Add a gasket or replace one that's worn out to ensure a tight seal.

Secure 30- and 55-gallon steel drums.

Use these dust caps and plugs to keep contaminants out of your hose line.

Use these dust caps and plugs to keep contaminants out of your hose line.

Use these dust caps and plugs to keep contaminants out of your hose line.

Use these dust caps and plugs to keep contaminants out of your hose line.

Use these couplings at pressures up to 3,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Pioneer-shape plugs and sockets.

Not only do these PFA fittings have the chemical resistance to handle acid and salt water, they also have better crack resistance than other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Use these plastic fittings to connect gasoline fuel lines to machines and equipment. They have excellent corrosion resistance as well as high strength and impact resistance.

With thinner walls than Schedule 40 fittings, these are lighter in weight and have more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines. They are also known as SDR 35 fittings.

Extreme temperatures are no problem for these fittings—they’re made of PTFE, so they can withstand a wider temperature range than any of our other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°.

The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings.

Twist these fittings onto high-vacuum tubing to quickly make sealed, high-vacuum connections without the need for clamping, welding, or tools.

A PTFE seal on the tube end of these fittings allows for an extra-strong connection in high-vibration applications.

Made to tighter tolerances than other steel pipe fittings, these are also known as instrumentation fittings.

A galvanized finish gives these fittings better corrosion resistance than our plain steel high-pressure fittings. Also known as Class 3000 fittings.

The male threads on these fittings have a sealant applied for extra leak protection.

Use these fittings for low-pressure applications in noncorrosive environments.

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 140 psi.

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

Use these corrosion-resistant fittings in a low-pressure pipe line.

The male threads on these fittings have a sealant applied for extra leak protection.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

Use these fittings in low-pressure flow applications. They have good corrosion resistance.

The male threads on these brass fittings have a sealant applied for extra protection against leaks. Also known as Class 125 fittings, they are built for use in low-pressure applications.

These brass fittings have the strength to handle high-pressure applications.

Less than an inch in length, these miniature fittings work well in low-pressure pipe lines that are tight on space.