Elbows for Ethyl Alcohol

Filter by

Shape

Tube OD

Fitting Connection

Thread Type

Pipe Size

Material

Tube Material

Connects To

For Use With

Acetic Acid (White Vinegar)

Acetic Acid (White Vinegar) (5% Concentration)

Acetic Acid (White Vinegar) (10% Concentration)

Acetic Acid (White Vinegar) (75% Concentration)

Hydrochloric Acid (10% Concentration)

Hydrochloric Acid (25% Concentration)

Hydrochloric Acid (37% Concentration)

Liquid Carbon Dioxide

Nitric Acid (10% Concentration)

Phosphoric Acid (70% Concentration)

Phosphoric Acid (85% Concentration)

Salt Water (30% Concentration)

Silane

Soap Solutions

Sodium Carbonate (Soda Ash)

Sodium Hydroxide (Caustic Soda)

Sodium Hydroxide (Caustic Soda) (50% Concentration)

Sodium Hypochlorite (Bleach)

Steam

Sulfur Hexafluoride

Sulfuric Acid

Sulfuric Acid (30% Concentration)

Sulfuric Acid (70% Concentration)

Sulfuric Acid (75% Concentration)

Sulfuric Acid (80% Concentration)

Tungsten Hexafluoride

Gender

System of Measurement

Sleeve Material

Fitting Type

Nut Material

For Tube Wall Thickness

Maximum Pressure @ Temperature

For Tube Fabrication

Dash Size

Export Control Classification Number (ECCN)

2B999

EAR99

DFARS Specialty Metals

REACH

RoHS

Compliant with Exemptions

Maximum Temperature

Maximum Vacuum @ Temperature

Not Rated

Compatible With

Parker CPI

For Tube Specifications Met

142 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

90º Elbow Adapters, Tube × Male Threaded Pipe

For Use With:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: Air, Water, Hydraulic Fluid
316 Stainless Steel: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
Temperature Range: See table
Tubing: See table
Specifications Met:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: SAE J514
316 Stainless Steel: ISO 8434, DIN 2353

For Tube
OD	Wall Thick.	Pipe Size	Material	Sleeve Material	Max. Pressure	Temp. Range, °F	For Tube Material	For Tube Specifications Met	For Tube Fabrication		Each
NPT Threads
6mm	1mm	1/8	316 Stainless Steel	316 Stainless Steel	4,500 psi @ 72° F	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	0000000	000000
8mm	1-1.5mm	1/4	316 Stainless Steel	316 Stainless Steel	4,500 psi @ 72° F	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	0000000	00000
10mm	1-2mm	1/4	316 Stainless Steel	316 Stainless Steel	4,500 psi @ 72° F	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	0000000	00000
12mm	1-2mm	3/8	316 Stainless Steel	316 Stainless Steel	4,500 psi @ 72° F	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	0000000	00000
BSPT Threads
6mm	1mm	1/8	316 Stainless Steel	316 Stainless Steel	4,500 psi @ 72° F	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	0000000	00000
8mm	1-1.5mm	1/4	316 Stainless Steel	316 Stainless Steel	4,500 psi @ 72° F	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	0000000	00000
10mm	1-2mm	1/4	316 Stainless Steel	316 Stainless Steel	4,500 psi @ 72° F	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	0000000	00000

90° Elbow Connectors, Tube

For Use With:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: Air, Water, Hydraulic Fluid
316 Stainless Steel: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
Temperature Range:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: -420° to 1200° F
316 Stainless Steel: -75° to 750° F
Tubing:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A269
316 Stainless Steel: Use with seamless 304 or 316/316L/316Ti stainless steel that meets DIN EN 10216-5 or DIN EN 10305-1
Specifications Met:
316 Stainless Steel with 17-4 PH Stainless Steel Sleeve: SAE J514
316 Stainless Steel: ISO 8434, DIN 2353

For Tube
OD	Wall Thick.	Material	Sleeve Material	Max. Pressure		Each
6mm	1mm	316 Stainless Steel	316 Stainless Steel	7,200 psi @ 72° F	0000000	000000
8mm	1-1.5mm	316 Stainless Steel	316 Stainless Steel	7,200 psi @ 72° F	0000000	00000
10mm	1-2mm	316 Stainless Steel	316 Stainless Steel	7,200 psi @ 72° F	0000000	00000
12mm	1-2mm	316 Stainless Steel	316 Stainless Steel	5,800 psi @ 72° F	0000000	00000
15mm	1-2mm	316 Stainless Steel	316 Stainless Steel	5,800 psi @ 72° F	0000000	00000
18mm	1.5-2mm	316 Stainless Steel	316 Stainless Steel	5,800 psi @ 72° F	0000000	00000
22mm	1.5-2mm	316 Stainless Steel	316 Stainless Steel	3,600 psi @ 72° F	0000000	00000
28mm	1.5-2mm	316 Stainless Steel	316 Stainless Steel	3,600 psi @ 72° F	0000000	000000

Nuts

For Use With: See table
Temperature Range: See table
Tubing: See table
Specifications Met: See table

For Tube
OD	Wall Thick.	Nut Material	Max. Pressure	For Use With	Temp. Range, °F	For Tube Material	For Tube Specifications Met	For Tube Fabrication	Specifications Met		Each
6mm	1mm	316 Stainless Steel	7,200 psi @ 72° F	Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	DIN 2353, ISO 8434-1	0000000	00000
8mm	1-1.5mm	316 Stainless Steel	7,200 psi @ 72° F	Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	DIN 2353, ISO 8434-1	0000000	0000
10mm	1-2mm	316 Stainless Steel	7,200 psi @ 72° F	Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	DIN 2353, ISO 8434-1	0000000	0000
12mm	1-2mm	316 Stainless Steel	5,800 psi @ 72° F	Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	DIN 2353, ISO 8434-1	0000000	0000
15mm	1-2mm	316 Stainless Steel	5,800 psi @ 72° F	Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	DIN 2353, ISO 8434-1	0000000	00000
18mm	1.5-2mm	316 Stainless Steel	5,800 psi @ 72° F	Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	DIN 2353, ISO 8434-1	0000000	00000
22mm	1.5-2mm	316 Stainless Steel	3,600 psi @ 72° F	Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	DIN 2353, ISO 8434-1	0000000	00000
28mm	1.5-2mm	316 Stainless Steel	3,600 psi @ 72° F	Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water	-75° to 750°	304 Stainless Steel, 316/316L/316Ti Stainless Steel	DIN EN 10216-5, DIN EN 10305-1	Seamless	DIN 2353, ISO 8434-1	0000000	00000

Sleeves

For Use With:
17-4 PH Stainless Steel: Air, Hydraulic Fluid, Water
316 Stainless Steel: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
Temperature Range:
17-4 PH Stainless Steel: -420° to 1200° F
316 Stainless Steel: -75° to 750° F
Tubing:
17-4 PH Stainless Steel: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A269
316 Stainless Steel: Use with seamless 304 or 316/316L/316Ti stainless steel that meets DIN EN 10216-5 or DIN EN 10305-1
Specifications Met:
17-4 PH Stainless Steel: SAE J514
316 Stainless Steel: ISO 8434-1, DIN 2353

For Tube
OD	Wall Thick.	Sleeve Material	Max. Pressure		Each
15mm	1-2mm	316 Stainless Steel	5,800 psi @ 72° F	0000000	00000
18mm	1.5-2mm	316 Stainless Steel	5,800 psi @ 72° F	0000000	0000
22mm	1.5-2mm	316 Stainless Steel	3,600 psi @ 72° F	0000000	0000
28mm	1.5-2mm	316 Stainless Steel	3,600 psi @ 72° F	0000000	0000

Precision Compression Fittings for Stainless Steel Tubing

For Use With: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
Temperature Range: -420° to 1200° F
Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
Compatible With: Parker CPI

Made to tighter tolerances than other compression fittings, these are designed for high-precision applications. Also known as instrumentation fittings and flareless fittings. They come with a nut and a single sleeve (ferrule). The sleeve bites into tubing as you tighten the nut to create a strong seal. Fittings are 316 stainless steel for excellent corrosion resistance. A molybdenum disulfide coating on the nut acts as a lubricant for easy installation.

90° Elbow Adapters, Tube × Male NPT Threaded Pipe

For Tube
OD	Wall Thick.	Pipe Size	Material	Max. Pressure		Each
1/16"	0.02"	1/16	316 Stainless Steel	7,500 psi @ 72° F	0000000	000000
1/8"	0.035"	1/8	316 Stainless Steel	5,500 psi @ 72° F	0000000	00000
1/8"	0.035"	1/4	316 Stainless Steel	5,500 psi @ 72° F	00000000	00000
3/16"	0.035"	1/8	316 Stainless Steel	5,500 psi @ 72° F	0000000	00000
1/4"	0.035"	1/8	316 Stainless Steel	4,000 psi @ 72° F	0000000	00000
1/4"	0.035"	1/4	316 Stainless Steel	4,000 psi @ 72° F	0000000	00000
1/4"	0.035"	3/8	316 Stainless Steel	4,000 psi @ 72° F	0000000	00000
1/4"	0.035"	1/2	316 Stainless Steel	4,000 psi @ 72° F	0000000	00000
5/16"	0.035"	1/8	316 Stainless Steel	3,200 psi @ 72° F	0000000	00000
5/16"	0.035"	1/4	316 Stainless Steel	3,200 psi @ 72° F	0000000	00000
3/8"	0.035"	1/8	316 Stainless Steel	2,600 psi @ 72° F	0000000	00000
3/8"	0.035"	1/4	316 Stainless Steel	2,600 psi @ 72° F	0000000	00000
3/8"	0.035"	3/8	316 Stainless Steel	2,600 psi @ 72° F	0000000	00000
3/8"	0.035"	1/2	316 Stainless Steel	2,600 psi @ 72° F	0000000	00000
1/2"	0.035"	1/2	316 Stainless Steel	2,100 psi @ 72° F	0000000	00000
5/8"	0.049"	1/2	316 Stainless Steel	2,100 psi @ 72° F	0000000	00000
3/4"	0.049"	3/4	316 Stainless Steel	2,100 psi @ 72° F	0000000	00000

90° Elbow Connectors, Tube

For Tube
OD	Wall Thick.	Material	Max. Pressure		Each
1/16"	0.02"	316 Stainless Steel	7,500 psi @ 72° F	0000000	000000
1/8"	0.035"	316 Stainless Steel	5,500 psi @ 72° F	00000000	00000
3/16"	0.035"	316 Stainless Steel	5,500 psi @ 72° F	00000000	00000
1/4"	0.035"	316 Stainless Steel	4,000 psi @ 72° F	00000000	00000
5/16"	0.035"	316 Stainless Steel	3,200 psi @ 72° F	00000000	00000
3/8"	0.035"	316 Stainless Steel	2,600 psi @ 72° F	00000000	00000
1/2"	0.035"	316 Stainless Steel	2,100 psi @ 72° F	0000000	00000
5/8"	0.049"	316 Stainless Steel	2,100 psi @ 72° F	0000000	00000
3/4"	0.049"	316 Stainless Steel	2,100 psi @ 72° F	0000000	00000

Nuts

For Tube
OD	Wall Thick.	Nut Material	Max. Pressure
1/16"	0.02"	Molybdenum-Disulfide-Coated 316 Stainless Steel	7,500 psi @ 72° F	00000000
1/8"	0.035"	Molybdenum-Disulfide-Coated 316 Stainless Steel	5,500 psi @ 72° F	00000000
3/16"	0.035"	Molybdenum-Disulfide-Coated 316 Stainless Steel	5,500 psi @ 72° F	00000000
1/4"	0.035"	Molybdenum-Disulfide-Coated 316 Stainless Steel	4,000 psi @ 72° F	00000000
5/16"	0.035"	Molybdenum-Disulfide-Coated 316 Stainless Steel	3,200 psi @ 72° F	00000000
3/8"	0.035"	Molybdenum-Disulfide-Coated 316 Stainless Steel	2,600 psi @ 72° F	00000000
1/2"	0.035"	Molybdenum-Disulfide-Coated 316 Stainless Steel	2,100 psi @ 72° F	00000000
5/8"	0.049"	Molybdenum-Disulfide-Coated 316 Stainless Steel	2,100 psi @ 72° F	00000000
3/4"	0.049"	Molybdenum-Disulfide-Coated 316 Stainless Steel	2,100 psi @ 72° F	00000000

Sleeves

For Tube
OD	Wall Thick.	Sleeve Material	Max. Pressure
1/16"	0.02"	316 Stainless Steel	7,500 psi @ 72° F	00000000
1/8"	0.035"	316 Stainless Steel	5,500 psi @ 72° F	00000000
3/16"	0.035"	316 Stainless Steel	5,500 psi @ 72° F	00000000
1/4"	0.035"	316 Stainless Steel	4,000 psi @ 72° F	00000000
5/16"	0.035"	316 Stainless Steel	3,200 psi @ 72° F	00000000
3/8"	0.035"	316 Stainless Steel	2,600 psi @ 72° F	00000000
1/2"	0.035"	316 Stainless Steel	2,100 psi @ 72° F	00000000
5/8"	0.049"	316 Stainless Steel	2,100 psi @ 72° F	00000000
3/4"	0.049"	316 Stainless Steel	2,100 psi @ 72° F	00000000

Nickel-Plated Brass Compression Fittings for Copper Tubing

For Use With: Air, Cutting Oil, Diesel Fuel, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Lubricants, Mineral Oil, Natural Gas, Steam, Water
Temperature Range: -75° to 550° F, except 90° elbow adapters with BSPP threads are 0° to 170° F
Tubing: Use with copper
Specifications Met: DIN 3861, except nuts meet DIN 3870

With a nickel-plated finish, these compression fittings resist corrosion better than plain brass fittings. They have a single sleeve (ferrule) made of plain brass that gently bites into copper tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. These fittings are also known as flareless fittings. All meet DIN standards for tube fitting dimensions.

90° Elbow Adapter, Tube × Male Threaded Pipe

90° Elbow
Adapter, Tube × Male
Threaded Pipe (BSPP)

90° Elbow
Adapter, Tube × Male
Threaded Pipe (BSPT)

For Tube
OD, mm	Wall Thickness, mm	Pipe Size	Material	Maximum Pressure		Each
BSPP Threads
4	1	1/8	Nickel-Plated Brass	1,800 psi @ 72° F	00000000	00000
6	1	1/8	Nickel-Plated Brass	2,500 psi @ 72° F	00000000	0000
6	1	1/4	Nickel-Plated Brass	2,500 psi @ 72° F	00000000	0000
8	1	1/8	Nickel-Plated Brass	2,100 psi @ 72° F	00000000	0000
8	1	1/4	Nickel-Plated Brass	2,100 psi @ 72° F	00000000	0000
10	1	1/4	Nickel-Plated Brass	1,600 psi @ 72° F	00000000	0000
12	1	3/8	Nickel-Plated Brass	1,000 psi @ 72° F	00000000	00000
BSPT Threads
4	1	1/8	Nickel-Plated Brass	1,800 psi @ 72° F	0000000	0000
6	1	1/8	Nickel-Plated Brass	2,500 psi @ 72° F	0000000	0000
6	1	1/4	Nickel-Plated Brass	2,500 psi @ 72° F	0000000	0000
8	1	1/8	Nickel-Plated Brass	2,100 psi @ 72° F	0000000	0000
8	1	1/4	Nickel-Plated Brass	2,100 psi @ 72° F	0000000	0000
14	1	1/2	Nickel-Plated Brass	1,000 psi @ 72° F	0000000	0000

90° Elbow Connectors, Tube

90° Elbow Connector, Tube

For Tube
OD, mm	Wall Thickness, mm	Material	Maximum Pressure		Each
6	1	Nickel-Plated Brass	2,500 psi @ 72° F	0000000	00000
8	1	Nickel-Plated Brass	2,100 psi @ 72° F	0000000	0000
12	1	Nickel-Plated Brass	1,000 psi @ 72° F	0000000	0000
15	1	Nickel-Plated Brass	1,000 psi @ 72° F	0000000	00000

Nuts

Nut

For Tube
OD, mm	Wall Thickness, mm	Nut Material	Maximum Pressure	Length, mm		Each
Short Nuts
4	1	Nickel-Plated Brass	1,800 psi @ 72° F	11	00000000	00000
6	1	Nickel-Plated Brass	2,500 psi @ 72° F	12	00000000	000
8	1	Nickel-Plated Brass	2,100 psi @ 72° F	12	00000000	000
10	1	Nickel-Plated Brass	1,600 psi @ 72° F	16	00000000	0000
12	1	Nickel-Plated Brass	1,000 psi @ 72° F	16	00000000	0000
14	1	Nickel-Plated Brass	1,000 psi @ 72° F	19	00000000	0000
15	1	Nickel-Plated Brass	1,000 psi @ 72° F	17	00000000	0000

Sleeves

Sleeve

For Tube
OD, mm	Wall Thickness, mm	Sleeve Material	Maximum Pressure		Each
4	1	Brass	1,800 psi @ 72° F	00000000	00000
6	1	Brass	2,500 psi @ 72° F	00000000	000
8	1	Brass	2,100 psi @ 72° F	00000000	000
10	1	Brass	1,600 psi @ 72° F	00000000	000
12	1	Brass	1,000 psi @ 72° F	00000000	000
14	1	Brass	1,000 psi @ 72° F	00000000	000
15	1	Brass	1,000 psi @ 72° F	00000000	000

Precision Compression Fittings for Copper Tubing

For Use With: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
Temperature Range: -40° to 350° F
Tubing: Use with seamless copper that meets ASTM B68, ASTM B75, or ASTM B88
Compatible With: Parker CPI

Made to tighter tolerances than other compression fittings, these are designed for high-precision applications. They are also known as instrumentation fittings and flareless fittings. They come with a nut and a single sleeve (ferrule). The sleeve bites into tubing as you tighten the nut to create a strong seal. Fittings are brass for good corrosion resistance.

Fittings with a molybdenum-disulfide brass nut are easy to install because the coating acts as a lubricant.

90° Elbow Adapters, Tube × Male Threaded Pipe

For Tube
OD	Wall Thick.	Pipe Size	Material	Nut Material	Max. Pressure		Each
NPT Threads
1/8"	0.035"	1/8	Brass	Molybdenum-Disulfide-Coated Brass	2,700 psi @ 72° F	0000000	000000
1/8"	0.035"	1/4	Brass	Molybdenum-Disulfide-Coated Brass	2,700 psi @ 72° F	0000000	00000
3/16"	0.035"	1/8	Brass	Brass	2,300 psi @ 72° F	0000000	00000
1/4"	0.035"	1/8	Brass	Molybdenum-Disulfide-Coated Brass	1,200 psi @ 72° F	0000000	00000
1/4"	0.035"	1/4	Brass	Molybdenum-Disulfide-Coated Brass	1,200 psi @ 72° F	0000000	00000
1/4"	0.035"	3/8	Brass	Brass	1,600 psi @ 72° F	0000000	00000
1/4"	0.035"	1/2	Brass	Molybdenum-Disulfide-Coated Brass	1,200 psi @ 72° F	0000000	00000
5/16"	0.035"	1/8	Brass	Brass	1,200 psi @ 72° F	0000000	00000
5/16"	0.035"	1/4	Brass	Brass	1,200 psi @ 72° F	0000000	00000
3/8"	0.035"	1/8	Brass	Molybdenum-Disulfide-Coated Brass	1,000 psi @ 72° F	0000000	00000
3/8"	0.035"	1/4	Brass	Molybdenum-Disulfide-Coated Brass	1,000 psi @ 72° F	0000000	00000
3/8"	0.035"	3/8	Brass	Molybdenum-Disulfide-Coated Brass	1,000 psi @ 72° F	0000000	00000
3/8"	0.035"	1/2	Brass	Molybdenum-Disulfide-Coated Brass	1,000 psi @ 72° F	0000000	00000
1/2"	0.049"	1/2	Brass	Molybdenum-Disulfide-Coated Brass	1,200 psi @ 72° F	0000000	00000
5/8"	0.065"	1/2	Brass	Molybdenum-Disulfide-Coated Brass	1,300 psi @ 72° F	0000000	00000
3/4"	0.065"	3/4	Brass	Molybdenum-Disulfide-Coated Brass	1,000 psi @ 72° F	0000000	00000

90° Elbow Connectors, Tube

For Tube
OD	Wall Thick.	Material	Nut Material	Max. Pressure		Each
1/16"	0.02"	Brass	Molybdenum-Disulfide-Coated Brass	3,800 psi @ 72° F	00000000	000000
1/4"	0.035"	Brass	Molybdenum-Disulfide-Coated Brass	1,200 psi @ 72° F	00000000	00000
3/8"	0.035"	Brass	Molybdenum-Disulfide-Coated Brass	1,000 psi @ 72° F	00000000	00000
1/2"	0.049"	Brass	Molybdenum-Disulfide-Coated Brass	1,200 psi @ 72° F	00000000	00000
5/8"	0.065"	Brass	Molybdenum-Disulfide-Coated Brass	1,300 psi @ 72° F	00000000	00000
3/4"	0.065"	Brass	Molybdenum-Disulfide-Coated Brass	1,000 psi @ 72° F	00000000	00000

Nuts

For Tube
OD	Wall Thick.	Nut Material	Max. Pressure		Each
1/16"	0.02"	Molybdenum-Disulfide-Coated Brass	3,800 psi @ 72° F	00000000	00000
1/8"	0.035"	Molybdenum-Disulfide-Coated Brass	2,700 psi @ 72° F	00000000	0000
3/16"	0.035"	Molybdenum-Disulfide-Coated Brass	1,200 psi @ 72° F	00000000	0000
1/4"	0.035"	Molybdenum-Disulfide-Coated Brass	1,200 psi @ 72° F	00000000	0000
5/16"	0.035"	Brass	1,200 psi @ 72° F	00000000	0000
3/8"	0.035"	Molybdenum-Disulfide-Coated Brass	1,000 psi @ 72° F	00000000	0000
1/2"	0.049"	Molybdenum-Disulfide-Coated Brass	1,200 psi @ 72° F	00000000	0000
5/8"	0.065"	Molybdenum-Disulfide-Coated Brass	1,300 psi @ 72° F	00000000	0000
3/4"	0.065"	Molybdenum-Disulfide-Coated Brass	1,000 psi @ 72° F	00000000	0000

Front and Back Sleeves

For Tube
OD	Wall Thick.	Sleeve Material	Max. Pressure		Each
1/16"	0.02"	Brass	3,800 psi @ 72° F	00000000	00000
1/8"	0.035"	Brass	2,700 psi @ 72° F	00000000	0000
3/16"	0.035"	Brass	1,200 psi @ 72° F	00000000	0000
1/4"	0.035"	Brass	1,200 psi @ 72° F	00000000	0000
5/16"	0.035"	Brass	1,200 psi @ 72° F	00000000	0000
3/8"	0.035"	Brass	1,000 psi @ 72° F	00000000	0000
1/2"	0.049"	Brass	1,200 psi @ 72° F	00000000	0000
5/8"	0.065"	Brass	1,300 psi @ 72° F	00000000	0000
3/4"	0.065"	Brass	1,000 psi @ 72° F	00000000	0000