We will reply to your message within an hour.
A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.
When you’re working up high, keep these wrenches secure at your side. Hook their tether ring to a carabiner or lanyard (not included), so they won’t fall to the ground if dropped.
Built for tough industrial conditions, these wrenches have a gasket that seals lubrication in and keeps dirt, dust, and moisture out to protect the ratchet mechanism. When it’s time to release the socket, just push the button on the back of the wrench head.
Sealed against dust, dirt, and moisture, these wrenches can be used in greasy machine shops and dusty construction sites.
The shaft on these wrenches extends and locks at set increments.
When the ratchet head becomes worn or damaged, change it out for a new one.
No need to pull the socket off the tool—push a button to release.
Also known as rotator ratchets, these wrenches let you rotate the grip to tighten a socket. They're useful when you don't have the space to swing the handle side to side.
Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.
Extend the length of these wrenches for more reach—the shaft locks into place at set increments. When it’s time to change your socket, release it with the push of a button.
The convenience of quick socket changes combined with the versatility of a folding wrench.
Pair these wrenches with a bolt-through socket to reach nuts at the bottom of a long threaded rod or bolt which can pass through the head of the wrench.
Flip between 1/4″ and 3/8″ drive-size sockets without switching out your wrench.
Customize the handle angle to reach over obstructions or fold the handle away to create a palm ratchet.
Made of aluminum-bronze, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.
With no internal screws, these ratchet wrenches don’t have a single small part that could fall into and damage equipment.
Pivot the head on these wrenches to access fasteners in tight spots.
Sealed with a gasket to keep lubrication in and debris out, these wrenches can be used in dusty environments. The head pivots, so you can access fasteners in tight places.
Reach over obstructions and access fasteners in tight spots—even in dirty and dusty areas. To protect the ratcheting mechanism, these wrenches have a gasket that seals lubrication in and keeps debris out.
Pivot the head and extend the handle—these wrenches adapt to reach fasteners in challenging spots. When it’s time to release the socket, just push the button on the back of the head.
Grip the angled handle on these wrenches to reach over obstructions and pivot the head to access fasteners in hard-to-reach places.
Prevent overtightening fasteners—you’ll feel the resistance from the fastener in your fingers, so you'll know when to stop. Also known as thumbwheel ratchets.
Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional clicking sound when turned.
Tighten or loosen fasteners with a socket or bit—these tools have a magnet for attaching both.
Position their head anywhere within 180° for more flexibility than flex-head ratchet wrenches.
Access fasteners in tight spots by pivoting the head to an optimal angle. These nonratcheting wrench handles are also known as breaker bars—they’re long enough for you to get the leverage needed to break stuck fasteners free.
Extend the shaft for additional length.
A ratcheting head on these wrench handles means there’s no need to reposition them when breaking stuck fasteners free. They’re also known as breaker bars.
Break stuck fasteners loose without causing sparks. Made of aluminum-bronze, these wrench handles meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Loosen stubborn fasteners while working up high—these wrench handles clip to a carabiner or lanyard (not included) to prevent drops.
Position the head anywhere along the handle.
The L shape provides clearance when reaching over obstructions.
Grip one side of the handle in each hand and twist to free stubborn fasteners.
Turn sockets from above when there's not room to swing a standard wrench handle.
The ratcheting mechanism turns sockets quickly.
A soft, contoured grip gives you a secure, comfortable hold. Use these handles to tighten and loosen sockets from above when there isn’t room to swing a standard wrench.
For more leverage to tighten or loosen fasteners compared to standard screwdriver-style socket handles, you can fold these handles 90 degrees.
Fasten quickly with these crank-style handles.
Use these versatile sets to turn sockets in a variety of hard-to-reach spots.
Faster than manual ratchet wrenches, these ratchet wrenches run on air to turn fasteners quickly.
Built to last, these wrenches have an enclosed steel head that seals lubrication in and dirt, dust, and moisture out to protect the ratchet mechanism. Since they’re air powered, these wrenches turn fasteners more quickly than handheld wrenches.
Turn lug bolts on car and truck wheels. These wrenches have a different socket size at each end.
Turn nuts on bolts and threaded rods, which can pass through the short end of the wrench. For additional leverage, slip a bar through the short end to create a T-handle.
Pivot the socket end to access hard-to-reach fasteners.
Tap components into alignment before fastening.
These wrenches have one pivoting socket end and one open end.
Also known as a can socket wrench, this tool opens telephone box fasteners and tightens nuts on binding posts.