How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About On/Off Valves
More
Metal Barbed Hose Fittings for Chemicals and Petroleum
Made of stainless steel, these fittings stand up to a wide variety of chemicals, as well as fuels, gasoline, and oils. To connect, slide the barbed end into plastic or rubber hose and secure with a clamp.
Adapters are also known as hose nipples; they adapt a barbed end to a threaded end.

- For Use With: Acetone, Boric Acid, Citric Acid, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil
- Maximum Pressure: 300psi @ 72° F
- Temperature Range: -30° to 200° F
- Attachment Type: Use Band-and-Buckle Clamps
Metal Cam-and-Groove Hose Couplings for Chemicals and Petroleum
Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.
Aluminum fittings are lighter in weight than 316 stainless steel fittings. They have good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.

- For Use With:
Aluminum: Diesel Fuel, Gasoline, Hydraulic Fluid
316 Stainless Steel: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid - Temperature Range: -40° to 200° F
- Compatible With: Dixon Cam-and-Groove
Adapters with railroad tank car threads have a standard 5" swivel nut for offloading a railroad tank car.
Coupling Size | Plug OD | Threaded End Dia. | Each | |
316 Stainless Steel | ||||
---|---|---|---|---|
4 | 4 3/4" | 5" | 0000000 | 0000000 |

- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
90° elbow sockets with female threaded end are also known as LD couplers.
Sockets | Replacement Gaskets | Replacement Levers | Protective Plugs | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Aluminum with Brass Levers | |||||||||||||||
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 | 0000000 | 000000 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 | 0000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 0000 | 0000000 | 00000 |
Aluminum with 316 Stainless Steel Levers | |||||||||||||||
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 0000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 0000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 0000000 | 00000 |
316 Stainless Steel with 316 Stainless Steel Levers | |||||||||||||||
1 | 1 7/16" | 1 | 16 | 2 | 304 Stainless Steel | 250 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | 304 Stainless Steel | 250 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 | 2 1/2" | 2 | 32 | 2 | 304 Stainless Steel | 250 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 0000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 2 | 304 Stainless Steel | 200 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 0000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 2 | 304 Stainless Steel | 150 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 0000000 | 00000 |

- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
90° elbow sockets with barbed end are also known as CL couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Sockets | Replacement Gaskets | Replacement Levers | Protective Plugs | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | For Hose ID | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Aluminum with Brass Levers | |||||||||||||||
1 | 1 7/16" | 1" | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2" | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
2 | 2 1/2" | 2" | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 | 0000000 | 000000 |
3 | 3 5/8" | 3" | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 | 0000000 | 00000 |
4 | 4 3/4" | 4" | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 0000 | 0000000 | 00000 |
Aluminum with 316 Stainless Steel Levers | |||||||||||||||
1 | 1 7/16" | 1" | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2" | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 | 2 1/2" | 2" | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 0000000 | 00000 |
3 | 3 5/8" | 3" | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 0000000 | 00000 |
4 | 4 3/4" | 4" | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 0000000 | 00000 |
316 Stainless Steel with 316 Stainless Steel Levers | |||||||||||||||
1 | 1 7/16" | 1" | 16 | 2 | 304 Stainless Steel | 250 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 0000 | 000000000 | 0000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2" | 24 | 2 | 304 Stainless Steel | 250 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 | 2 1/2" | 2" | 32 | 2 | 304 Stainless Steel | 250 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 0000000 | 00000 |
3 | 3 5/8" | 3" | 48 | 2 | 304 Stainless Steel | 200 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 0000000 | 00000 |
4 | 4 3/4" | 4" | 64 | 2 | 304 Stainless Steel | 150 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 0000000 | 00000 |
On/Off Valves with Push-to-Connect Fittings for Chemicals




Push to Connect ×
Push to Connect
Insert tubing into the fittings on these valves—no heat, solder, or flux required. To withstand aggressive and corrosive solutions, they have a chemical-resistant fluoroelastomer seal and a plastic body.
Full-port valves do not restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Ball
- For Use With:
Connector: Air, Argon, Carbon Dioxide, Citric Acid, Deionized Water, Ethylene Glycol, Fuel Oil, Helium, Isopropyl Alcohol, Krypton, Natural Gas, Neon, Nitrogen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xenon
Adapter: Air, Citric Acid, Ethylene Glycol, Helium, Isopropyl Alcohol, Mineral Spirits, Natural Gas, Nitrogen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sulfuric Acid, Water - Ball Material: Polypropylene Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
90° Elbow Adapter, Push to Connect × Female NPT Threaded | ||||||||
---|---|---|---|---|---|---|---|---|
1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 000000 |
1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
1/2 | 1/2" | 2.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Male NPT Threaded | ||||||||
1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Push to Connect | ||||||||
__ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
__ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
__ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
90° Elbow Connector, Push to Connect × Push to Connect | ||||||||
__ | 1/4" × 1/4" | 0.6 | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
__ | 3/8" × 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
__ | 1/2" × 1/2" | 2.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
- Valve Type: Ball
- For Use With:
Connector: Air, Argon, Carbon Dioxide, Citric Acid, Deionized Water, Ethylene Glycol, Helium, Isopropyl Alcohol, Krypton, Natural Gas, Neon, Nitrogen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xenon
Adapter: Air, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xylene - Ball Material: PVDF Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
90° Elbow Adapter, Push to Connect × Female NPT Threaded | ||||||||
---|---|---|---|---|---|---|---|---|
1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 000000 |
1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
1/2 | 1/2" | 2.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Male NPT Threaded | ||||||||
1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Push to Connect | ||||||||
__ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
__ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
__ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
90° Elbow Connector, Push to Connect × Push to Connect | ||||||||
__ | 1/4" × 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
__ | 3/8" × 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
__ | 1/2" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
- Valve Type: Ball
- For Use With: Air, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Helium, Kerosene, Mineral Spirits, Nitrogen, Salt Water, Soap Solutions, Water, Xylene
- Ball Material: Nylon Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
90° Elbow Adapter, Push to Connect × Female NPT Threaded | ||||||||
---|---|---|---|---|---|---|---|---|
1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 000000 |
1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
1/2 | 1/2" | 2.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Male NPT Threaded | ||||||||
1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Push to Connect | ||||||||
__ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
__ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
__ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
90° Elbow Connector, Push to Connect × Push to Connect | ||||||||
__ | 1/4" × 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
__ | 3/8" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
__ | 1/2" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
On/Off Valves with Barbed Fittings for Chemicals
Barbs grip onto tubing, providing a secure hold. To withstand aggressive and corrosive solutions in chemical-processing applications, these valves have a plastic body and a chemical-resistant seal.
Polypropylene valves offer good heat resistance. Use them in systems that connect to a heater.
Lever handles show the valve’s position.Valves with tapered barbs can be used with multiple tube sizes.
Full-port valves do not restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

- Valve Type: Ball
- For Use With: Air, Argon, Carbon Dioxide, Citric Acid, Deionized Water, Ethylene Glycol, Fuel Oil, Helium, Isopropyl Alcohol, Krypton, Natural Gas, Neon, Nitrogen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xenon
- Ball Material: Polypropylene Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
Pipe Size | For Tube ID | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
NPT Male × Tapered Barbed | ||||||||
---|---|---|---|---|---|---|---|---|
1/4 | 3/8", 1/2", 5/8" | 1.4 | 125 psi @ 140° F | 40° to 140° | Full | 2 5/16" | 00000000 | 000000 |