Plug Type Plug Type |
|---|
|
Maximum No-Load Speed Maximum No-Load Speed |
|---|
|
|
Load Capacity Load Capacity |
|---|
|
|
Material Material |
|---|
|
Swirl-Free Polishers
Eliminate swirl marks without damaging painted surfaces. Also known as a random-orbital polisher. The counterbalanced bottom plate reduces vibration.
| For Bonnet Dia. | Max. No-Load Speed | Wt., lbs. | Control Type | Current (Voltage) | Plug Type | Includes | Each | |
One Speed | ||||||||
|---|---|---|---|---|---|---|---|---|
| 10" | 3,200 orbits/min. | 9 | On/Off Switch | 0.8A (120V AC) | Two Prong | Two Terry Cloth Polishing Bonnets Two Terry Cloth Applicator Bonnets Two Polyester Polishing Bonnets One Polyester Wash Mitt | 000000 | 000000 |
Electric Buffer/Polishers
Hold one buffing or polishing wheel on each spindle.
Wheel guards (sold separately) protect your work area from flying debris. Guard for 8" buffing wheel diameter includes a right side and a left side wheel guard.
For Buffing Wheel | Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arbor Hole Dia. | Dia. | Thick. | Max. No-Load Speed, rpm | Power, hp | Motor Shaft Dia. | Lg. | Wd. | Ht. | Wt., lbs. | Control Type | Current (Voltage) | Plug Type | Each | |
| 1/2" | 6" | 1/4"-1" | 1,800 | 1/4 | 1/2" | 18 1/2" | 10" | 10 1/2" | 17 | On/Off Switch | 2.8A (120V AC) | Three Prong | 000000 | 0000000 |
| 1/2" | 6" | 1/2"-3/4" | 3,600 | 1/3 | 1/2" | 19" | 7 3/4" | 9 3/4" | 25 | On/Off Switch | 4.2A (120V AC) | Three Prong | 0000000 | 000000 |
| 3/4" | 8" | 3/8"-1 1/4" | 3,600 | 3/4 | 3/4" | 28 1/2" | 8 1/2" | 11 1/2" | 56 | On/Off Switch | 2.4A (240V AC) 4.8A (120V AC) | Three Prong | 0000000 | 000000 |
Base | ||||||
|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Wt., lbs. | Material | Each | |
| 32 7/8" | 15 3/4" | 14" | 62 | Iron | 000000 | 0000000 |
| For Buffing Wheel Dia. | Exhaust Vent Dia. | Material | For Buffer Shaft Location | Includes | Each | |
| 6" | 4" | Steel | Right Side and Left Side | Left & Right Wheel Guard, Mounting Fasteners, Mounting Hardware | 0000000 | 0000000 |
| 8" | 4" | Steel | Right Side and Left Side | Left & Right Wheel Guard, Mounting Fasteners, Mounting Hardware | 0000000 | 000000 |
Electric Buffer/Grinders
Use one wheel for buffing and the other wheel for occasional tool cleaning, sharpening, and touch-up work.
For Buffing Wheel | For Grinding Wheel | No-Load Speed, rpm | Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Arbor Hole Dia. | Max. Dia. | Arbor Hole Dia. | Max. Dia. | Max. Thick. | Min. | Max. | Power, hp | Motor Shaft Dia. | Lg. | Wd. | Ht. | Wt., lbs. | Control Type | Current (Voltage) | Plug Type | Includes | Each | |
Variable Speed | ||||||||||||||||||
| 3/8" | 4" | 1/4" | 2" | 3/4" | 500 | 7,000 | 1/6 | 5/16" | 13" | 5" | 5 1/8" | 8 | Dial | 1.8A (120V AC) | Three Prong | Tapered Spindle for Buffing Wheels 3" Diameter Buffing Wheel Wheel Arbor for Grinding Wheels 1 3/4" Diameter Grinding Wheel | 000000 | 0000000 |
Electric Angle Polishers
Attach polishing bonnets to the included backup pad or attach buffing wheels with a threaded arbor hole directly to the threaded spindle. The two-position side handle allows left- and right-hand operation.
Polishing Bonnets
These bonnets won’t leave swirl marks or scratches when polishing waxed surfaces. Attach to the backup pad on your portable polishing tool. Order a bonnet one size larger than your pad.
Applicator Bonnets
Before you buff, use these bonnets for easy application of waxes and polishes. Attach to the backup pad on your portable polishing tool. Order a bonnet one size larger than your pad.
| Dia. | Max. Speed, rpm | For Surface Type | Pkg. Qty. | Pkg. | |
Terry Cloth with Elastic Mount | |||||
|---|---|---|---|---|---|
| 10" | 3,200 | Flat | 2 | 0000000 | 00000 |
Vibrating Machines
Keep parts in constant motion for faster finishing than tumbling machines. Fill with media and run wet or dry to finish multiple parts at the same time. These machines can be filled to 100% capacity.
Bowl | Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Load Cap., lbs. | Cap., cu. ft. | Inside Dia. | Inside Ht. | Material | Dia. | Ht. | hp | Current, A | Cord Lg., ft. | Vibration Setting Type | Control Type | Wt., lbs. | Each | |
For Ceramic, Corn Cob, Plastic, Porcelain, Steel, and Walnut Shells | ||||||||||||||
120V AC—Three-Prong Plug | ||||||||||||||
| 10 | 0.1 | 10" | 4" | Plastic | 10" | 11" | 1/30 | 1.1 | 6 | Fixed | Switch | 8 | 00000000 | 0000000 |
| 18 | 0.2 | 12" | 4 1/2" | Plastic | 12" | 12 1/2" | 1/20 | 1.6 | 6 | Fixed | Switch | 15 | 00000000 | 000000 |
| 57 | 0.6 | 17" | 6" | Plastic | 17" | 18" | 1/20 | 1.6 | 6 | Adjustable | Switch | 23 | 00000000 | 000000 |
240V AC—Three-Prong Plug | ||||||||||||||
| 18 | 0.2 | 12" | 4 1/2" | Plastic | 12" | 15" | 1/20 | 0.7 | 6 | Fixed | Switch | 15 | 00000000 | 000000 |
Heavy Duty Vibrating Machines
The thick bowl can handle steel media and heavy loads. These machines keep parts in constant motion for faster finishing than tumbling machines. The clear lid lets you see work in progress and the drain makes cleanup easier. Fill with media and run wet or dry to finish multiple parts at the same time. Machines can be filled to 100% capacity.
Bowl | Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Media Material (Load Capacity) | Cap., cu. ft. | Inside Dia. | Inside Ht. | Material | Dia. | Ht. | hp | Current, A | Cord Lg., ft. | Vibration Setting Type | Control Type | Wt., lbs. | Each | |
120V AC—Three-Prong Plug | ||||||||||||||
| Steel (120 lbs.) Ceramic (50 lbs.) Corn Cob, Plastic, Porcelain, Walnut Shells (Not Rated) | 0.25 | 14" | 6" | Plastic | 14" | 20" | 1/4 | 5 | 5 | Adjustable | Timer | 38 | 00000000 | 000000000 |
| Steel (230 lbs.) Ceramic (90 lbs.) Corn Cob, Plastic, Porcelain, Walnut Shells (Not Rated) | 0.5 | 17" | 7 1/2" | Plastic | 17" | 22" | 1/3 | 5.9 | 5 | Adjustable | Timer | 45 | 00000000 | 00000000 |
| Steel (340 lbs.) Ceramic (150 lbs.) Corn Cob, Plastic, Porcelain, Walnut Shells (Not Rated) | 1 | 20" | 9" | Plastic | 20" | 24" | 1/2 | 8.8 | 5 | Adjustable | Timer | 63 | 00000000 | 00000000 |
Tumbling Machines
The rotating motion of these machines aggressively deburrs and polishes. Fill with media to maximum of 60% capacity and run wet or dry to finish multiple parts at the same time.
Tumbling Machines | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Barrel | Overall | Replacement Barrels | Replacement Belts | |||||||||||||||||
| Load Cap., lbs. | Cap., cu. ft. | No. of | Inside Dia. | Inside Dp. | Material | Speed, rpm | Ht. | Wd. | Dp. | hp | Current, A | Cord Lg., ft. | Control Type | Wt., lbs. | Each | Each | Each | |||
For Ceramic, Corn Cob, Plastic, Porcelain, Steel, and Walnut Shells | ||||||||||||||||||||
120V AC—Two-Prong Plug | ||||||||||||||||||||
| 3 | 0.033 | 1 | 4 1/4" | 4" | Rubber | 32-36 | 7 1/2" | 6" | 8 1/2" | 1/75 | 0.5 | 4 | Plug | 4 | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 00000 |
| 6 | 0.067 | 2 | 4 1/4" | 4" | Rubber | 32-36 | 7 1/2" | 11" | 6" | 1/75 | 0.5 | 4 | Plug | 6 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 |
| 9 | 0.1 | 1 | 7" | 4" | Rubber | 24-28 | 10" | 6" | 11" | 1/75 | 0.5 | 4 | Plug | 6 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 |
| 15 | 0.167 | 1 | 7" | 8" | Rubber | 20-22 | 11 1/2" | 11" | 11" | 1/50 | 0.8 | 4 | Plug | 13 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 0000 |
Heavy Duty Tumbling Machines
Use for large, heavy loads. The rotating motion of these machines aggressively deburrs and polishes. Fill with media to maximum of 75% capacity and run wet or dry to finish multiple parts at the same time.
Tumbling Machines | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Barrel | Overall | Replacement Barrels | |||||||||||||||||
| Load Cap., lbs. | Cap., cu. ft. | No. of | Inside Dia. | Inside Dp. | Material | Lining Material | Speed, rpm | Ht. | Wd. | Dp. | hp | Current, A | Cord Lg., ft. | Control Type | Wt., lbs. | Each | Each | ||
For Ceramic, Corn Cob, Plastic, Porcelain, Steel, and Walnut Shells | |||||||||||||||||||
120V AC—Three-Prong Plug | |||||||||||||||||||
| 20 | 0.2 | 1 | 7 1/2" | 7" | Steel | Rubber | 34 | 18" | 16" | 18" | 1/6 | 2.8 | 7 | Switch | 58 | 0000000 | 0000000 | 0000000 | 0000000 |
| 40 | 0.48 | 1 | 9" | 11 7/8" | Steel | Rubber | 34 | 18" | 28" | 18" | 1/6 | 2.8 | 7 | Switch | 78 | 0000000 | 000000 | 0000000 | 000000 |
Compact Swing-Style Floor Buffer/Scrubbers
This cleaner gets into tight spots, such as corners and behind toilets. It can also be used to clean baseboards and stairs.
The included baseboard brush has silicon-carbide-impregnated plastic bristles for aggressive cleaning.
Handle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Base Dia. | Brush/Pad Speed, rpm | Current, A | Voltage | hp | Lg. | Material | Motor Housing Material | Cord Lg., ft. | Includes | Each | |
| 6" | 765 | 1.7 | 120V AC | 1/8 | 42" | Plastic | Aluminum | 1/2 | 6" Dia. Baseboard Brush 6" Dia. Pad Holder with Plastic Block | 00000000 | 0000000 |
Swing-Style Floor Buffer/Scrubbers
Scrub, strip, buff, or polish floors. These buffer/scrubbers are suitable for wet and dry applications on hard floors and carpet.
The adjustable handle moves to different angles for comfort. Handle has a trigger to ensure safe operation—machine stops when the trigger is released. The wraparound bumper is nonmarking.
Pads or brushes are required and sold separately. If using a pad, 175/300 rpm machines require a pad holder, also sold separately.
Handle | Wheels | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Base Dia. | Brush/Pad Speed, rpm | Current, A | Voltage | hp | Lg. | Material | No. of | Dia. | Cord Lg., ft. | Includes | Each | |
| 17" | 175 | 15 | 120V AC | 1 1/2 | 38" | Steel | 2 | 5" | 50 | Pad Holder | 0000000 | 0000000 |
| 17" | 175/300 | 15 | 120V AC | 1 1/2 | 38" | Steel | 2 | 5" | 50 | __ | 0000000 | 00000000 |
| 20" | 175/300 | 15 | 120V AC | 1 1/2 | 38" | Steel | 2 | 5" | 50 | __ | 0000000 | 00000000 |
| Optional 4-Gallon Plastic Solution Tank | 0000000 | Each | 0000000 |
High-Speed Floor Burnishers
Polish hard floors to a high-gloss finish.
The adjustable handle moves to different angles for comfort. Handle has a trigger to ensure safe operation—burnisher stops when the trigger is released. The wraparound bumper is nonmarking.
Two wheels are for transporting the burnisher; two are operating wheels.
Use only with pads (not included). The included pad holder is flexible to conform to uneven floors.
Handle | Wheel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Base Dia. | Brush/Pad Speed, rpm | Current, A | Voltage | hp | Lg. | Material | No. of | Dia. | Cord Lg., ft. | Includes | Each | |
| 20" | 1,500 | 15 | 120V AC | 1 1/2 | 38" | Steel | 4 | 5" | 50 | Pad Holder | 000000 | 000000000 |