000000000
    5/32"
    		0.1563"
    		3 1/8"1.68"ParabolicRound
    		5/32"Split
    		000000000000
     
    Titanium Nitride (TiN) Coated
    5/32"
    		0.1563"
    		3 1/8"1.68"ParabolicRound
    		5/32"Split
    		000000000000
     
    Uncoated
    5/32"
    		0.1563"
    		3 1/8"1.68"ParabolicRound
    		5/32"Split
    		00000000000
    5/32"
    		0.1563"
    		3 1/8"1.76"High HelixRound
    		5/32"Standard
    		000000000000
     
    Extended Length
     
    Uncoated
    5/32"
    		0.1563"
    		8"5.68"ParabolicRound
    		5/32"Split
    		0000000000000
    5/32"
    		0.1563"
    		12"8.68"ParabolicRound
    		5/32"Split
    		0000000000000
     

    High-Speed Steel Drill Bits for Wood Screws

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits for Wood Screws.
    Achieve a perfect fit for wood screws with bits that match their exact thread size and diameter. Wear and heat resistant, they're good for soft and hard woods.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    For Screw
    Size
    Overall
    Lg.
    Max. Drilling
    Dp.
    Shank
    Size
    Drill Bit
    Point Type
    Each
    Uncoated
     
    Round Shank
    5/32"
    		0.1563"
    		No. 7
    		3 1/8"2"5/32"Standard
    		000000000000
    5/32"
    		0.1563"
    		No. 7
    		5 3/8"3"5/32"Standard
    		0000000000000
     

    Short-Flute Cobalt Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Short-Flute Cobalt Steel Drill Bits, Jobbers' Length, Round Shank.
    Image of Product. Front orientation. Drill Bits. Short-Flute Cobalt Steel Drill Bits, Extended Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Jobbers' Length

    Round Shank

    Extended Length

    Round Shank

    Split

    These bits combine the toughness and wear resistance of cobalt with short flutes for rigidity. The shallow drilling depth makes them less likely to wobble than other bits of the same length, so they stay centered and drill straighter. Cobalt lasts at least twice as long as high-speed steel. It can also run up to 25% faster at higher temperatures without damaging the bit on hard materials such as nickel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Extended Length—Drill through panels and thick workpieces with our longest bits.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Black Oxide
    5/32"
    		0.1563"
    		3 1/8"0.77"Round
    		5/32"Split
    		0000000000000
     
    Extended Length
     
    Uncoated
    5/32"
    		0.1563"
    		6"1.68"Round
    		5/32"Split
    		00000000000
    5/32"
    		0.1563"
    		12"1.68"Round
    		5/32"Split
    		000000000000
     

    High-Speed Steel Drill Bits for Plastic

    The precision-ground, 60° point penetrates gradually to prevent cracking and chipping. It also reduces heat that can deform the material. Use these bits for drilling into acrylic, laminate, and other plastics. They're made of wear-resistant high-speed steel.
    Jobbers' LengthAbout Jobbers' Length
    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits for Plastic, Jobbers' Length.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Point
    Angle
    Drill Bit
    Point Type
    Each
    Uncoated
    5/32"
    		0.1563"
    		3 1/8"1.94"Round
    		5/32"60°Standard
    		0000000000000
     

    Carbide Drill Bits for Hardened Steel

    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits for Hardened Steel, Short Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Short Length

    Round Shank

    Split

    The hardest and most wear-resistant bits with the longest life. Straight flutes withstand the heavy pressure needed to penetrate hardened steel. These bits cut more aggressively and resist stress better than spiral-flute bits. Carbide stays sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. It can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit Point
    Type
    Each
    Short Length
     
    Titanium Nitride (TiN) Coated
    5/32"
    		0.1563"
    		2 1/2"0.6"Round
    		5/32"Split
    		0000000000000
     
    Uncoated
    5/32"
    		0.1563"
    		2 1/2"0.6"Round
    		5/32"Four Facet
    		000000000000
     

    Chip-Clearing Cobalt Steel Drill Bits for Nickel and Stainless Steel

    Image of Product. Front orientation. Drill Bits. Chip-Clearing Cobalt Steel Drill Bits for Nickel and Stainless Steel, Jobbers' Length, Parabolic Flute, Round Shank.

    Jobbers' Length

    Parabolic Flute

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Excellent for challenging metals such as stainless steel and nickel alloys, these bits cut aggressively and evacuate chips quickly. The grooved flutes prevent clogs and improve coolant flow to dissipate heat that can damage the bit or your material. Bits are made of tough and wear-resistant cobalt steel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron, titanium, and fiberglass.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Titanium Aluminum Nitride (TiAlN) Coated
    5/32"
    		0.1563"
    		3"1.69"ParabolicRound
    		5/32"Split
    		0000000000000
     

    Carbide Drill Bits for Sheet Metal

    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits for Sheet Metal, Short Length, Round Shank.

    Short Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    The hardest and most wear-resistant bits for sheet metal and thin-wall tubing. They have short flutes that make shallow cuts without snagging and deforming the material. Carbide stays sharp at high temperatures and faster speeds than high-speed steel. It can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    No. of Drilling
    Ends
    Each
    Short Length
     
    Uncoated
    5/32"
    		0.1563"
    		2"0.38"Round
    		5/32"Standard
    		10000000000000
     

    Short-Flute Carbide-Tipped Drill Bits

    Image of Product. Front orientation. Drill Bits. Short-Flute Carbide-Tipped Drill Bits, Extended Length, Round Shank.

    Extended Length

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Our strongest short-flute bits, these have a carbide tip that stays sharp when drilling abrasive materials, such as titanium. The shallow drilling depth makes them less likely to wobble than other bits of the same length, so they stay centered and drill straighter.
    Extended Length—Drill through panels and thick workpieces with our longest bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Extended Length
     
    Uncoated
    5/32"
    		0.1563"
    		6"2"Round
    		5/32"Split
    		0000000000000
    5/32"
    		0.1563"
    		12"1.61"Round
    		5/32"Split
    		000000000000
     

    Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite

    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite, Jobbers' Length.

    Jobbers' Length

    Cut clean holes in abrasive material without fraying or delaminating the surface. Made of carbide, these bits resist wear to retain a sharp edge, even after after hundreds of cuts.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Point
    Angle
    Drill Bit
    Point Type
    Bit
    Style
    Each
    Jobbers' Length
     
    Diamond Coated
    5/32"
    		0.1563"
    		2 1/2"1.1"Round
    		5/32"118°Split
    		Fluted0000000000000
     
    Uncoated
    5/32"
    		0.1563"
    		2 1/2"1.1"Round
    		5/32"140°Brad
    		Fluted000000000000
     

    Coolant-Fed Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Coolant-Fed Carbide Drill Bits, Jobbers' Length, Round Shank.
    Image of Product. Side1 orientation. Drill Bits. Coolant-Fed Carbide Drill Bits, Maintenance Length, Round Shank.

    Jobbers' Length

    Round Shank

    Maintenance Length

    Round Shank

    The hardest and most wear-resistant bits, these deliver coolant to reduce heat and evacuate chips. They are designed for CNC machines that supply coolant through the spindle rather than an external source, such as a hose and nozzle. Coolant flows directly from holes in the bit's tip onto the drilling surface. This speeds up cuts and leads to excellent performance in deep holes and tough materials such as stainless steel and titanium.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Maintenance Length—Shorter than jobbers' length, these bits are more rigid for less wobble when drilling hard material. Also known as mechanics’ bits.
    Titanium Aluminum Nitride (TiAlN) Coated—No drill bits last longer. These are the best for high-speed, high-temperature drilling of very hard and abrasive materials, including titanium and fiberglass.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit Point
    Type
    Each
    Jobbers' Length
     
    Titanium Aluminum Nitride (TiAlN) Coated
    5/32"
    		0.1563"
    		2 1/2"0.94"Round
    		5/32"Four Facet
    		00000000000000
     
    Maintenance Length
     
    Titanium Aluminum Nitride (TiAlN) Coated
    5/32"
    		0.1563"
    		2 3/16"0.81"Round
    		5/32"Four Facet
    		0000000000000
     

    High-Speed Steel Drill Bits for Sheet Metal

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits for Sheet Metal, Short Length, Round Shank, 1 Drilling End.

    Short Length

    Round Shank

    1 Drilling End

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits for Sheet Metal, Short Length, Round Shank, 2 Drilling Ends.

    Short Length

    Round Shank

    2 Drilling Ends

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Short flutes make shallow cuts through sheet metal and thin-wall tubing without snagging and deforming the material. High-speed steel bits are good for general purpose drilling in most metals.
    Short Length—The most rigid bits for drilling the straightest holes.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Shank
    Each
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    No. of Drilling
    Ends
    1-11
    12-Up
    Short Length
     
    Black Oxide
    5/32"
    		0.1563"
    		2"0.75"Round
    		5/32"Split
    		100000000000000000
    5/32"
    		0.1563"
    		2 1/8"0.56"Round
    		5/32"Split
    		2000000000000000
     

    Chip-Clearing High-Speed Steel Drill Bits for Aluminum, Brass, and Bronze

    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits for Aluminum, Brass, and Bronze, Jobbers' Length, Low Helix Flute, Round Shank.

    Jobbers' Length

    Low Helix Flute

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    Designed for soft metals that can gum up other drill bits, wide flutes lift chips out of the hole. This prevents clogs that can weaken and damage the bit and ruin the hole. Also known as slow spiral bits, these are made of versatile high-speed steel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Each
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    1-11
    12-Up
    Jobbers' Length
     
    Uncoated
    5/32"
    		0.1563"
    		3 1/8"1.68"Low HelixRound
    		5/32"Standard
    		000000000000000000
     

    Chip-Clearing Cobalt Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Chip-Clearing Cobalt Steel Drill Bits, Jobbers' Length, Parabolic Flute, Round Shank.

    Jobbers' Length

    Parabolic Flute

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Avoid clogs and dissipate heat with cobalt bits that last at least twice as long as high-speed steel. The flutes clear chips to improve coolant flow and prevent damage to the bit and the hole. They also speed up drilling since you don't have to stop to clear the bit manually.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    5/32"
    		0.1563"
    		2 7/8"1.6"ParabolicRound
    		5/32"Split
    		000000000000
     
    Uncoated
    5/32"
    		0.1563"
    		2 7/8"1.6"ParabolicRound
    		5/32"Split
    		0000000000000
     

    Smooth-Finish Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Smooth-Finish Carbide Drill Bits, Jobbers' Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Jobbers' Length

    Round Shank

    Split

    With more cutting edges than other drill bits, these cut continuously and consistently for a smoother finish. They also stay centered to produce holes that are straighter and more accurate. However, since there’s less space between the cutting edges, they don’t clear chips as quickly. Made of carbide, these are the hardest and most wear-resistant drill bits you can buy. They stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Uncoated
    5/32"
    		0.1563"
    		2 1/2"1.1"Round
    		5/32"Split
    		0000000000000
     

    Hole-Starting Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Hole-Starting Carbide Drill Bits, Short Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Short Length

    Round Shank

    Split

    Harder and more wear resistant than cobalt steel, these carbide bits create an accurate starting place in your workpiece. Cut an indent, then continue drilling with a longer bit. The indent prevents slipping so the final hole is centered and precise. Carbide stays sharp at high temperatures and faster speeds. It can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.
    Shank
    140° Point Angle
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Short Length
     
    Titanium Nitride (TiN) Coated
    5/32"
    		0.1563"
    		2 1/4"0.47"Round
    		5/32"Split
    		00000000000000
     

    Chip-Clearing Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Chip-Clearing Carbide Drill Bits, Jobbers' Length, Parabolic Flute, Round Shank.
    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Jobbers' Length

    Parabolic Flute

    Round Shank

    Standard

    The hardest and most wear-resistant bits, the flutes clear chips and improve coolant flow. They prevent clogs and dissipate heat that can damage the bit and the hole. Carbide bits stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. They last 10 to 20 times longer than cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    5/32"
    		0.1563"
    		3 5/32"1.81"ParabolicRound
    		5/32"Standard
    		0000000000000
     
    Uncoated
    5/32"
    		0.1563"
    		3 5/32"1.81"ParabolicRound
    		5/32"Standard
    		000000000000
     

    Carbide-Tipped Smooth-Finish Drill Bits for Wood

    Image of Product. Carbide-Tipped Steel. Front orientation. Drill Bits. Carbide-Tipped Smooth-Finish Drill Bits for Wood.

    Carbide-Tipped Steel

    Carbide tipped to stay sharp longer than tool steel bits, these are better on tough and abrasive materials, such as plywood and hardwoods. They have multiple teeth that cut away large amounts of material to bore clean, flat-bottom holes in wood. The center guide point keeps the bit stable and centered for drilling straight, angled, and overlapping holes, like those used create joints. Also known as Forstner bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Shank
    Size
    Drill Bit
    Point Type
    Each
    Carbide Tipped/Uncoated
     
    Round Shank
    1/4"
    		0.25"
    		3 1/2"3"5/32"Standard
    		0000000000000
     
    Extensions
    Each
    5" Extension for 5/16" Shank Size0000000000000
    10" Extension for 5/16" Shank Size000000000000

    Chip-Clearing Carbide-Tipped Drill Bits for Masonry and Concrete

    Prevent frequent stops to clear bits and reduce heat buildup that can damage them. The tight spiral flutes lift dust and debris out of the hole more quickly than standard masonry bits. These bits are especially effective for brittle material that creates a lot of debris, such as block and brick. The carbide tip resists wear to stay sharp.
    Round Shank for Rotary Only Drilling
    Image of Product. Front orientation. Drill Bits. Chip-Clearing Carbide-Tipped Drill Bits for Masonry and Concrete, Round Shank for Rotary Only Drilling.
    Pair these bits with hand-held power drills and hammer drills set to rotary-only mode. Because bits rotate only, they require more pressure to grind up material than other bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Shank
    Size
    Specs. Met
    Each
    Uncoated
     
    Standard Point
    5/32"
    		0.1563"
    		3"1.63"5/32"ANSI B212.15000000000000
     
    back to top