Get dry compressed air in high-pressure systems—these dryers have a maximum pressure rating of 300 psi. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

Each of these filter/dryers has two desiccant towers—one that absorbs moisture, particles, and oil in the air while the other reactivates saturated desiccant so you have an uninterrupted supply of clean, dry compressed air.

Install these dryers just before air-powered tools as final protection from water and particles and throw them away when you’re done.

These desiccants are best when relative humidity is at least 40%.

Use when relative humidity is below 40% or temperatures exceed 77° F.

When relative humidity is at least 90%, stick these desiccant bags to items that need to stay dry.

Reactivate these desiccants after use by heating them.

Stored in a durable canister, these desiccants can be reactivated after use.

Place these dehumidifiers in small spaces to protect moisture-sensitive materials such as photo lenses or 3D printing filaments. While they don’t need a battery or power cord during use, you do plug them in to dry them out—unlike other desiccants, they don’t require an oven.

From acid to xylene, these dry and liquid chemicals are useful in a wide range of industrial applications.