Determine the right pores per inch for your air filtering application—you'll receive several small samples with different pores per inch.

Wash and reuse these pads. Cut to the size you need.

Wrapped in aluminum mesh for added support, these filters can be used without a frame.

Cut these pads to the size you need.

These pads are an economical choice for protecting more expensive filters that catch finer particles.

Replace the filter roll in your automatic filtering equipment.

With a higher carbon concentration than odor-removal air filter rolls, these pads handle heavier odors.

Select the dimensions you need for custom-sized frames.

These filters are typically used as replacement filters in HVAC equipment. They have a tin-plated steel grill bonded to one side for support.

The filter material extends beyond the frame for a tight fit, creating a seal to prevent air from bypassing the filter around its edges.

Match the dimensions on expensive filters to create a custom-sized protective layer.

These washable, durable filters are made to your dimensions.

These filters are built to withstand higher temperatures than other metal panel air filters.

Rated MERV 11, these filters capture particles down to 1 micron.

Combine long life with the ability to capture particles down to 0.3 microns with these MERV 13 filters. The tightly pleated construction creates a large surface area for long service life.

Designed for use with electronic equipment, these filters can withstand prolonged exposure to heat and humidity.

Carbon granules in these filters remove odors. They are pleated to maximize filtering surface area without reducing airflow.

Use in exhaust hoods to remove grease and oil from the air.

These MERV 14 air filters capture particles down to 0.3 microns.

Multiple panels maximize filtering surface area for long service life.

The cartridges in these collectors are 98% efficient for particles 1 micron and larger—great for picking up fine dust such as graphite and talc.

Collect wood dust with these simple yet effective dust collectors. The base has wheels, so you can move the unit around for connection to different equipment. These collectors are 95% efficient for wood dust particles 25 microns and larger.

Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks.

These breather vents are rated NEMA 6 to withstand periodic submersion in water.

Secure access to vented openings in pipe and tanks—the cap can be locked to prevent tampering.

Minimize moisture buildup in enclosures. Also known as drain plugs, these breather vents have a small outlet that allows condensation to drain.

Rated NEMA 4X and IP66, these vents provide protection from washdowns, corrosion, and power jets of water.