Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

A silicone additive gives this material a self-lubricating surface that reduces friction and extends the life of your parts.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.

Often used to make gears and wear strips, these cast nylon 6 sheets and bars withstand higher temperatures and are easier to machine than standard nylon 6/6 sheets and bars.

A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes.

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

Because this 6/12 material absorbs less water than standard nylon 6/6, it holds its shape better. It’s often machined into hose fittings and valve components.

Widely used to make parts that require autoclaving, polysulfone is a hard, rigid material that’s easy to machine and thermoform. It maintains its physical properties when heated, even when exposed to steam.

When excellent chemical resistance is combined with an ability to hold tight tolerances, the result is PPS—a material that’s widely machined into parts for chemical-processing applications. It is comparable to Techtron and Ryton.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

These rectangular tubes are flame retardant, machinable, and electrically insulating.

With a coating that reduces static electricity , these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.

Often used for terminal boards, electrical housings, end plates, and structural components in high temperatures, these sheets are a flame-retardant version of Garolite G-11. All are stronger and resist heat better than Garolite G-10/FR4.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

Used in turbine bearings, downpipe gaskets, and other machinery, these Garolite tubes withstand heavy impacts and temperatures as high as 500° F.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Use this Garolite glass carbon to divert static charges that can damage equipment.

Choose these Garolite G-7 rods for their high heat tolerance—they withstand temperatures up to 425° F. While not as strong as Garolite G-9, they offer better arc resistance in dry environments.

Machine these angles into arc barriers, switch mounts, and components for circuit breakers and electrical equipment. They resist carrying electric currents in dry or humid areas, even when exposed to sudden electric discharge.

A combination of high impact strength and extreme hardness makes Garolite E-glass very difficult to penetrate. It is often used for machine guards.

Garolite CE is often fabricated into parts where high strength is not required.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Keep shim stock in a variety of thicknesses on hand with these sets, which are color coded by thickness for easy identification. Cut them into custom shapes to fit your application.