Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Unlike other stainless steel fittings, these are made in the U.S.A. for superior quality. As another marker of quality, they come with a certificate with a traceable lot number and test report that guarantees material composition.

Use these corrosion-resistant fittings in a low-pressure pipe line.

These fittings are made to tighter tolerances than other stainless steel pipe fittings. They are also known as instrumentation fittings.

The male threads on these fittings have a sealant applied for extra leak protection.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

A galvanized finish gives these fittings better corrosion resistance than our plain steel high-pressure fittings. Also known as Class 3000 fittings.

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

A galvanized finish gives these fittings fair corrosion resistance. They have the strength to handle medium-pressure applications.

These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces.

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

Crimp these fittings onto steel pipe to form a tightly sealed connection that’s faster than threading or welding and doesn’t require heat.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slide the pipe into the socket and weld.

Also known as no-hub pipe fittings and soil pipe fittings, these fittings are for use in gravity-flow applications both above and below ground.

Designed for medium-pressure applications, these fittings have better strength than our low-pressure aluminum pipe fittings.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Also known as Schedule 40 fittings, these have thicker walls than our thin-wall aluminum unthreaded pipe fittings.

Not only do these brass fittings have the strength to handle high-pressure applications, the male threads have a sealant applied for extra protection against leaks.

When space in your pipe line is limited, choose these miniature fittings that are one inch or less in length.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

Use these fittings in low-pressure flow applications. They have good corrosion resistance.

Extreme pressures are no problem for these heavy-duty brass fittings.

The polished chrome plating not only has a shiny appearance, but also improves corrosion resistance on these Class 125 fittings.

Also known as Silbraze fittings.

Also known as Class 200 fittings.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Use for pressures up to 60 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications up to 200° F.

Also known as Victaulic fittings, these have grooved ends that connect to pipe with a clamp, so you can access your chemical process line for routine maintenance. Fittings have excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances.

Also known as manifold flange fittings, these have a clamp-together design that lets you access your line for routine maintenance. Fittings resist acids, solvents, and other harsh chemicals. They won’t deteriorate when exposed to the damaging effects of ultraviolet light, so they’re suitable for outdoor use.

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.

These fittings have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. They are commonly used in metal surface treating applications, plating solution lines, and other chemical process applications. Reinforced with layers of fiberglass, they have better strength and durability than any of our other pipe fittings for chemicals.

Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

With thinner walls than Schedule 40 fittings, these are lighter in weight and have more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines. They are also known as SDR 35 fittings.

Bolt two same-size flanges together with a gasket to create an access point within a line. Also known as Schedule 40 flanges, they are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

The threads on these fittings mate with NPT, NPTF, BSPT, and BSPP threads.

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

Made of nickel-plated brass, these tube fittings resist corrosion better than plain brass fittings. The male threaded ends connect to NPT, NPTF, BSPP, BSPT, and other universal threads, so you don’t have to bother matching exact thread types.

Use at pressures up to 250 psi.

Ball bearings allow these fittings to rotate 360°, even after they are tightened. They have a special seal that reduces friction to allow for continuous rotation.

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

Monitor flow with these clear fittings.

Made of stainless steel, these fittings have better corrosion resistance than brass fittings.

Aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

Multiple barbs grip onto tubing.

Silver ions in the material help inhibit the growth of bacteria, mold, fungi, and other odor-causing microbes.

These compression tube fittings meet Department of Transportation FMVSS 571 safety standards for air brake lines.

These fittings include a nut with a built-in sleeve (ferrule), so there’s no need to remove the nut for assembly.

Lighter in weight than their metal counterparts, these compression fittings are polypropylene.

Fittings can withstand temperatures up to 200° F.

These brass fittings meet NSF/ANSI 372 for drinking water. They include a nut with a built-in sleeve (ferrule), so there’s no need to remove the nut for assembly.

These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 140 psi.

Fittings have a barb that grips onto tubing. Use in applications up to 120 psi.

Fittings have a sleeve that bites into tubing as you tighten the nut to form a seal in applications up to 120 psi. Also known as flareless fittings.