Shape Shape |
|---|
 |  |
| 90° Elbow | Wye |
 | |
| Double 90° Elbow |
Connection Style Connection Style |
|---|
 |  |
| Threaded | Barbed |
 |  |
| Push to Connect | Yor-Lok |
For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
Body Material Body Material |
|---|
|
|
Valve Function Valve Function |
|---|
|
Actuation Actuation |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
Flow Coefficient (Cv) Flow Coefficient (Cv) |
|---|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Voltage Voltage |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
System of Measurement System of Measurement |
|---|
|
Length Length |
|---|
Overall Height Overall Height |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Actuated On/Off Valves
More
About On/Off Valves
More
About Flow-Adjustment Valves
More
About Precision Flow-Adjustment Valves
More
Threaded Hose Fittings for Compressed Gas
Use these fittings to connect welding hose to pressure regulators and torches. They are also known as CGA (Compressed Gas Association) fittings. Fittings are brass for good corrosion resistance.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
| CGA Number | Trade Size | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | |||||||
|---|---|---|---|---|---|---|---|
| 032 | B | 5/8"-18 | UN/UNF (CGA) | Right Hand | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 0000000 | 000000 |
Threaded Solenoid Diverting Valves
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: Buna-N Rubber
These valves operate on electricity to automatically divert flow between ports. All can direct flow from the center-port inlet to either side-port outlet. Valves cannot shut off flow. They require a minimum pressure drop between the inlet and outlet for operation; the upstream pressure must be 10 psi greater than the downstream pressure. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
| Pipe Size | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Min. Pressure Drop Required | Temp. Range, °F | Actuation Time | Valve Lg. | O'all Ht. | Each | |
Brass Body with Wire Leads—120V AC | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female × NPT Female | |||||||||||
| 3/8 | L-Pattern | 2.1 | 180 psi @ 165° F | Pressure Drop Assisted | 10 psi | 35° to 165° | 0 sec. | 3" | 4 7/8" | 0000000 | 0000000 |
| 1/2 | L-Pattern | 3.6 | 180 psi @ 165° F | Pressure Drop Assisted | 10 psi | 35° to 165° | 0 sec. | 3 3/8" | 5 1/8" | 0000000 | 000000 |
| 3/4 | L-Pattern | 7.3 | 180 psi @ 165° F | Pressure Drop Assisted | 10 psi | 35° to 165° | 0 sec. | 4 1/4" | 6 1/16" | 0000000 | 000000 |
Threaded Flow-Adjustment Valves
These valves gradually open and close to adjust and regulate flow.
Wheel handles open and close with multiple turns, providing more controlled, shock-resistant flow than lever handles.
Rising stems lift as the valve opens and lower as the valve closes to provide a visual indication of whether flow is on or off. The stem is isolated from the process media for a longer service life than valves with a nonrising stem.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Globe
- For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
- Specifications Met: MSS-SP-80
Wheel Handle | |||||||
|---|---|---|---|---|---|---|---|
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port-to-Port Lg. | Stem Type | Each | |
NPT Female × NPT Female—90° Elbow | |||||||
| 1/4 | 1.6 | 200 psi @ 150° F | -20° to 405° | 3/4" | Rising | 0000000 | 000000 |
| 3/8 | 3.1 | 200 psi @ 150° F | -20° to 405° | 15/16" | Rising | 0000000 | 00000 |
| 1/2 | 5.1 | 200 psi @ 150° F | -20° to 405° | 1" | Rising | 0000000 | 00000 |
| 3/4 | 9.2 | 200 psi @ 150° F | -20° to 405° | 1 1/4" | Rising | 0000000 | 00000 |
| 1 | 16 | 200 psi @ 150° F | -20° to 405° | 1 7/16" | Rising | 0000000 | 000000 |
| 1 1/4 | 28 | 200 psi @ 150° F | -20° to 405° | 1 11/16" | Rising | 0000000 | 000000 |
| 1 1/2 | 39 | 200 psi @ 150° F | -20° to 405° | 1 13/16" | Rising | 0000000 | 000000 |
| 2 | 66 | 200 psi @ 150° F | -20° to 405° | 2 3/16" | Rising | 0000000 | 000000 |
- Valve Type: Globe
- For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
- Specifications Met: MSS-SP-80
Wheel Handle | |||||||
|---|---|---|---|---|---|---|---|
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port-to-Port Lg. | Stem Type | Each | |
NPT Female × NPT Female—90° Elbow | |||||||
| 1/4 | 1.6 | 300 psi @ 150° F | -20° to 405° | 1 1/16" | Rising | 0000000 | 000000 |
| 3/8 | 3.1 | 300 psi @ 150° F | -20° to 405° | 1 3/16" | Rising | 0000000 | 00000 |
| 1/2 | 5.1 | 300 psi @ 150° F | -20° to 405° | 1 3/16" | Rising | 0000000 | 00000 |
| 3/4 | 9.2 | 300 psi @ 150° F | -20° to 405° | 1 7/16" | Rising | 0000000 | 00000 |
| 1 | 16 | 300 psi @ 150° F | -20° to 405° | 1 3/4" | Rising | 0000000 | 000000 |
| 1 1/4 | 28 | 300 psi @ 150° F | -20° to 405° | 2 1/16" | Rising | 0000000 | 000000 |
| 1 1/2 | 39 | 300 psi @ 150° F | -20° to 405° | 2 1/4" | Rising | 0000000 | 000000 |
| 2 | 66 | 300 psi @ 150° F | -20° to 405° | 2 3/4" | Rising | 0000000 | 000000 |
- Valve Type: Globe
- For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
- Specifications Met: MSS-SP-80
Wheel Handle | |||||||
|---|---|---|---|---|---|---|---|
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port-to-Port Lg. | Stem Type | Each | |
NPT Female × NPT Female—90° Elbow | |||||||
| 1/4 | 1.6 | 600 psi @ 150° F | -20° to 550° | 1 1/16" | Rising | 0000000 | 000000 |
| 3/8 | 3.1 | 600 psi @ 150° F | -20° to 550° | 1 3/16" | Rising | 0000000 | 00000 |
| 1/2 | 5.1 | 600 psi @ 150° F | -20° to 550° | 1 1/4" | Rising | 0000000 | 00000 |
| 3/4 | 9.2 | 600 psi @ 150° F | -20° to 550° | 1 1/2" | Rising | 0000000 | 000000 |
| 1 | 16 | 600 psi @ 150° F | -20° to 550° | 1 3/4" | Rising | 0000000 | 000000 |
| 1 1/4 | 28 | 600 psi @ 150° F | -20° to 550° | 2 1/16" | Rising | 0000000 | 000000 |
| 1 1/2 | 39 | 600 psi @ 150° F | -20° to 550° | 2 1/4" | Rising | 0000000 | 000000 |
| 2 | 66 | 600 psi @ 150° F | -20° to 550° | 2 3/4" | Rising | 0000000 | 000000 |
High-Pressure Threaded Precision
Flow-Adjustment Valves
Often used in hydraulic and compressed air systems, these valves can withstand at least 6,000 psi. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control.
Metal-to-metal seats resist temperature fluctuations.
Valves with packing have a nut that can be tightened to compress the packing if it leaks.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Needle
- For Use With: See table
Valves | Mounting Nuts | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Packing Material | Port-to-Port Lg. | For Use With | Each | Pair | |||
NPT Female × NPT Female | |||||||||||
| E | 1/8 | 0.7 | 10000 psi @ 100° F | -20° to 500° | PTFE Plastic | 1" | Oil, Air, Argon, Helium, Krypton, Neon, Xenon | 0000000 | 000000 | 0000000 | 000000 |
| E | 1/4 | 0.8 | 10000 psi @ 100° F | -20° to 500° | PTFE Plastic | 1" | Oil, Air, Argon, Helium, Krypton, Neon, Xenon | 0000000 | 00000 | 0000000 | 00000 |
| E | 3/8 | 1.6 | 10000 psi @ 100° F | -20° to 500° | PTFE Plastic | 1 11/16" | Oil, Air, Argon, Helium, Krypton, Neon, Xenon | 0000000 | 00000 | 0000000 | 00000 |
| E | 1/2 | 1.5 | 10000 psi @ 100° F | -20° to 500° | PTFE Plastic | 1 11/16" | Oil, Air, Argon, Helium, Krypton, Neon, Xenon | 0000000 | 00000 | 0000000 | 00000 |
| E | 3/4 | 4.4 | 10000 psi @ 100° F | -20° to 500° | PTFE Plastic | 2" | Oil, Air, Argon, Helium, Krypton, Neon, Xenon | 0000000 | 000000 | 0000000 | 00000 |
NPT Male × NPT Female | |||||||||||
| F | 1/4 | 0.6 | 10000 psi @ 100° F | -20° to 500° | PTFE Plastic | 1" | Oil, Air, Argon, Helium, Krypton, Neon, Xenon | 0000000 | 00000 | 0000000 | 00000 |
| F | 1/2 | 1.5 | 10000 psi @ 100° F | -20° to 500° | PTFE Plastic | 1 11/16" | Oil, Air, Argon, Helium, Krypton, Neon, Xenon | 0000000 | 00000 | 0000000 | 00000 |
Threaded Precision Flow-Adjustment Valves
Also known as needle valves, these adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Turn the handle to adjust flow. All valves have metal-to-metal seats that resist temperature fluctuations.
303 stainless steel valves are more corrosion resistant than brass and steel valves.
316 stainless steel valves have the best corrosion resistance.
Valves with packing have a nut that can be tightened to compress the packing if it leaks.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Needle
- For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
| Thread Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Packing Material | Port-to-Port Lg. | Each | |
303 Stainless Steel Body with Knob Handle | |||||||
|---|---|---|---|---|---|---|---|
| 10-32 | 0.02 | 300 psi @ 70° F | 0° to 430° | Fluoroelastomer Rubber | 5/16" | 00000000 | 000000 |
316 Stainless Steel Body with Knob Handle | |||||||
| 10-32 | 0.02 | 300 psi @ 70° F | 0° to 430° | Fluoroelastomer Rubber | 5/16" | 00000000 | 00000 |
Panel-Mount Threaded Precision Flow-Adjustment Valves
- Valve Type: Needle
- For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
For installation in instrument panels, these valves have a hex nut and threads below the handle. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. All valves have metal-to-metal seats that resist temperature fluctuations. They have a nut that can be tightened to compress the packing if it leaks.
Nickel-plated brass valves are more corrosion resistant than plain brass valves.
Valves with a 303 stainless steel needle are more corrosion resistant than valves with a brass needle.
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Panel Cutout Dia. | Body Material | Needle Material | Port-to-Port Lg. | Each | |
Brass Body—90° Elbow | |||||||||
|---|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||||
| 1/4 | 0.6 | 500 psi @ 180° F | -20° to 180° | 9/16" | Brass | 303 Stainless Steel | 15/16" | 0000000 | 000000 |
| 1/4 | 0.6 | 500 psi @ 180° F | -20° to 180° | 9/16" | Brass | Brass | 15/16" | 0000000 | 00000 |
NPT Female × NPT Male | |||||||||
| 1/4 | 0.6 | 500 psi @ 180° F | -20° to 180° | 9/16" | Brass | 303 Stainless Steel | 15/16" | 0000000 | 00000 |
| 1/4 | 0.6 | 500 psi @ 180° F | -20° to 180° | 9/16" | Brass | Brass | 15/16" | 0000000 | 00000 |
Nickel-Plated Brass Body—90° Elbow | |||||||||
NPT Female × NPT Female | |||||||||
| 1/4 | 0.6 | 500 psi @ 180° F | -20° to 180° | 9/16" | Nickel-Plated Brass | 303 Stainless Steel | 15/16" | 00000000 | 00000 |
| 1/4 | 0.6 | 500 psi @ 180° F | -20° to 180° | 9/16" | Nickel-Plated Brass | Brass | 15/16" | 00000000 | 00000 |
NPT Female × NPT Male | |||||||||
| 1/4 | 0.6 | 500 psi @ 180° F | -20° to 180° | 9/16" | Nickel-Plated Brass | 303 Stainless Steel | 15/16" | 00000000 | 00000 |
| 1/4 | 0.6 | 500 psi @ 180° F | -20° to 180° | 9/16" | Nickel-Plated Brass | Brass | 15/16" | 00000000 | 00000 |
Compact Precision Flow-Adjustment
Valves with Barbed Fittings
- Valve Type: Needle
- For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
- Seal Material: Buna-N Rubber
With a low-profile body and a narrow port-to-port length, these valves fit in tight spots. Barbs grip onto tubing, providing a secure hold. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Valves have metal-to-metal seats that resist temperature fluctuations.
Screwdriver-operated valves require a slotted screwdriver (not included) to open and close.
303 stainless steel valves are more corrosion resistant than nickel-plated brass valves.
| For Tube ID | Max. Pressure | Temperature Range, °F | Panel Cutout Dia. | Port-to-Port Lg. | Each | |
Handle-Operated | ||||||
|---|---|---|---|---|---|---|
Nickel-Plated Brass Body | ||||||
Barbed × Barbed | ||||||
| 1/16" | 180 psi @ 150° F | -40° to 200° | 5/16" | 7/16" | 00000000 | 000000 |
303 Stainless Steel Body | ||||||
Barbed × Barbed | ||||||
| 1/8" | 180 psi @ 150° F | -40° to 200° | 5/16" | 9/16" | 00000000 | 00000 |
Screwdriver-Operated | ||||||
Nickel-Plated Brass Body | ||||||
Barbed × Barbed | ||||||
| 1/16" | 180 psi @ 150° F | -40° to 200° | 5/16" | 7/16" | 00000000 | 00000 |
303 Stainless Steel Body | ||||||
Barbed × Barbed | ||||||
| 1/8" | 180 psi @ 150° F | -40° to 200° | 5/16" | 9/16" | 00000000 | 00000 |
Panel-Mount Threaded On/Off Valves
For installation in instrument panels, these valves have threads and a hex nut below the handle.
Full-port valves do not restrict flow.
Standard-port valves slightly restrict flow.
316 stainless steel valves are more corrosion resistant than brass valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With:
316 Stainless Steel: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon, Steam
Brass: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon - Seal Material:
316 Stainless Steel: PTFE Plastic
Brass: Fluoroelastomer Rubber
| Pipe Size | Gender | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | Port Type | Port-to-Port Lg. | Panel Cutout Dia. | Each | |
316 Stainless Steel Body | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
NPT Female—NPT Female | ||||||||||
| 1/8 | Female; Female | 0.3 | 3000 psi @ 70° F | -30° to 295° | 29 | Standard | 13/16" | 19/32" | 00000000 | 000000 |
| 1/4 | Female; Female | 0.8 | 3000 psi @ 70° F | -30° to 295° | 29 | Standard | 1" | 25/32" | 00000000 | 000000 |
Brass Body | ||||||||||
NPT Female—NPT Female | ||||||||||
| 1/8 | Female; Female | 1.4 | 1500 psi @ 70° F | -30° to 295° | 29 | Full | 15/16" | 9/16" | 0000000 | 00000 |
| 1/4 | Female; Female | 1.6 | 1500 psi @ 70° F | -30° to 295° | 29 | Full | 15/16" | 9/16" | 0000000 | 00000 |
| 3/8 | Female; Female | 2.7 | 600 psi @ 70° F | -30° to 295° | 29 | Standard | 1 1/8" | 9/16" | 0000000 | 00000 |
| 1/2 | Female; Female | 2.7 | 600 psi @ 70° F | -30° to 295° | 29 | Standard | 1 3/16" | 9/16" | 0000000 | 00000 |
NPT Male—NPT Female | ||||||||||
| 1/4 | Male; Female | 1.6 | 1500 psi @ 70° F | -30° to 295° | 29 | Standard | 13/16" | 9/16" | 00000000 | 00000 |
NPT Male—NPT Male | ||||||||||
| 1/8 | Male; Male | 1.4 | 1500 psi @ 70° F | -30° to 295° | 29 | Full | 1" | 9/16" | 0000000 | 00000 |
| 1/4 | Male; Male | 1.6 | 1500 psi @ 70° F | -30° to 295° | 29 | Full | 1" | 9/16" | 0000000 | 00000 |
| 3/8 | Male; Male | 2.7 | 600 psi @ 70° F | -30° to 295° | 29 | Standard | 1 1/16" | 9/16" | 0000000 | 00000 |
| 1/2 | Male; Male | 2.7 | 600 psi @ 70° F | -30° to 295° | 29 | Standard | 1 5/16" | 9/16" | 0000000 | 00000 |
Fast-Acting Panel-Mount Threaded On/Off Valves
Open and close these valves with the flip of the toggle switch. Commonly used for equipment testing and gas sampling, they have threads and a hex nut below the handle for installation in instrument panels.
316 stainless steel valves are more corrosion resistant than brass valves.
Manual-return valves remain open or closed when the toggle is moved into position.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Stem
- For Use With:
Buna-N Rubber Seal: Water, Oil, Air
All Other Valves: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Toggle Switch Type | Port-to-Port Lg. | Panel Cutout Dia. | Each | |
Brass Body—Fluoroelastomer Rubber Seal | ||||||||
|---|---|---|---|---|---|---|---|---|
NPTF Female × NPTF Female | ||||||||
| 1/8 | 0.3 | 200 psi @ 70° F | -15° to 250° | Manual Return | 3/4" | 9/16" | 0000000 | 000000 |
| 1/4 | 1.2 | 125 psi @ 70° F | -15° to 250° | Manual Return | 3/4" | 9/16" | 0000000 | 00000 |
Brass Body—PTFE Plastic Seal | ||||||||
NPT Male × NPT Male | ||||||||
| 1/4 | 0.2 | 300 psi @ 200° F | -20° to 200° | Manual Return | 1" | 17/32" | 0000000 | 00000 |
316 Stainless Steel Body—PTFE Plastic Seal | ||||||||
NPT Male × NPT Male | ||||||||
| 1/4 | 0.2 | 300 psi @ 200° F | -20° to 200° | Manual Return | 1" | 17/32" | 0000000 | 00000 |
Plastic Threaded On/Off Valves
T-handles resist accidental movement when snagged or bumped.
Full-port valves do not restrict flow.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Ball
- For Use With: Air, Argon, Helium, Krypton, Neon, Water, Xenon
- Seal Material: Buna-N Rubber
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
Dark Gray PVC Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||
| 1/4 | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/16" | 00000000 | 00000 |
| 3/8 | 2.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 3/16" | 00000000 | 0000 |
NPT Female × NPT Male | |||||||
| 1/4 | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 00000000 | 0000 |
| 1/2 | 3.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/16" | 00000000 | 00000 |
| 3/8 | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/16" | 00000000 | 0000 |
NPT Male × NPT Female | |||||||
| 3/4 | 3.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 7/16" | 00000000 | 00000 |
NPT Male × NPT Male | |||||||
| 1/2 | 3.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/16" | 00000000 | 00000 |
| 3/4 | 3.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/16" | 00000000 | 00000 |
On/Off Valves with Push-to-Connect Fittings
Insert tubing into the fittings on these valves—no heat, solder, or flux required.
Full-port valves do not restrict flow.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: See table
- For Use With: Air, Argon, Helium, Krypton, Neon, Water, Xenon
- Seal Material: EPDM Rubber
| Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
Dark Gray PVC Plastic Body—Ball Valve Type | ||||||||
|---|---|---|---|---|---|---|---|---|
Push to Connect × Push to Connect | ||||||||
| __ | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 7/16" | 0000000 | 000000 |
| __ | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 7/16" | 0000000 | 00000 |
| __ | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 7/16" | 0000000 | 00000 |
NPT Female × Push to Connect | ||||||||
| 1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 7/16" | 0000000 | 00000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 7/16" | 0000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 7/16" | 0000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 7/16" | 0000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 7/16" | 0000000 | 00000 |
| 1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 7/16" | 0000000 | 00000 |
Dark Gray PVC Plastic Body—Plug Valve Type | ||||||||
NPT Female × Push to Connect | ||||||||
| 1/4 | 1/4" | 1.1 | 125 psi @ 70° F | 35° to 140° | Standard | 1 1/4" | 0000000 | 0000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 70° F | 35° to 140° | Standard | 1 1/4" | 0000000 | 0000 |
White Polypropylene Plastic Body—Plug Valve Type | ||||||||
NPT Female × Push to Connect | ||||||||
| 1/4 | 1/4" | 1.1 | 125 psi @ 70° F | 35° to 140° | Standard | 1 1/4" | 0000000 | 0000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 70° F | 35° to 140° | Standard | 1 1/4" | 0000000 | 0000 |
Plastic On/Off Valves with Barbed Fittings
Barbs grip onto tubing, providing a secure hold.
Full-port valves do not restrict flow.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Ball
- For Use With: Air, Argon, Helium, Krypton, Neon, Water, Xenon
- Seal Material: Buna-N Rubber
| Pipe Size | For Tube ID | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
Dark Gray PVC Plastic Body | ||||||||
|---|---|---|---|---|---|---|---|---|
NPT Female × Barbed | ||||||||
| 1/4 | 3/8", 1/2", 5/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 2 1/4" | 00000000 | 00000 |
| 3/8 | 3/8", 1/2", 5/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 2 1/4" | 00000000 | 0000 |
NPT Male × Barbed | ||||||||
| 1/4 | 3/8", 1/2", 5/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 2 1/4" | 00000000 | 0000 |
| 3/8 | 3/8", 1/2", 5/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 2 1/4" | 00000000 | 0000 |
| 1/2 | 1/2" | 3.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 7/16" | 00000000 | 00000 |
| 1/2 | 3/4" | 3.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 7/16" | 00000000 | 00000 |
| 3/4 | 1/2" | 3.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 7/16" | 00000000 | 00000 |
| 3/4 | 3/4" | 3.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 7/16" | 00000000 | 00000 |
Fast-Acting Panel-Mount On/Off
Valves with Yor-Lok Fittings
- Valve Type: Stem
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: PTFE Plastic
Flip the toggle to quickly turn these valves on and off. All have threads and a hex nut below the handle for installation in instrument panels. For extra gripping power and a strong seal, they have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.
316 stainless steel valves are more corrosion resistant than brass valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.