Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

Push the bolt into the strike plate to secure doors, gates, and cabinets.

Slide the bolt and drop the knob into the notch to secure.

Pull the chain-grip to unlatch hard-to-reach doors and panels.

The strike has angled ends so these latches can accept their bolt even when doors become misaligned.

Choose these locks if you need locks that each open with a different key.

The mounting screws on these padlockable latches are concealed to prevent tampering.

These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.

Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.

Choose these locks to use your own compatible lock cylinder to match the keying of an existing system.

To provide more security than other master keyed deadbolt cabinet door locks, these locks have thicker bodies and longer bolts to resist prying.

Choose these locks if you need locks that each open with a different key.

Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.

With thicker bodies and longer bolts, these locks resist prying to provide more security than other keyed alike deadbolt cabinet door locks.

These strikes fit most deadbolt-style locks.

To provide more security than other master keyed deadbolt cabinet door locks, these locks have thicker bodies and longer bolts to resist prying.

Each of these cabinet locks opens with its own key.

These drawer locks open with their own keys and with a master key.

Choose these locks if you need locks that each open with a different key.

Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors.

Use these latches alone for single-point latching, or add latch kits for more holding power.

Use these latches alone for single-point latching or add latch kits for multiple-point latching and extra holding power.

The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.

In addition to being padlockable, these heavy duty latches come with two handles for access from the inside as well as the outside. They are often used on refrigerators and truck doors.

These latches are reversible for right- and left-hand mounting.

Latches snap shut when you push the bar in the strike plate to prevent accidental unlatching. Press the button on the strike plate to release the bar.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code.

Choose these cylinders if you need cylinders that each open with a different key.

This lock has a latch bolt to secure doors in the closed position.

Hold bathroom doors closed by swinging these latches into a notch in the strike plate.

Safeguard sliding doors in wire and chain link partitions.

Lock sliding windows in a closed position, or slightly open for ventilation.

Choose these locks if you need locks that each open with a different key.

These pins combine the locking capabilities of a clevis pin with the precision diameter of a dowel pin for a tight fit.

Also known as universal clevis pins, these pins have holes on 1/4" centers so you can change the length by moving the cotter pin.

These pins have multiple through holes; change the length by moving the cotter pin. The bend makes them easy to insert and pull out.

The bend makes these pins easy to insert and pull out.

Install or remove these pins from either side. Slide a retaining ring into the groove for a secure hold that takes up less space than a cotter pin.

Slide a retaining ring into the groove for a secure hold that takes up less space than a cotter pin.

A swivel handle makes these pins easy to install and remove, while the toggle locks them in place. Flip the toggle to release the pin.

The smooth ring handle on these pins won't catch on parts. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

For the tightest spaces, these narrow-grip pins have the smallest heads of any of our locking quick-release pins. They lock in place until you push the button to release the spring-loaded retaining balls.

The shaft on these pins retracts into the head to hold thin sheets of material together. Pins lock in place until you push the button to release the spring-loaded retaining balls.

An adjustable stop allows you to set anchors at consistent depths. Use with a hammer.

Also known as double expansion anchors, these expand from both sides for full contact and a secure hold.

Also known as caulk-in anchors, these stay secure when there's not much material to hold.

Install like a stud anchor—just thread the anchor, a nut, and a washer onto the end of a threaded rod, drive into a hole, and turn the nut to expand the base. Also known as rod anchors, they're often used with threaded rod to hang pipe and wiring.

More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water.

A zinc plating provides corrosion resistance in wet environments.