Dust-Resistant Raceway
Gaskets on the covers and at connection points protect against dust as well as seeping oil and coolant. All components are rated NEMA 12 for indoor use and resistance to falling liquids and light splashing; nonhazardous dust, lint, and fibers; and oil and coolant seepage. They’re also rated IP54 to resist dust and splashing water.
Wall mounting brackets attach to the flange on raceway, 45° elbows, 90° elbows, reducers, and tees.
For Raceway | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Dp. | Mounting Hole Dia. | No. of Mounting Holes | Mounting Fasteners Included | Material | Color | Material Thick. | Includes | Environment | Environmental Rating | Each | |
| 2 1/2" | 2 1/2" | 5/16" | 4 | No | Painted Steel | Gray | 0.08" | Connecting Hardware | Corrosive, Damp, Dusty, Oily | IP54, NEMA 12 | 0000000 | 000000 |
| 4" | 4" | 5/16" | 4 | No | Painted Steel | Gray | 0.08" | Connecting Hardware | Corrosive, Damp, Dusty, Oily | IP54, NEMA 12 | 0000000 | 00000 |
| 6" | 6" | 5/16" | 4 | No | Painted Steel | Gray | 0.08" | Connecting Hardware | Corrosive, Damp, Dusty, Oily | IP54, NEMA 12 | 0000000 | 00000 |
| 8" | 8" | 5/16" | 4 | No | Painted Steel | Gray | 0.08" | Connecting Hardware | Corrosive, Damp, Dusty, Oily | IP54, NEMA 12 | 0000000 | 00000 |
Corrosion-Resistant Washdown Raceway
In areas exposed to washdowns, chemicals, and corrosion, install this stainless steel raceway system that has oil-resistant gaskets at the connection points. All components meet NEMA 4X standards for indoor and outdoor protection against corrosion and water projected from a hose.
Mounting brackets attach to the flange on raceway, 90° elbows, and tees.
For Raceway | Ceiling Beam Mounting Brackets | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Dp. | Material | Material Thick. | Mounting Hole Dia. | No. of Mounting Holes | Mounting Fasteners Included | Includes | Environment | Environmental Rating | Specifications Met | Each | |
| 4" | 4" | Stainless Steel | 0.08" | 9/32" | 7 | No | Connecting Hardware | Corrosive, Washdown | NEMA 4X | UL Listed, CSA Certified | 0000000 | 000000 |
Low-Profile Raceway
Surface mount this compact raceway system where you can't get inside walls to run power, data, and control wiring. It conceals wiring and takes up little space. All components are compatible with Wiremold raceway of the same size.
Raceway with a slide-on cover requires a mounting bracket (sold separately)—fasten the bracket to the wall and press the raceway into the bracket.
For Raceway | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Dp. | Material | Color | Mounting Hole Dia. | Mounting Fasteners Included | Features | Specifications Met | Each | |
| 3/4" | 17/32" | Steel | Ivory | 9/32" | No | Paintable Surface | UL Listed, C-UL Listed | 0000000 | 00000 |
Zinc-Plated Steel Formable Cable and Hose Trays
The zinc plating on these tray systems offers good corrosion resistance. Cut, bend, and connect the wire mesh trays to route cable and hose in configurations such as curves, slopes, and tees. They are a lightweight option for organizing bundles of cable and hose while keeping them accessible.
| For Tray Wd. | Material | Mounting Hole Dia. | Mounting Hardware Included | Each | |
For Horizontal Tray | |||||
|---|---|---|---|---|---|
| 4" | Zinc-Plated Steel | 7/16" | No | 0000000 | 00000 |
| 6" | Zinc-Plated Steel | 3/8" | No | 00000000 | 00000 |
| 8" | Zinc-Plated Steel | 7/16" | No | 0000000 | 00000 |
| 12" | Zinc-Plated Steel | 7/16" | No | 0000000 | 00000 |
| 16" | Zinc-Plated Steel | 3/8" | No | 00000000 | 00000 |
| 20" | Zinc-Plated Steel | 3/8" | No | 00000000 | 00000 |
| 24" | Zinc-Plated Steel | 3/8" | No | 00000000 | 00000 |
For Vertical Tray | |||||
| 8" | Zinc-Plated Steel | 5/16" | No | 0000000 | 0000 |
| 12" | Zinc-Plated Steel | 5/16" | No | 0000000 | 00000 |
Corrosion-Resistant Stainless Steel Formable Cable and Hose Trays
These are the most corrosion-resistant tray systems we offer for routing cable and hose in configurations such as curves, slopes, and tees. Cut, bend, and connect the wire mesh trays. They are a lightweight option for organizing bundles of cable and hose while keeping them accessible.
| For Tray Wd. | Material | Mounting Hole Dia. | Mounting Hardware Included | Each | |
For Horizontal Tray | |||||
|---|---|---|---|---|---|
| 4" | Stainless Steel | 11/32" | No | 0000000 | 000000 |
| 6" | Stainless Steel | 3/8" | No | 00000000 | 00000 |
| 8" | Stainless Steel | 13/32" | No | 0000000 | 00000 |
| 12" | Stainless Steel | 13/32" | No | 0000000 | 00000 |
| 16" | Stainless Steel | 3/8" | No | 00000000 | 00000 |
For Vertical Tray | |||||
| 8" | Stainless Steel | 5/16" | No | 0000000 | 00000 |
| 12" | Stainless Steel | 5/16" | No | 0000000 | 00000 |
Steel Formable Cable and Hose Trays
Cut, bend, and connect these wire mesh tray systems to route cable and hose in configurations such as curves, slopes, and tees. They are a lightweight option for organizing bundles of cable and hose while keeping them accessible.
All components are painted black to blend into dark backgrounds.
 For 4", 8", and 12" Wd. Horizontal Trays |  For 6", 16", 18", and 24" Wd. Horizontal Trays |
 For 8" and 12" Wd. Vertical Trays |
| For Tray Wd. | Material | Color | Mounting Hole Dia. | Mounting Hardware Included | Each | |
For Horizontal Tray | ||||||
|---|---|---|---|---|---|---|
| 4" | Painted Steel | Black | 7/16" | No | 0000000 | 00000 |
| 6" | Painted Steel | Black | 3/8" | No | 00000000 | 00000 |
| 8" | Painted Steel | Black | 7/16" | No | 0000000 | 00000 |
| 12" | Painted Steel | Black | 7/16" | No | 0000000 | 00000 |
| 16" | Painted Steel | Black | 3/8" | No | 00000000 | 00000 |
| 18" | Painted Steel | Black | 3/8" | No | 00000000 | 00000 |
| 24" | Painted Steel | Black | 3/8" | No | 00000000 | 00000 |
For Vertical Tray | ||||||
| 8" | Painted Steel | Black | 5/16" | No | 0000000 | 0000 |
| 12" | Painted Steel | Black | 5/16" | No | 0000000 | 00000 |