Over 48,000 metals now include traceable material certificates.

Turn a light socket into a radiant heater. These lamps generate heat with a ceramic element rather than an infrared bulb. Position them 6”-8” from what you want to heat. Lamps are also known as infrared and radiant heaters.

Note: Do not use in hazardous locations, such as enclosed areas exposed to fumes.

Position the lamp at any angle to heat, dry, soften, or defrost. It’s also known as an infrared and radiant heater.

Optional folding stand lets you use the lamp hands-free.

Note: Do not use in hazardous locations, such as enclosed areas exposed to fumes.

Clamp to the edge of a workbench or table and adjust the arm to direct heat where you need it. Position this lamp 10” to 14” from a surface to spot-dry paint, adhesive, and other coatings and fillers. It’s also known as an infrared and radiant heater.

Optional screw-in base (sold separately) allows you to surface mount the lamp.

Note: Do not use in hazardous locations, such as enclosed areas exposed to fumes.

Set the lamp on a bench top and the 360° rotating head directs light where you need it. It cannot be sold to Canada due to local regulatory limits on mercury content.

An optional lens filter (sold separately) lets you see extra-fine particles by reducing glare and the output of visible light.

Designed for UV curing of small areas, these lamps also aid in leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulatory limits on mercury content.

Cover large areas with this long lamp. Use for UV curing as well as leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulations on mercury content.

Use these lamps for UV curing as well as leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulatory limits on mercury content.

Use these chambers to dry coatings, inks, paints, and light-activated adhesives, or strengthen and finish 3D-printed parts made of liquid resin. With a light intensity five times greater than our bench-top ultraviolet lamp, these chambers work five times as quickly, cutting down curing time to seconds or minutes. The greater intensity also creates a deeper cure in your part. Light reflects off the chamber walls to give your piece a more consistent cure throughout, as well. The aluminum housing protects you by containing UV rays, and an automatic lamp shutter blocks light even when the door is open. Still, users should always wear UV-protective glasses and clothing when the system is turned on.

Setup is simple: Place the lamp on top of the housing, plug it into an electrical outlet, and the unit is ready to cure. The lamp’s light intensity is adjustable, so you can turn it down to avoid damaging sensitive material. An adjustable shelf accommodates items small to large. A timer ensures that the lamp won’t stay on for too long, leaving you free to do other tasks. With a handle on top, these chambers can be moved easily around your facility.

To remotely control and monitor, connect to PLCs using the 15-pin D-sub connector. Cord included.

Chambers and replacement bulbs cannot be sold to Canada due to regulations limiting mercury content.

For technical drawings and 3-D models, click on a part number.