Extra length allows access to fasteners on long bolts.

Pivot the head to access fasteners from an angle.

Pivot the head to access fasteners from an angle.

Also known as pipe plug sockets, these sockets have a square shape that provides the best possible grip on square fasteners and prevents rounding.

Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.

Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-hex or pin-in-socket bits.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

Pivot the head to access fasteners from an angle.

A magnet holds the fastener securely enough to drive self-tapping screws.

Pivot the head to access fasteners from an angle.

Tighten or loosen nuts and bolts without damaging the finish.

Pivot the head to access fasteners from an angle.

Extra length allows access to fasteners on long bolts.

The square shape provides the best possible grip on square fasteners and prevents rounding.

A magnet holds the fastener securely enough to drive self-tapping screws.

For high quality at a lower price, choose these U.S.A.-made sets.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

For high quality at a lower price, choose these U.S.A.-made sets.

Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts.

Quickly position these sockets on square fasteners.

Grip the indentations around the outside of tri-groove fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Lock your socket into the extension to prevent accidental disengagement..

Pivot the head to access fasteners from an angle.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Attach to your socket for a longer reach.

Remove and install dual wheels on trucks and trailers with the sockets in these sets.

Push the square drive through the adapter to change size.

Extend your socket's reach.

The square drive has a rounded shape that allows the extension to pivot inside the socket opening and turn it from an angle.

Lock your socket into the extension to prevent accidental disengagement.

The angled shape lets you use your bit driver like a wrench.

Pivot the head to access fasteners from an angle.

Adapters are set to a specific torque and cannot be adjusted.

Fit these adapters between your wrench and socket to enable finger tightening.

Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.

Bend these extensions around obstructions to access hard-to-reach fasteners.

A magnet holds the socket, making changes quicker.

Lock your socket into the extension to prevent accidental disengagement.

Pull the collar to quickly attach and remove sockets.

The handle is covered in rubber for a comfortable grip.

A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.

Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.

Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.

Pivot the head to access fasteners in tight spots.

The 20° offset head provides clearance when reaching over obstructions.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

Extend the shaft for additional length.

The L shape provides clearance when reaching over obstructions.

The ratcheting mechanism turns sockets quickly.

Pivot the head to access fasteners in tight spots.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

These wrenches have an accuracy of ±2.0%.

Measure with an accuracy of ±2%.

A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached.

Trust the precision of your measurements—these wrenches are accurate to ±2%.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.