How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Metal Cam-and-Groove Hose Couplings for Chemicals and Petroleum
Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.
Aluminum fittings are lighter in weight than 316 stainless steel fittings. They have good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.


- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets with butt-weld end are also known as DWB couplers. They have a beveled end that forms a trough for welding, creating a strong, permanent connection.
Sockets | Replacement Gaskets | Replacement Levers | Protective Plugs | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | Dash Size | Wall Thick. | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Aluminum with Brass Levers | ||||||||||||||||
2 | 2 1/2" | 2 | 32 | 0.15" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 0000000 | 000000 |
3 | 3 5/8" | 3 | 48 | 0.22" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 | 0000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 0.24" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 | 0000000 | 00000 |
316 Stainless Steel with 316 Stainless Steel Levers | ||||||||||||||||
1 1/2 | 2 1/8" | 1 1/2 | 24 | 0.14" | 2 | 304 Stainless Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 | 2 1/2" | 2 | 32 | 0.15" | 2 | 304 Stainless Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 0000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 0.22" | 2 | 304 Stainless Steel | 200 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 0000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 0.24" | 2 | 304 Stainless Steel | 150 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 0000000 | 00000 |