Propel liquid higher and farther than standard high-efficiency circulation pumps. These pumps use less electricity to achieve the same flow rates as other circulation pumps.

These pumps can be used to move water and lubricating oil in boiler feed systems, cooling towers, and heat exchangers.

Pump fuel and flammable liquids, such as isopropyl alcohol and xylene. These pumps are rated for environments where hazardous material is present.

Commonly used in food, beverage, and dairy processing, these pumps are 3-A certified to meet sanitary design standards.

Pump oil with a viscosity similar to SAE 10 motor oil. Also known as gear pumps, these produce a smooth flow of liquid for applications such as cooling engines, powering hydraulic equipment, and extracting liquid from holding tanks.

An aluminum enclosure around the motor provides protection in dusty and dirty environments. Designed to fit into small equipment, these pumps have miniature gears and a subfractional horsepower motor for low-flow applications.

Use these pumps to move lubricating oil such as hydraulic and motor oil. Also known as flexible impeller pumps, they create a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump.

For high-volume chemical sampling and draining, these pumps have a powerful motor that enables them to move 2,448 gallons of liquid per day.

Control the flow of oil to a single lubrication point.

A solenoid automatically starts and stops flow to a single lubrication point to dispense lubricant while equipment is running.

With a maximum flow of 0.005 oz. per cycle, these pumps deliver small, precise amounts of oil. Turn the dial to set the cycle interval.

Designed to recycle oil, this system dispenses, collects, and filters oil for reuse. It delivers a controlled flow at a specific interval.