7/32" Drill Bits | McMaster-Carr

Filter by

System of Measurement

Drill Bit Size

0.35 mm to 2.5 mm (Increments of 0.05 mm)

1", 1 1/32", 1 1/16", 1 1/8", 1 5/32", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2"

1.0 mm to 10.0 mm (Increments of 0.5 mm)

1.0 mm to 13.0 mm (Increments of 0.5 mm)

1.0 mm to 5.9 mm (Increments of 0.1 mm)

1.0 mm to 6.9 mm (Increments of 0.1 mm)

1.0 mm to 7.0 mm (Increments of 0.5 mm)

1/16" to 1/2" (Increments of 1/64")

1/16" to 1/2" (increments of 1/32")

1/16" to 1/4" (Increments of 1/64")

1/16" to 3/8" (Increments of 1/64")

1/2" to 1" (Increments of 1/64")

1/64" to 1/4" (increments of 1/64")

2.6 mm to 10.0 mm (Increments of 0.1 mm)

6.0 mm to 10.0 mm (Increments of 0.1 mm)

9/16" to 1" (increments of 1/16")

33/64" to 63/64" (Increments of 1/64")

For Use On

Length Class

Finish

Aluminum Titanium Nitride (AlTiN) Coated

Titanium Aluminum Nitride (TiAlN) Coated

Titanium Carbon Nitride (TiCN) Coated

Titanium Nitride (TiN) Coated

Shank Type

Drill Bit Point Type

Material

Overall Length

Shank Size

Point Angle

Flute Direction

Decimal Size Equivalent

Flute Type

Sold As

Maximum Drilling Depth

Bit Style

Number of Flutes

Thread Size

Screw Size

DFARS Specialty Metals

Compliant

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Compliant with Exemptions

Not Compliant

Number of Pieces

Length

166 Products

About Drill Bits

Compare material, finish, length class, and decimal size equivalents.

Drill Bits

Sold Individually

High-Speed Steel Drill Bits

Cut holes in a variety of metals, from the softest aluminum to the hardest steel

23 products

Cobalt Steel Drill Bits

Tough and wear resistant to last at least twice as long as high-speed steel bits

8 products

High-Speed Steel Step Drill Bits

Simplify jobs by drilling multiple hole sizes using a single bit

3 products

Carbide Drill Bits

The hardest and most wear-resistant drill bits you can buy

6 products

Cobalt Steel Step Drill Bits

One bit drills multiple hole sizes and lasts twice as long as high-speed steel

1 product

Left-Hand Cobalt Steel Drill Bits

The flutes spiral in the opposite direction of other bits and stay sharp longer than high-speed steel

3 products

Carbide-Tipped Drill Bits

Stronger than cobalt and high-speed steel, bits stay sharp at high temperatures

5 products

Carbide-Tipped Drill Bits for Masonry and Concrete

Crush tough materials to make holes in masonry

6 products

Chip-Clearing High-Speed Steel Drill Bits

Prevent clogs and dissipate heat when drilling most metals

7 products

Quick-Change Hex High-Speed Steel Drill Bits

Save time when you need to change bits frequently

2 products

Left-Hand High-Speed Steel Drill Bits

Remove stripped screws with flutes that spiral in reverse from other bits

2 products

High-Speed Steel Drill Bits for Plastic

Penetrate gradually to prevent cracking and chipping

1 product

Short-Flute High-Speed Steel Drill Bits

The rigidity of short-length bits without sacrificing reach

2 products

Coolant-Fed Carbide-Tipped Drill Bits

Coolant flows through the bit to reduce heat and evacuate chips

4 products

High-Speed Steel Precise-Cut Drill Bits for Wood

Point stays sharp longer to cut accurate straight and overlapping holes

1 product

Precise-Cut High-Speed Steel Drill Bits

Produce holes so precise that you don’t need to finish them with a reamer

1 product

Short-Flute Cobalt Steel Drill Bits

Combine the toughness and wear resistance of cobalt with short flutes for rigidity

3 products

Carbide-Tipped Drill Bits for Hardened Steel

Straight flutes withstand the heavy pressure needed to penetrate hardened steel

1 product

Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite

Drill abrasive materials cleanly

3 products

Coolant-Fed Carbide Drill Bits

The hardest and most wear-resistant bits deliver coolant to reduce heat and evacuate chips

2 products

Carbide Drill Bits for Hardened Steel

The hardest and most wear-resistant bits handle the heavy pressure needed to penetrate hardened steel

2 products

Precise-Cut Carbide Drill Bits

Even on the hardest materials, cut holes so precise that you don’t need to finish them with a reamer

1 product

Smooth-Finish Carbide Drill Bits

More cutting edges for a consistent finish

1 product

Chip-Clearing Cobalt Steel Drill Bits for Nickel and Stainless Steel

Aggressively cut difficult-to-machine metals without clogging

1 product

High-Speed Steel Drill Bits for Sheet Metal

Make shallow cuts without snagging and deforming thin metal and tubing

1 product

Chip-Clearing Cobalt Steel Drill Bits

Avoid clogs and dissipate heat with bits that last at least twice as long as high-speed steel

2 products

Short-Flute Carbide-Tipped Drill Bits

Our strongest short-flute bits stay sharp when drilling abrasive materials, such as titanium

2 products

Chip-Clearing Carbide Drill Bits

The hardest and most wear-resistant bits prevent clogs and dissipate heat

2 products

Carbide Drill Bits for Sheet Metal

The hardest and most wear-resistant bits make shallow cuts without snagging and deforming thin metal and tubing

1 product

Chip-Clearing High-Speed Steel Drill Bits for Aluminum, Brass, and Bronze

Wide flutes clear chips from soft metals that can gum up other drill bits

1 product

High-Speed Steel Drill Bits for Wood Screws

Match the exact thread and diameter of wood screws for a perfect fit

2 products

Hole-Starting Carbide Drill Bits

Harder and last longer than cobalt steel, bits create an accurate starting place in your workpiece

1 product

Drill Bits for Glass and Ceramic

Smoothly drill fragile materials so they don't chip or crack

3 products

Tapping Screw Installation Drill Bits for Masonry and Concrete

Slightly smaller than the screw size for a tight fit after installation

2 products

Other Products

Drill Bit Guides

Drill precise holes without building a fixture

3 products

Tap and Drill Bit Stands

Organize taps and drill bits by size

1 product

Center Drills

Drill cone-shaped openings to mate with lathe centers or start pilot holes for screws

31 products

Drill Bit Sharpeners

Sharpen steel, high-speed steel, cobalt steel, and carbide spiral bits

3 products

Countersinks

Cut a cone-shaped opening in a hole to install flat-head screws and rivets flush with the surface

12 products

Drill Bit Size Gauges

Match your drill bit to one of the holes to confirm its size

1 product

Drill Stops

Limit how far bits can drill to create identical hole depths every time

1 product

Drill Bit Extensions

Expand the reach of drill bits to get into deep and hard-to-reach spots

2 products

Steel

Strong, machinable, and weldable—all with material certificates for traceability

4 products

Drill Bushings

Fit in holes to guide drill bits and other cutting tools for precise and repeatable holes and cuts

2 products