Elbows for Krypton | McMaster-Carr

Search Results

Clear All

	Shape Shape


90° Elbow	Double 90° Elbow

Wye

	Pipe Size Pipe Size

	Thread Type Thread Type

NPT

NPTF

UNF

	Connection Style Connection Style


Threaded	Barbed

Push to Connect	Yor-Lok

	For Use With For Use With	Show

Krypton

	For Use With For Use With	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

	Body Material Body Material

	Connection Type Connection Type


Pipe	Tube

Hose

	Handle Style Handle Style


Wheel	Lever

T-Handle	Knob

	Valve Type Valve Type

	Gender Gender

Female

Male

	Maximum Pressure Maximum Pressure

	Valve Function Valve Function

Flow Adjustment

On/Off

Diverting

	Maximum Temperature Maximum Temperature

100° to 249° F

250° to 499° F

500° to 999° F

	Minimum Temperature Minimum Temperature

-49° to 0° F

Greater than 0° F

Not Rated

	Flow Coefficient (Cv) Flow Coefficient (Cv)

0.02
0.2
0.3
0.6
0.7
0.8
1.1
1.2
1.4
1.5
1.6
2.1
2.7
3.1
3.6
3.8
4.4
5.1
7.3
9.2
16
28
39
66
Not Rated

	System of Measurement System of Measurement

Inch

	Length Length

	Overall Height Overall Height

	Fitting Type Fitting Type

Connector

Adapter

	Valve Operation Valve Operation

Handle

Toggle Switch

Screwdriver

	Port-to-Port Length Port-to-Port Length

	For Tube OD For Tube OD

1/4"

3/8"

1/2"

	Seat Material Seat Material

Plastic

Rubber

Brass

Bronze

	Actuation Actuation

Manual

Electric (Solenoid)

View catalog pages (15)

Forward

How can we improve?

98 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

About Actuated On/Off Valves

About On/Off Valves

About Precision Flow-Adjustment Valves

About Flow-Adjustment Valves

Threaded Hose Fittings for Compressed Gas

Use these fittings to connect welding hose to pressure regulators and torches. They are also known as CGA (Compressed Gas Association) fittings. Fittings are brass for good corrosion resistance.

Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.

90° Elbow Connectors, Male Hose

Maximum Pressure: 200 psi @ 72° F
Maximum Temperature: 120° F

Brass
CGA Number	Trade Size	Thread Size	Thread Type	Thread Direction	For Use With		Each
032	B	5/8"-18	UN/UNF (CGA)	Right Hand	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	0000000	000000

Threaded Flow-Adjustment Valves

90° Elbow with Wheel Handle

These valves gradually open and close to adjust and regulate flow.

Wheel handles open and close with multiple turns, providing more controlled, shock-resistant flow than lever handles.

Rising stems lift as the valve opens and lower as the valve closes to provide a visual indication of whether flow is on or off. The stem is isolated from the process media for a longer service life than valves with a nonrising stem.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Bronze Body—125 Pressure Class

Valve Type: Globe
For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
Specifications Met: MSS-SP-80

						Wheel Handle
Pipe Size	Flow Coefficient (Cv)	Max. Pressure	Temperature Range, °F	Port-to-Port Lg.	Stem Type		Each
NPT Female × NPT Female—90° Elbow
1/4	1.6	200 psi @ 150° F	-20° to 405°	3/4"	Rising	0000000	000000
3/8	3.1	200 psi @ 150° F	-20° to 405°	15/16"	Rising	0000000	00000
1/2	5.1	200 psi @ 150° F	-20° to 405°	1"	Rising	0000000	00000
3/4	9.2	200 psi @ 150° F	-20° to 405°	1 1/4"	Rising	0000000	00000
1	16	200 psi @ 150° F	-20° to 405°	1 7/16"	Rising	0000000	000000
1 1/4	28	200 psi @ 150° F	-20° to 405°	1 11/16"	Rising	0000000	000000
1 1/2	39	200 psi @ 150° F	-20° to 405°	1 13/16"	Rising	0000000	000000
2	66	200 psi @ 150° F	-20° to 405°	2 3/16"	Rising	0000000	000000

Bronze Body—150 Pressure Class

Valve Type: Globe
For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
Specifications Met: MSS-SP-80

						Wheel Handle
Pipe Size	Flow Coefficient (Cv)	Max. Pressure	Temperature Range, °F	Port-to-Port Lg.	Stem Type		Each
NPT Female × NPT Female—90° Elbow
1/4	1.6	300 psi @ 150° F	-20° to 405°	1 1/16"	Rising	0000000	000000
3/8	3.1	300 psi @ 150° F	-20° to 405°	1 3/16"	Rising	0000000	00000
1/2	5.1	300 psi @ 150° F	-20° to 405°	1 3/16"	Rising	0000000	00000
3/4	9.2	300 psi @ 150° F	-20° to 405°	1 7/16"	Rising	0000000	00000
1	16	300 psi @ 150° F	-20° to 405°	1 3/4"	Rising	0000000	000000
1 1/4	28	300 psi @ 150° F	-20° to 405°	2 1/16"	Rising	0000000	000000
1 1/2	39	300 psi @ 150° F	-20° to 405°	2 1/4"	Rising	0000000	000000
2	66	300 psi @ 150° F	-20° to 405°	2 3/4"	Rising	0000000	000000

Bronze Body—300 Pressure Class

Valve Type: Globe
For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
Specifications Met: MSS-SP-80

						Wheel Handle
Pipe Size	Flow Coefficient (Cv)	Max. Pressure	Temperature Range, °F	Port-to-Port Lg.	Stem Type		Each
NPT Female × NPT Female—90° Elbow
1/4	1.6	600 psi @ 150° F	-20° to 550°	1 1/16"	Rising	0000000	000000
3/8	3.1	600 psi @ 150° F	-20° to 550°	1 3/16"	Rising	0000000	00000
1/2	5.1	600 psi @ 150° F	-20° to 550°	1 1/4"	Rising	0000000	00000
3/4	9.2	600 psi @ 150° F	-20° to 550°	1 1/2"	Rising	0000000	000000
1	16	600 psi @ 150° F	-20° to 550°	1 3/4"	Rising	0000000	000000
1 1/4	28	600 psi @ 150° F	-20° to 550°	2 1/16"	Rising	0000000	000000
1 1/2	39	600 psi @ 150° F	-20° to 550°	2 1/4"	Rising	0000000	000000
2	66	600 psi @ 150° F	-20° to 550°	2 3/4"	Rising	0000000	000000

High-Pressure Threaded Precision
Flow-Adjustment Valves

Often used in hydraulic and compressed air systems, these valves can withstand at least 6,000 psi. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control.

Metal-to-metal seats resist temperature fluctuations.

Valves with packing have a nut that can be tightened to compress the packing if it leaks.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Steel Body—Metal-to-Metal Seat

Valve Type: Needle
For Use With: See table

Valves										Mounting Nuts
	Pipe Size	Flow Coefficient (Cv)	Max. Pressure	Temperature Range, °F	Packing Material	Port-to-Port Lg.	For Use With		Each		Pair
NPT Female × NPT Female
K	1/8	0.7	10000 psi @ 100° F	-20° to 500°	PTFE Plastic	1"	Oil, Air, Argon, Helium, Krypton, Neon, Xenon	0000000	000000	0000000	000000
K	1/4	0.8	10000 psi @ 100° F	-20° to 500°	PTFE Plastic	1"	Oil, Air, Argon, Helium, Krypton, Neon, Xenon	0000000	00000	0000000	00000
K	1/2	1.5	10000 psi @ 100° F	-20° to 500°	PTFE Plastic	1 11/16"	Oil, Air, Argon, Helium, Krypton, Neon, Xenon	0000000	00000	0000000	00000
K	3/4	4.4	10000 psi @ 100° F	-20° to 500°	PTFE Plastic	2"	Oil, Air, Argon, Helium, Krypton, Neon, Xenon	0000000	000000	0000000	00000
K	3/8	1.6	10000 psi @ 100° F	-20° to 500°	PTFE Plastic	1 11/16"	Oil, Air, Argon, Helium, Krypton, Neon, Xenon	0000000	00000	0000000	00000
NPT Male × NPT Female
L	1/4	0.6	10000 psi @ 100° F	-20° to 500°	PTFE Plastic	1"	Oil, Air, Argon, Helium, Krypton, Neon, Xenon	0000000	00000	0000000	00000
L	1/2	1.5	10000 psi @ 100° F	-20° to 500°	PTFE Plastic	1 11/16"	Oil, Air, Argon, Helium, Krypton, Neon, Xenon	0000000	00000	0000000	00000

Panel-Mount Threaded Precision Flow-Adjustment Valves

Female × Female 90° Elbow

Female × Male 90° Elbow

Valve Type: Needle
For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon

For installation in instrument panels, these valves have a hex nut and threads below the handle. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. All valves have metal-to-metal seats that resist temperature fluctuations. They have a nut that can be tightened to compress the packing if it leaks.

Nickel-plated brass valves are more corrosion resistant than plain brass valves.

Valves with a 303 stainless steel needle are more corrosion resistant than valves with a brass needle.

For technical drawings and 3-D models, click on a part number.

Brass Body—90° Elbow
Pipe Size	Flow Coefficient (Cv)	Max. Pressure	Temperature Range, °F	Panel Cutout Dia.	Body Material	Needle Material	Port-to-Port Lg.		Each
NPT Female × NPT Female
1/4	0.6	500 psi @ 180° F	-20° to 180°	9/16"	Brass	303 Stainless Steel	15/16"	0000000	000000
1/4	0.6	500 psi @ 180° F	-20° to 180°	9/16"	Brass	Brass	15/16"	0000000	00000
NPT Female × NPT Male
1/4	0.6	500 psi @ 180° F	-20° to 180°	9/16"	Brass	303 Stainless Steel	15/16"	0000000	00000
1/4	0.6	500 psi @ 180° F	-20° to 180°	9/16"	Brass	Brass	15/16"	0000000	00000
Nickel-Plated Brass Body—90° Elbow
NPT Female × NPT Female
1/4	0.6	500 psi @ 180° F	-20° to 180°	9/16"	Nickel-Plated Brass	303 Stainless Steel	15/16"	00000000	00000
1/4	0.6	500 psi @ 180° F	-20° to 180°	9/16"	Nickel-Plated Brass	Brass	15/16"	00000000	00000
NPT Female × NPT Male
1/4	0.6	500 psi @ 180° F	-20° to 180°	9/16"	Nickel-Plated Brass	303 Stainless Steel	15/16"	00000000	00000
1/4	0.6	500 psi @ 180° F	-20° to 180°	9/16"	Nickel-Plated Brass	Brass	15/16"	00000000	00000

Threaded Precision Flow-Adjustment Valves

Also known as needle valves, these adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Turn the handle to adjust flow. All valves have metal-to-metal seats that resist temperature fluctuations.

303 stainless steel valves are more corrosion resistant than brass and steel valves.

316 stainless steel valves have the best corrosion resistance.

Valves with packing have a nut that can be tightened to compress the packing if it leaks.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

UNF Male × UNF Female

Valve Type: Needle
For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon

303 Stainless Steel Body with Knob Handle
Thread Size	Flow Coefficient (Cv)	Max. Pressure	Temperature Range, °F	Packing Material	Port-to-Port Lg.		Each
10-32	0.02	300 psi @ 70° F	0° to 430°	Fluoroelastomer Rubber	5/16"	00000000	000000
316 Stainless Steel Body with Knob Handle
10-32	0.02	300 psi @ 70° F	0° to 430°	Fluoroelastomer Rubber	5/16"	00000000	00000

Compact Precision Flow-Adjustment
Valves with Barbed Fittings

Handle Operated

Screwdriver Operated

Valve Type: Needle
For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
Seal Material: Buna-N Rubber

With a low-profile body and a narrow port-to-port length, these valves fit in tight spots. Barbs grip onto tubing, providing a secure hold. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Valves have metal-to-metal seats that resist temperature fluctuations.

Screwdriver-operated valves require a slotted screwdriver (not included) to open and close.

303 stainless steel valves are more corrosion resistant than nickel-plated brass valves.

Handle-Operated
For Tube ID	Max. Pressure	Temperature Range, °F	Panel Cutout Dia.	Port-to-Port Lg.		Each
Nickel-Plated Brass Body
Barbed × Barbed
1/16"	180 psi @ 150° F	-40° to 200°	5/16"	7/16"	00000000	000000
303 Stainless Steel Body
Barbed × Barbed
1/8"	180 psi @ 150° F	-40° to 200°	5/16"	9/16"	00000000	00000
Screwdriver-Operated
Nickel-Plated Brass Body
Barbed × Barbed
1/16"	180 psi @ 150° F	-40° to 200°	5/16"	7/16"	00000000	00000
303 Stainless Steel Body
Barbed × Barbed
1/8"	180 psi @ 150° F	-40° to 200°	5/16"	9/16"	00000000	00000

On/Off Valves with Push-to-Connect Fittings

Insert tubing into the fittings on these valves—no heat, solder, or flux required.

Full-port valves do not restrict flow.

Standard-port valves slightly restrict flow.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Elbow with Lever Handle

Push to Connect × Push to Connect

NPT Female × Push to Connect

Valve Type: See table
For Use With: Air, Argon, Helium, Krypton, Neon, Water, Xenon
Seal Material: EPDM Rubber

Dark Gray PVC Plastic Body—Ball Valve Type
Pipe Size	For Tube OD	Flow Coefficient (Cv)	Max. Pressure	Temperature Range, °F	Port Type	Port-to-Port Lg.		Each
Push to Connect × Push to Connect
__	1/4"	Not Rated	125 psi @ 140° F	35° to 140°	Full	1 7/16"	0000000	000000
__	3/8"	Not Rated	125 psi @ 140° F	35° to 140°	Full	1 7/16"	0000000	00000
__	1/2"	Not Rated	125 psi @ 140° F	35° to 140°	Full	1 7/16"	0000000	00000
NPT Female × Push to Connect
1/4	1/4"	Not Rated	125 psi @ 140° F	35° to 140°	Full	1 7/16"	0000000	00000
1/4	3/8"	Not Rated	125 psi @ 140° F	35° to 140°	Full	1 7/16"	0000000	00000
1/4	1/2"	Not Rated	125 psi @ 140° F	35° to 140°	Full	1 7/16"	0000000	00000
1/2	1/4"	Not Rated	125 psi @ 140° F	35° to 140°	Standard	1 7/16"	0000000	00000
1/2	3/8"	Not Rated	125 psi @ 140° F	35° to 140°	Standard	1 7/16"	0000000	00000
1/2	1/2"	Not Rated	125 psi @ 140° F	35° to 140°	Standard	1 7/16"	0000000	00000
Dark Gray PVC Plastic Body—Plug Valve Type
NPT Female × Push to Connect
1/4	1/4"	1.1	125 psi @ 70° F	35° to 140°	Standard	1 1/4"	0000000	0000
1/4	3/8"	Not Rated	125 psi @ 70° F	35° to 140°	Standard	1 1/4"	0000000	0000
White Polypropylene Plastic Body—Plug Valve Type
NPT Female × Push to Connect
1/4	1/4"	1.1	125 psi @ 70° F	35° to 140°	Standard	1 1/4"	0000000	0000
1/4	3/8"	Not Rated	125 psi @ 70° F	35° to 140°	Standard	1 1/4"	0000000	0000

Panel-Mount Threaded On/Off Valves

For installation in instrument panels, these valves have threads and a hex nut below the handle.

Full-port valves do not restrict flow.

Standard-port valves slightly restrict flow.

316 stainless steel valves are more corrosion resistant than brass valves.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Elbow

Female × Female

Female × Male

Male × Male

Valve Type: Ball
For Use With:
316 Stainless Steel: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon, Steam
Brass: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
Seal Material:
316 Stainless Steel: PTFE Plastic
Brass: Fluoroelastomer Rubber

316 Stainless Steel Body
Pipe Size	Flow Coefficient (Cv)	Max. Pressure	Temperature Range, °F	Vacuum Rating, in. of Hg	Port Type	Port-to-Port Lg.	Panel Cutout Dia.		Each
NPT Female × NPT Female
1/8	0.3	3000 psi @ 70° F	-30° to 295°	29	Standard	13/16"	19/32"	00000000	000000
1/4	0.8	3000 psi @ 70° F	-30° to 295°	29	Standard	1"	25/32"	00000000	000000
Brass Body
NPT Female × NPT Female
1/8	1.4	1500 psi @ 70° F	-30° to 295°	29	Full	15/16"	9/16"	0000000	00000
1/4	1.6	1500 psi @ 70° F	-30° to 295°	29	Full	15/16"	9/16"	0000000	00000
3/8	2.7	600 psi @ 70° F	-30° to 295°	29	Standard	1 1/8"	9/16"	0000000	00000
1/2	2.7	600 psi @ 70° F	-30° to 295°	29	Standard	1 3/16"	9/16"	0000000	00000
NPT Female × NPT Male
1/4	1.6	1500 psi @ 70° F	-30° to 295°	29	Standard	13/16"	9/16"	00000000	00000
NPT Male × NPT Male
1/8	1.4	1500 psi @ 70° F	-30° to 295°	29	Full	1"	9/16"	0000000	00000
1/4	1.6	1500 psi @ 70° F	-30° to 295°	29	Full	1"	9/16"	0000000	00000
3/8	2.7	600 psi @ 70° F	-30° to 295°	29	Standard	1 1/16"	9/16"	0000000	00000
1/2	2.7	600 psi @ 70° F	-30° to 295°	29	Standard	1 5/16"	9/16"	0000000	00000

Fast-Acting Panel-Mount Threaded On/Off Valves

Open and close these valves with the flip of the toggle switch. Commonly used for equipment testing and gas sampling, they have threads and a hex nut below the handle for installation in instrument panels.

316 stainless steel valves are more corrosion resistant than brass valves.

Manual-return valves remain open or closed when the toggle is moved into position.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

Elbow

NPTF Female × NPTF Female

NPT Male × NPT Male

Valve Type: Stem
For Use With:
Buna-N Rubber Seal: Water, Oil, Air
All Other Valves: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon

Brass Body—Fluoroelastomer Rubber Seal
Pipe Size	Flow Coefficient (Cv)	Max. Pressure	Temperature Range, °F	Toggle Switch Type	Port-to-Port Lg.	Panel Cutout Dia.		Each
NPTF Female × NPTF Female
1/8	0.3	200 psi @ 70° F	-15° to 250°	Manual Return	3/4"	9/16"	0000000	000000
1/4	1.2	125 psi @ 70° F	-15° to 250°	Manual Return	3/4"	9/16"	0000000	00000
Brass Body—PTFE Plastic Seal
NPT Male × NPT Male
1/4	0.2	300 psi @ 200° F	-20° to 200°	Manual Return	1"	17/32"	0000000	00000
316 Stainless Steel Body—PTFE Plastic Seal
NPT Male × NPT Male
1/4	0.2	300 psi @ 200° F	-20° to 200°	Manual Return	1"	17/32"	0000000	00000

Plastic Threaded On/Off Valves

T-handles resist accidental movement when snagged or bumped.

Full-port valves do not restrict flow.

Standard-port valves slightly restrict flow.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Elbow with Lever Handle

Female × Female

Female × Male

Male × Female

Male × Male

Valve Type: Ball
For Use With: Air, Argon, Helium, Krypton, Neon, Water, Xenon
Seal Material: Buna-N Rubber

Dark Gray PVC Plastic Body
Pipe Size	Flow Coefficient (Cv)	Max. Pressure	Temperature Range, °F	Port Type	Port-to-Port Lg.		Each
NPT Female × NPT Female
1/4	Not Rated	125 psi @ 140° F	35° to 140°	Full	1 3/16"	00000000	00000
3/8	2.7	125 psi @ 140° F	35° to 140°	Full	1 3/16"	00000000	0000
NPT Female × NPT Male
1/4	Not Rated	125 psi @ 140° F	35° to 140°	Full	1 11/16"	00000000	0000
1/2	3.8	125 psi @ 140° F	35° to 140°	Standard	1 5/16"	00000000	00000
3/8	Not Rated	125 psi @ 140° F	35° to 140°	Full	1 3/16"	00000000	0000
NPT Male × NPT Female
3/4	3.8	125 psi @ 140° F	35° to 140°	Standard	1 7/16"	00000000	00000
NPT Male × NPT Male
1/2	3.8	125 psi @ 140° F	35° to 140°	Standard	1 5/16"	00000000	00000
3/4	3.8	125 psi @ 140° F	35° to 140°	Standard	1 5/16"	00000000	00000

Plastic On/Off Valves with Barbed Fittings

Barbs grip onto tubing, providing a secure hold.

Full-port valves do not restrict flow.

Standard-port valves slightly restrict flow.

For technical drawings and 3-D models, click on a part number.

Elbow with Lever Handle

NPT Female × Barbed

NPT Male × Barbed

Valve Type: Ball
For Use With: Air, Argon, Helium, Krypton, Neon, Water, Xenon
Seal Material: Buna-N Rubber

Dark Gray PVC Plastic Body
Pipe Size	For Tube ID	Flow Coefficient (Cv)	Max. Pressure	Temperature Range, °F	Port Type	Port-to-Port Lg.		Each
NPT Female × Barbed
1/4	3/8", 1/2", 5/8"	Not Rated	125 psi @ 140° F	35° to 140°	Full	2 1/4"	00000000	00000
3/8	3/8", 1/2", 5/8"	Not Rated	125 psi @ 140° F	35° to 140°	Full	2 1/4"	00000000	0000
NPT Male × Barbed
1/4	3/8", 1/2", 5/8"	Not Rated	125 psi @ 140° F	35° to 140°	Full	2 1/4"	00000000	0000
3/8	3/8", 1/2", 5/8"	Not Rated	125 psi @ 140° F	35° to 140°	Full	2 1/4"	00000000	0000
1/2	1/2"	Not Rated	125 psi @ 140° F	35° to 140°	Standard	1 7/16"	00000000	00000
1/2	3/4"	3.8	125 psi @ 140° F	35° to 140°	Standard	1 7/16"	00000000	00000
3/4	1/2"	Not Rated	125 psi @ 140° F	35° to 140°	Standard	1 7/16"	00000000	00000
3/4	3/4"	3.8	125 psi @ 140° F	35° to 140°	Standard	1 7/16"	00000000	00000

Fast-Acting Panel-Mount On/Off
Valves with Yor-Lok Fittings

90° Elbow

Valve Type: Stem
For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
Seal Material: PTFE Plastic

Flip the toggle to quickly turn these valves on and off. All have threads and a hex nut below the handle for installation in instrument panels. For extra gripping power and a strong seal, they have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

316 stainless steel valves are more corrosion resistant than brass valves.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

					90° Elbow
For Tube OD	Flow Coefficient (Cv)	Max. Pressure	Temperature Range, °F	Panel Cutout Dia.	Port-to-Port Lg.		Each
Brass Body
Yor Lok × Yor Lok
1/4"	0.2	300 psi @ 200° F	-20° to 200°	17/32"	1 1/8"	0000000	000000
316 Stainless Steel Body
Yor Lok × Yor Lok
1/4"	0.2	300 psi @ 200° F	-20° to 200°	17/32"	1 1/8"	0000000	00000

Threaded Solenoid Diverting Valves

For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
Seal Material: Buna-N Rubber

These valves operate on electricity to automatically divert flow between ports. All can direct flow from the center-port inlet to either side-port outlet. Valves cannot shut off flow. They require a minimum pressure drop between the inlet and outlet for operation; the upstream pressure must be 10 psi greater than the downstream pressure. The actuator is directly mounted to the valve body to minimize movement and reduce wear.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

Brass Body with Wire Leads—120V AC
Pipe Size	Flow Pattern	Flow Coefficient (Cv)	Max. Pressure	Pressure Drop	Min. Pressure Drop Required	Temp. Range, °F	Actuation Time	Valve Lg.	O'all Ht.		Each
NPT Female × NPT Female × NPT Female
3/8	L-Pattern	2.1	180 psi @ 165° F	Pressure Drop Assisted	10 psi	35° to 165°	0 sec.	3"	4 7/8"	0000000	0000000
1/2	L-Pattern	3.6	180 psi @ 165° F	Pressure Drop Assisted	10 psi	35° to 165°	0 sec.	3 3/8"	5 1/8"	0000000	000000
3/4	L-Pattern	7.3	180 psi @ 165° F	Pressure Drop Assisted	10 psi	35° to 165°	0 sec.	4 1/4"	6 1/16"	0000000	000000