We will reply to your message within an hour.
More
These jobbers'-length bits have the rigidity and length required for most applications.
Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.
Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.
The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.
Three cutting edges instead of the typical two enable these bits to drill holes with a smoother finish than other bits.
Holes in these bits allow coolant to be run through the tool for more efficient chip evacuation. Use them in CNC machines with coolant-through technology.
Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. Also known as brad-point bits.
Harder, stronger, and more wear resistant than carbide-tipped steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.
Carbide-tipped bits maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.
The sharp point allows for gradual penetration to reduce friction and eliminate cracking and chipping when drilling in plastic.
Cobalt steel bits are heat resistant and maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.
Harder, stronger, and more wear resistant than high-speed steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.
Use for drilling in most metal.
With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.
Harder, stronger, and more wear resistant than cobalt steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.
With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. A 1/4" hex shank connects them directly to tools such as drills and power screwdrivers.
Insert these taps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank.
These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits.
Place on your workpiece.