Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

The mounting screws on these latches are concealed to prevent tampering.

Slide the bolt and drop the knob into the notch to secure.

Pull the chain-grip to unlatch hard-to-reach doors and panels.

The strike has angled ends so these latches can accept their bolt even when doors become misaligned.

Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.

These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.

These padlockable latches are often used on 2" and 3" track to keep garage and other sectional overhead doors closed.

Choose these locks if you need several locks that open with the same key.

These latches are reversible for right- and left-hand mounting.

Designed to stand up to heavy use, these latches are often seen on refrigerators and truck doors.

In addition to being padlockable, these heavy duty latches come with two handles for access from the inside as well as the outside. They are often used on refrigerators and truck doors.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

Operate these padlockable latches from either side of the door—there is a handle on both sides.

With a key-locking mechanism, these locks provide more security than other gate locks.

Push to close and pull up on the latch arm to open these padlockable latches.

Slide these latches into the strike plate to secure bathroom doors.

Maintain security by keeping your door latched as you open it up to 3".