Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Extra length allows access to fasteners on long bolts.

Tightly grip nuts and bolts with hand-driven tools, leaving finishes unscratched.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

Quickly position these sockets on square fasteners.

Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.

These sockets fit the nuts found on water and gas valves.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

These sockets are also known as pin-in-hex or pin-in-socket bits.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

Pivot the head to access fasteners from an angle.

A magnet holds the fastener securely enough to drive self-tapping screws.

Pivot the head to access fasteners from an angle.

Tighten or loosen nuts and bolts without damaging the finish.

Made of beryllium copper, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Quickly position these sockets on square fasteners.

The square shape provides the best possible grip on square fasteners and prevents rounding.

Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.

The hex shape grips hex fasteners and prevents rounding.

Made of aluminum-bronze, these extensions satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

The square drive has a rounded shape that allows the extension to pivot inside the socket opening and turn it from an angle.

Lock your socket into the extension to prevent accidental disengagement.

Push the square drive through the adapter to change size.

Turn sockets with a bit screwdriver.

Pivot the head to access fasteners from an angle.

Set a desired torque within the range.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.

A magnet holds the socket, making changes quicker.

Lock your socket into the extension to prevent accidental disengagement.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Bend these extensions around obstructions to access hard-to-reach fasteners.

Suitable for occasional maintenance work, these sets are imported.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

For high quality at a lower price, choose these U.S.A.-made sets.

Pivot the head to access fasteners from an angle.

With sizes from EP10 to EP24, these sets have the sockets you need to install and remove a wide range of External Torx-Plus fasteners. Pair them with a square drive tool, such as a socket wrench, to deliver high levels of torque without slipping.

Grip the indentations around the outside of tri-groove fasteners.

The short bit on these sockets fits in spaces where height clearance is limited.

Extra-long bits allow access to hard-to-reach fasteners.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

These sockets are also known as pin-in-Torx bits.

Extra-long bits allow access to hard-to-reach fasteners.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Lock your socket into the extension to prevent accidental disengagement..

Pivot the head to access fasteners from an angle.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Lock your socket into the extension to prevent accidental disengagement.

The handle is covered in rubber for a comfortable grip.

A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.

Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.

When the ratchet head becomes worn or damaged, change it out for a new one.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

The 25° offset head provides clearance when reaching over obstructions.

Bolts and threaded rod pass through these wrenches when used with bolt-through sockets.

Turn sockets in the most confined spaces.

Extend the shaft for additional length.

Position the head anywhere along the handle.

Bend around obstructions to turn hard-to-reach fasteners.

Pivot the head to access fasteners in tight spots.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Measure with an accuracy of ±2%.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Trust the precision of your measurements—these wrenches are accurate to ±2%.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Turn sockets from above when there's not room to swing a standard wrench handle.