McMaster-Carr

What's the best way to determine the clamp size you'll need? Simply measure the outside diameter of your hose with the fitting installed. Some clamps accommodate a range of sizes, so be sure the size you need falls in the middle of that range.

Closing Rings for Steel Drums

Lids for Steel Drums

Lid Seals for Steel Drums

Lids for Stainless Steel Drums

Material Handling

Side-Grip Fork-Mount Drum Movers

The arms on these drum movers automatically close and lock around the side of a drum when lifted with a forklift.

Top-Grip Fork-Mount Drum Movers

The jaws automatically grip the top of the drum when lifted with a forklift—great for areas with limited side clearance.

Manual Fork-Mount Drum Dispensers

These dispensers mount to the forks of a forklift for lifting and transport, plus they pivot for manual tilting so dispensing is easy.

Pull-Chain Fork-Mount
Drum Dispensers

Slide onto the forks of a forklift to raise a drum, then use the hand chain to tilt and drain it from up to 10 feet away.

Drum Lifters

Use with overhead lifting equipment to vertically lift closed-head drums and open-head drums with tightly secured lids.

Tilting Drum Lifters

Raise, transport, tilt, and drain full drums using the hook of a crane or hoist.

Drum Slings

These two-leg slings stack steel drums vertically and horizontally.

Clamps for Hose, Tube and Duct Hose

Tight-Seal Easy-Install Bolt
Clamps for Soft Hose and Tube

Remove the bolt and flip open the hinged bridge to install.

Tight-Seal Bolt Clamps
for Soft Hose and Tube

The bolt design provides high strength and creates a 360° seal to prevent leaks.

General Purpose Bolt
Clamps for Firm Hose

One clamp fits a wide range of diameters, so you can always have the right size on hand.

Tight-Seal High-Torque
Bolt Clamps for Firm Hose

Clamps offer extra holding power in high-torque applications.

Tight-Seal Twin-Ring Bolt
Clamps for Firm Hose

A double ring of thick wire provides a complete seal around large-diameter hose.

Tight-Seal Bolt Clamps
for Firm Hose and Tube

These clamps form a 360° seal around your hose or tube to prevent leaks.

Constant-Tension Bolt Clamps
for Firm Hose and Tube

The T-bolt design provides excellent strength and creates a 360° seal. Clamps have a spring that automatically adjusts the clamp diameter when temperatures fluctuate.

Terms and Conditions and Privacy Policy

About Measuring Hose and Tube Clamps

Drums