Material Material |
---|
|
Length Length |
---|
|
|
|
Minimum Installation Depth Minimum Installation Depth |
---|
|
|
|
Pull-Out Strength Pull-Out Strength |
---|
|
Shear Strength Shear Strength |
---|
|
Drill Bit Decimal Size Equivalent Drill Bit DecimalSize Equivalent |
---|
|
|
Specifications Met Specifications Met |
---|
|
Drive these tools with a hammer to expand anchors.
For technical drawings and 3-D models, click on a part number.
A zinc plating provides corrosion resistance in wet environments. Also known as drop-in anchors, these are often used for overhead applications because the anchor's internal plug expands in four directions to hold the anchor firmly inside the hole before inserting a threaded rod or bolt. To install, place the anchor into the hole, insert the required installation tool (sold separately) into the anchor, and drive with a hammer until the thicker portion of the tool makes contact with the anchor. When installed, anchors sit flush with the surface. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Drill Bit Size | Min. Installation Dp. | Dia. | Thread Dp. | Pull-Out | Shear | Tested In | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Carbon Steel | ||||||||||||
1/4"-20 | 1" | 3/8" | 1" | 3/8" | 7/16" | 495 | 530 | 4,000 psi Concrete | __ | 25 | 000000000 | 00000 |
3/8"-16 | 1 9/16" | 1/2" | 1 9/16" | 1/2" | 5/8" | 1,045 | 1,145 | 4,000 psi Concrete | FM Approved, UL Listed | 10 | 000000000 | 0000 |
1/2"-13 | 2" | 5/8" | 2" | 5/8" | 13/16" | 1,440 | 1,600 | 4,000 psi Concrete | FM Approved, UL Listed | 10 | 000000000 | 00000 |
5/8"-11 | 2 1/2" | 7/8" | 2 1/2" | 7/8" | 1 3/16" | 1,860 | 3,095 | 4,000 psi Concrete | FM Approved, UL Listed | 4 | 000000000 | 00000 |
3/4"-10 | 3 3/16" | 1" | 3 3/16" | 1" | 1 3/8" | 2,350 | 3,920 | 4,000 psi Concrete | FM Approved, UL Listed | 1 | 000000000 | 0000 |
More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water and may be mildly magnetic. Also known as drop-in anchors, they're often used for overhead applications because the anchor's internal plug expands in four directions to hold the anchor firmly inside the hole before inserting a threaded rod or bolt. To install, place the anchor into the hole, insert the required installation tool (sold separately) into the anchor, and drive with a hammer until the thicker portion of the tool makes contact with the anchor. When installed, anchors sit flush with the surface. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Drill Bit Size | Min. Installation Dp. | Dia. | Thread Dp. | Pull-Out | Shear | Tested In | Pkg. Qty. | Pkg. | |
316 Stainless Steel | |||||||||||
1/4"-20 | 1" | 3/8" | 1" | 3/8" | 7/16" | 495 | 530 | 4,000 psi Concrete | 1 | 000000000 | 00000 |
3/8"-16 | 1 9/16" | 1/2" | 1 9/16" | 1/2" | 5/8" | 1,045 | 1,145 | 4,000 psi Concrete | 1 | 000000000 | 0000 |
1/2"-13 | 2" | 5/8" | 2" | 5/8" | 13/16" | 1,440 | 1,600 | 4,000 psi Concrete | 1 | 000000000 | 0000 |
5/8"-11 | 2 1/2" | 7/8" | 2 1/2" | 7/8" | 1 3/16" | 1,860 | 3,095 | 4,000 psi Concrete | 1 | 000000000 | 00000 |
3/4"-10 | 3 3/16" | 1" | 3 3/16" | 1" | 1 3/8" | 2,350 | 3,920 | 4,000 psi Concrete | 1 | 000000000 | 00000 |
These 18-8 stainless steel anchors have good chemical resistance and may be mildly magnetic. Also known as drop-in anchors, they're often used for overhead applications because the anchor's internal plug expands in four directions to hold the anchor firmly inside the hole before inserting a threaded rod or bolt. To install, place the anchor into the hole, insert the required installation tool (sold separately) into the anchor, and drive with a hammer until the thicker portion of the tool makes contact with the anchor. When installed, anchors sit flush with the surface. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Drill Bit Size | Min. Installation Dp. | Dia. | Thread Dp. | Pull-Out | Shear | Tested In | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||||
1/4"-20 | 1" | 3/8" | 1" | 3/8" | 7/16" | 495 | 530 | 4,000 psi Concrete | 4 | 000000000 | 000000 |
3/8"-16 | 1 9/16" | 1/2" | 1 9/16" | 1/2" | 5/8" | 1,045 | 1,145 | 4,000 psi Concrete | 1 | 000000000 | 0000 |
1/2"-13 | 2" | 5/8" | 2" | 5/8" | 13/16" | 1,440 | 1,600 | 4,000 psi Concrete | 1 | 000000000 | 0000 |
5/8"-11 | 2 1/2" | 7/8" | 2 1/2" | 7/8" | 1 3/16" | 1,860 | 3,095 | 4,000 psi Concrete | 1 | 000000000 | 00000 |
3/4"-10 | 3 3/16" | 1" | 3 3/16" | 1" | 1 3/8" | 2,350 | 3,920 | 4,000 psi Concrete | 1 | 000000000 | 00000 |
Also known as caulk-in anchors, these stay secure when there's not much material to hold. When installed, the cone expands the sleeve to hold it firmly inside the hole. To install, insert the anchor cone end first and use an installation tool to drive the sleeve over the cone. Then, insert a screw or threaded rod and tighten. Pull-out strength and shear strength values are 25% of the ultimate values.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Min. Installation Dp. | Drill Bit Size | Dia. | Sleeve Material | Pull-Out | Shear | Tested In | For Use In | Pkg. Qty. | Pkg. | |
Zinc Alloy | ||||||||||||
8-32 | 9/16" | 1/2" | 5/16" | 5/16" | Lead | 85 | 85 | 4,000 psi Concrete | Block, Brick, Concrete | 25 | 000000000 | 000000 |
10-24 | 3/4" | 5/8" | 3/8" | 3/8" | Lead | 230 | 220 | 4,000 psi Concrete | Block, Brick, Concrete | 25 | 000000000 | 00000 |
1/4"-20 | 7/8" | 7/8" | 1/2" | 1/2" | Lead | 370 | 350 | 4,000 psi Concrete | Block, Brick, Concrete | 25 | 000000000 | 0000 |
5/16"-18 | 1" | 1" | 5/8" | 5/8" | Lead | 470 | 500 | 4,000 psi Concrete | Block, Brick, Concrete | 10 | 000000000 | 00000 |
3/8"-16 | 1 1/4" | 1 1/4" | 3/4" | 3/4" | Lead | 600 | 820 | 4,000 psi Concrete | Block, Brick, Concrete | 5 | 000000000 | 0000 |
1/2"-13 | 1 9/16" | 1 1/2" | 7/8" | 7/8" | Lead | 850 | 1,100 | 4,000 psi Concrete | Block, Brick, Concrete | 5 | 000000000 | 0000 |
5/8"-11 | 1 7/8" | 2" | 1 1/8" | 1 1/8" | Lead | 970 | 1,500 | 4,000 psi Concrete | Block, Brick, Concrete | 1 | 000000000 | 0000 |
3/4"-10 | 2" | 2 1/2" | 1 1/4" | 1 1/4" | Lead | 1,400 | 1,900 | 4,000 psi Concrete | Block, Brick, Concrete | 1 | 000000000 | 0000 |