Electric Relay Contactors

Filter by

Input Voltage

Switching Current

Electrical Phase

Number of Circuits Controlled

Mounting Location

DIN Rail

Surface

Horsepower @ Switching Voltage

Switching Voltage

Switch Designation

Number of Terminals

Load Type

Full

Resistive

Wire Connection

Quick-Disconnect Terminal

Operation Type

Auxiliary Contact Switch Starting Position

1 Off

1 On

Switch Starting Position

Certification

UL Recognized Component

Depth

Control Power

Number of Mounting Holes

Width

Export Control Classification Number (ECCN)

REACH

RoHS

Compliant with Exemptions

Not Compliant

DFARS Specialty Metals

Height

Mechanical Life Cycles

Mounting Hole Diameter

101 Products

DIN-Rail Mount Touch-Safe Screw Terminal Relays

Quickly and safely mount these relays on 35 mm DIN rail (also known as DIN 3). IP20 rated, they have recessed terminals that prevent fingers and other objects from touching live circuits.

Relays that control 3 and 4 circuits are built to IEC dimensional standards and are often called IEC contactors. Those with 12 terminals let you attach the control circuit onto the side that works best for your setup, which reduces the amount of wire you need.

Auxiliary contacts (sold separately) allow you to add a signaling device or control another relay. You can add one auxiliary contact to all of these relays. For relays with 12 terminals, you can add two side-mount auxiliary contacts.

Use replacement coils to swap out a broken coil or change the input voltage of a relay. They are only compatible with relays that have 12 terminals. The full load current of the relay must match the full load current range of the coil.

Relay

		Control				hp @ Switching Voltage
Number of Terminals	Input Voltage	Power	Current, mA	Switching Current @ Voltage (Load Type)	Max. Switching Voltage	Single Phase	Three Phase	Ht.	Wd.	Dp.		Each
3 Circuits Controlled with 3 Off (Normally Open)—3PST-NO
With 1 Auxiliary Contact—1 Off (Normally Open)
10	24V AC	4VA	__	6 A @ 600 V AC (Full Load) 20 A @ 600 V AC (Resistive Load)	600 V AC	1 1/2 hp @ 240 V AC 1/2 hp @ 120 V AC	3 hp @ 240 V AC 5 hp @ 480 V AC 5 hp @ 600 V AC	2.3"	1.7"	2.2"	000000000	000000
10	120V AC	4VA	__	6 A @ 600 V AC (Full Load) 20 A @ 600 V AC (Resistive Load)	600 V AC	1 1/2 hp @ 240 V AC 1/2 hp @ 120 V AC	3 hp @ 240 V AC 5 hp @ 480 V AC 5 hp @ 600 V AC	2.3"	1.7"	2.2"	000000000	00000
10	240V AC	4VA	__	6 A @ 600 V AC (Full Load) 20 A @ 600 V AC (Resistive Load)	600 V AC	1 1/2 hp @ 240 V AC 1/2 hp @ 120 V AC	3 hp @ 240 V AC 5 hp @ 480 V AC 5 hp @ 600 V AC	2.3"	1.7"	2.2"	000000000	00000
10	24V DC	3.2W	__	6 A @ 600 V AC (Full Load) 20 A @ 600 V AC (Resistive Load)	600 V AC	1 1/2 hp @ 240 V AC 1/2 hp @ 120 V AC	3 hp @ 240 V AC 5 hp @ 480 V AC 5 hp @ 600 V AC	2.3"	1.7"	2.2"	00000000	00000
12	24V AC	6.5VA	__	11 A @ 600 V AC (Full Load) 28 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 2 hp @ 240 V AC	5 hp @ 240 V AC 7 1/2 hp @ 480 V AC 10 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	24V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	24V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	2 hp @ 120 V AC 3 hp @ 240 V AC	7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	000000
12	120V AC	6.5VA	__	11 A @ 600 V AC (Full Load) 28 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 2 hp @ 240 V AC	5 hp @ 240 V AC 7 1/2 hp @ 480 V AC 10 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	120V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	120V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	2 hp @ 120 V AC 3 hp @ 240 V AC	7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	000000
12	240V AC	6.5VA	__	11 A @ 600 V AC (Full Load) 28 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 2 hp @ 240 V AC	5 hp @ 240 V AC 7 1/2 hp @ 480 V AC 10 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	240V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	240V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	2 hp @ 120 V AC 3 hp @ 240 V AC	7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	000000
12	24V DC	5.4W	__	11 A @ 600 V AC (Full Load) 28 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 2 hp @ 240 V AC	5 hp @ 240 V AC 7 1/2 hp @ 480 V AC 10 hp @ 600 V AC	3.2"	1.8"	3.9"	00000000	000000
12	24V DC	5.4W	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.9"	00000000	000000
12	24V DC	5.4W	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	2 hp @ 120 V AC 3 hp @ 240 V AC	7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.9"	00000000	000000
With 1 Auxiliary Contact—1 On (Normally Closed)
10	24V AC	4VA	__	6 A @ 600 V AC (Full Load) 20 A @ 600 V AC (Resistive Load)	600 V AC	1 1/2 hp @ 240 V AC 1/2 hp @ 120 V AC	3 hp @ 240 V AC 5 hp @ 480 V AC 5 hp @ 600 V AC	2.3"	1.7"	2.2"	000000000	00000
10	120V AC	4VA	__	6 A @ 600 V AC (Full Load) 20 A @ 600 V AC (Resistive Load)	600 V AC	1 1/2 hp @ 240 V AC 1/2 hp @ 120 V AC	3 hp @ 240 V AC 5 hp @ 480 V AC 5 hp @ 600 V AC	2.3"	1.7"	2.2"	000000000	00000
10	240V AC	4VA	__	6 A @ 600 V AC (Full Load) 20 A @ 600 V AC (Resistive Load)	600 V AC	1 1/2 hp @ 240 V AC 1/2 hp @ 120 V AC	3 hp @ 240 V AC 5 hp @ 480 V AC 5 hp @ 600 V AC	2.3"	1.7"	2.2"	000000000	00000
10	24V DC	3.2W	__	6 A @ 600 V AC (Full Load) 20 A @ 600 V AC (Resistive Load)	600 V AC	1 1/2 hp @ 240 V AC 1/2 hp @ 120 V AC	3 hp @ 240 V AC 5 hp @ 480 V AC 5 hp @ 600 V AC	2.3"	1.7"	2.2"	00000000	00000
12	24V AC	6.5VA	__	11 A @ 600 V AC (Full Load) 28 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 2 hp @ 240 V AC	5 hp @ 240 V AC 7 1/2 hp @ 480 V AC 10 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	24V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	24V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	2 hp @ 120 V AC 3 hp @ 240 V AC	7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	000000
12	120V AC	6.5VA	__	11 A @ 600 V AC (Full Load) 28 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 2 hp @ 240 V AC	5 hp @ 240 V AC 7 1/2 hp @ 480 V AC 10 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	120V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	120V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	2 hp @ 120 V AC 3 hp @ 240 V AC	7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	000000
12	240V AC	6.5VA	__	11 A @ 600 V AC (Full Load) 28 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 2 hp @ 240 V AC	5 hp @ 240 V AC 7 1/2 hp @ 480 V AC 10 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	240V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	240V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	2 hp @ 120 V AC 3 hp @ 240 V AC	7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	000000
12	24V DC	5.4W	__	11 A @ 600 V AC (Full Load) 28 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 2 hp @ 240 V AC	5 hp @ 240 V AC 7 1/2 hp @ 480 V AC 10 hp @ 600 V AC	3.2"	1.8"	3.9"	00000000	000000
12	24V DC	5.4W	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.9"	00000000	000000
12	24V DC	5.4W	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	2 hp @ 120 V AC 3 hp @ 240 V AC	7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.9"	00000000	000000
4 Circuits Controlled with 4 Off (Normally Open)—4PST-NO
10	24V DC	__	133	10 A @ 600 V AC	600 V AC	__	__	2.3"	1.7"	2.2"	0000000	000000
12	24V AC	6.5VA	__	9 A @ 600 V AC (Full Load) 25 A @ 600 V AC (Resistive Load)	600 V AC	3/4 hp @ 120 V AC 2 hp @ 240 V AC	3 hp @ 240 V AC 5 hp @ 480 V AC 7 1/2 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	24V AC	6.5VA	__	11 A @ 600 V AC (Full Load) 28 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 2 hp @ 240 V AC	5 hp @ 240 V AC 7 1/2 hp @ 480 V AC 10 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	24V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	000000
12	24V AC	6.5VA	__	22 A @ 600 V AC (Full Load) 45 A @ 600 V AC (Resistive Load)	600 V AC	2 hp @ 120 V AC 5 hp @ 240 V AC	7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 20 hp @ 600 V AC	3.5"	2.4"	3.5"	000000000	000000
12	24V AC	6.5VA	__	32 A @ 600 V AC (Full Load) 55 A @ 600 V AC (Resistive Load)	600 V AC	3 hp @ 120 V AC 7 1/2 hp @ 240 V AC	15 hp @ 240 V AC 30 hp @ 480 V AC 30 hp @ 600 V AC	3.5"	2.4"	3.5"	000000000	000000
12	120V AC	6.5VA	__	9 A @ 600 V AC (Full Load) 25 A @ 600 V AC (Resistive Load)	600 V AC	3/4 hp @ 120 V AC 2 hp @ 240 V AC	3 hp @ 240 V AC 5 hp @ 480 V AC 7 1/2 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	120V AC	6.5VA	__	11 A @ 600 V AC (Full Load) 28 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 2 hp @ 240 V AC	5 hp @ 240 V AC 7 1/2 hp @ 480 V AC 10 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	120V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	000000
12	120V AC	6.5VA	__	22 A @ 600 V AC (Full Load) 45 A @ 600 V AC (Resistive Load)	600 V AC	2 hp @ 120 V AC 5 hp @ 240 V AC	7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 20 hp @ 600 V AC	3.5"	2.4"	3.5"	000000000	000000
12	120V AC	6.5VA	__	32 A @ 600 V AC (Full Load) 55 A @ 600 V AC (Resistive Load)	600 V AC	3 hp @ 120 V AC 7 1/2 hp @ 240 V AC	15 hp @ 240 V AC 30 hp @ 480 V AC 30 hp @ 600 V AC	3.5"	2.4"	3.5"	000000000	000000
12	240V AC	6.5VA	__	9 A @ 600 V AC (Full Load) 25 A @ 600 V AC (Resistive Load)	600 V AC	3/4 hp @ 120 V AC 2 hp @ 240 V AC	3 hp @ 240 V AC 5 hp @ 480 V AC 7 1/2 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	240V AC	6.5VA	__	11 A @ 600 V AC (Full Load) 28 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 2 hp @ 240 V AC	5 hp @ 240 V AC 7 1/2 hp @ 480 V AC 10 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	00000
12	240V AC	6.5VA	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	000000000	000000
12	240V AC	6.5VA	__	22 A @ 600 V AC (Full Load) 45 A @ 600 V AC (Resistive Load)	600 V AC	2 hp @ 120 V AC 5 hp @ 240 V AC	7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 20 hp @ 600 V AC	3.5"	2.4"	3.5"	000000000	000000
12	240V AC	6.5VA	__	32 A @ 600 V AC (Full Load) 55 A @ 600 V AC (Resistive Load)	600 V AC	3 hp @ 120 V AC 7 1/2 hp @ 240 V AC	15 hp @ 240 V AC 30 hp @ 480 V AC 30 hp @ 600 V AC	3.5"	2.4"	3.5"	000000000	000000
12	24V DC	5.4W	__	9 A @ 600 V AC (Full Load) 25 A @ 600 V AC (Resistive Load)	600 V AC	3/4 hp @ 120 V AC 2 hp @ 240 V AC	3 hp @ 240 V AC 5 hp @ 480 V AC 7 1/2 hp @ 600 V AC	3.2"	1.8"	3.9"	00000000	000000
12	24V DC	5.4W	__	17 A @ 600 V AC (Full Load) 32 A @ 600 V AC (Resistive Load)	600 V AC	1 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.9"	00000000	000000
12	24V DC	5.4W	__	22 A @ 600 V AC (Full Load) 45 A @ 600 V AC (Resistive Load)	600 V AC	2 hp @ 120 V AC 5 hp @ 240 V AC	7 1/2 hp @ 240 V AC 15 hp @ 480 V AC 20 hp @ 600 V AC	3.5"	2.4"	4.2"	00000000	000000
12	24V DC	5.4W	__	32 A @ 600 V AC (Full Load) 55 A @ 600 V AC (Resistive Load)	600 V AC	3 hp @ 120 V AC 7 1/2 hp @ 240 V AC	15 hp @ 240 V AC 30 hp @ 480 V AC 30 hp @ 600 V AC	3.5"	2.4"	4.2"	00000000	000000

Auxiliary Contacts

Side-Mount Auxiliary Contact

Front-Mount Auxiliary Contact

Number of Circuits Controlled	For Relay Width	Switch Starting Position	Industry Designation	Mounting Location		Each
2	1.7"	1 Off (Normally Open) and 1 On (Normally Closed)	DPST-1NO/1NC	Front	00000000	000000
2	1.8", 2.4"	1 Off (Normally Open) and 1 On (Normally Closed)	DPST-1NO/1NC	Front	00000000	00000
2	1.8", 2.4"	1 Off (Normally Open) and 1 On (Normally Closed)	DPST-1NO/1NC	Side	00000000	00000
2	1.8", 2.4"	2 Off (Normally Open)	DPST-NO	Front	0000000	00000
2	1.8", 2.4"	2 On (Normally Closed)	DPST-NC	Front	0000000	00000
4	1.8", 2.4"	1 Off (Normally Open) and 3 On (Normally Closed)	4PST-1NO/3NC	Front	0000000	00000
4	1.8", 2.4"	2 Off (Normally Open) and 2 On (Normally Closed)	4PST-2NO/2NC	Front	0000000	00000
4	1.8", 2.4"	3 Off (Normally Open) and 1 On (Normally Closed)	4PST-3NO/1NC	Front	0000000	00000
4	1.8", 2.4"	4 Off (Normally Open)	4PST-NO	Front	0000000	00000
4	1.8", 2.4"	4 On (Normally Closed)	4PST-NC	Front	0000000	00000

Replacement Coils

For Switching Current (Load Type)	Input Voltage	Input Frequency, Hz		Each
9A-17A (Full Load)	24V AC	60	0000000	000000
9A-17A (Full Load)	120V AC	60	0000000	00000
9A-17A (Full Load)	240V AC	60	0000000	00000
22A-32A (Full Load)	24V AC	60	0000000	00000
22A-32A (Full Load)	120V AC	60	0000000	00000
22A-32A (Full Load)	240V AC	60	0000000	00000

DIN-Rail Mount Solid State Relays

Relay with Integrated Heat Sink

Unlike mechanical relays, these solid state relays have no moving parts, so they require less maintenance and last longer, switch faster, and are quieter. They mount on 35 mm DIN rail (also known as DIN 3) for fast installation. An LED indicator lights up when these relays are connected, so you can quickly confirm that they’re wired correctly. IP20 rated, their terminals are recessed, so they prevent fingers and other objects from touching live circuits.

Relays with an integrated heat sink disperse heat to increase the relay’s current rating.

1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO
Number of Terminals	Input Voltage	Control Current, mA	Switching Current @ Voltage (Load Type)	Max. Switching Voltage	hp @ Switching Voltage	Ht.	Wd.	Dp.	Features		Each
Single Phase
4	24V AC, 120V AC, 208V AC, 240V AC, 277V AC/24V DC, 48V DC, 60V DC, 120V DC	13	20 A @ 600 V AC (Full Load)	660V AC	1/3 hp @ 115 V AC 1 hp @ 230 V AC	4.33"	0.7"	3.447"	Integrated Heat Sink, LED Indicator	0000000	000000
4	24V AC, 120V AC, 208V AC, 240V AC, 277V AC/24V DC, 48V DC, 60V DC, 120V DC	13	30 A @ 230 V AC (Full Load)	264V AC	3/4 hp @ 115 V AC 2 hp @ 230 V AC	4.33"	0.89"	4.917"	Integrated Heat Sink, LED Indicator	0000000	000000
2 Circuits Controlled with 2 Off (Normally Open)—DPST-NO
Two Phase
6	5V DC, 6V DC, 12V DC, 24V DC, 30V DC	10	40 A @ 600 V AC (Full Load)	660V AC	5 hp @ 230 V AC 10 hp @ 480 V AC	4.33"	2.84"	4.66"	Integrated Heat Sink, LED Indicator	0000000	000000

Infrequent-Cycle Relays

2 Circuits

3 Circuits

For use with equipment that cycles on and off, these relays meet UL 508 for air conditioning and heating. Connections are accessible from the front, so you can mount relays side-by-side. Also known as definite-purpose contactors.

Also Available: Auxiliary contacts for 3.8"-7.2" Ht. relays. They allow you to add a signaling device or control another relay. Please select 6564K99, then select the McMaster-Carr part number of your relay and whether you want to switch one circuit on (1 Normally Open) or off (1 Normally Closed).

			Switching Current @ 600V AC		hp @ Switching Voltage
Number of Terminals	Input Voltage	Control Power	Full Load	Resistive Load	Single Phase	Three Phase	Ht.	Wd.	Dp.	Quick-Disconnect Tab Wd.		Each
2 Circuits Controlled with 2 Off (Normally Open)—DPST-NO
With Quick-Disconnect and Screw Terminals
4	24V AC	6.5VA	30A	40A	2 hp @ 115 V AC 5 hp @ 230 V AC	__	3.2"	2"	2.3"	0.25"	00000000	000000
4	120V AC	6.5VA	30A	40A	2 hp @ 115 V AC 5 hp @ 230 V AC	__	3.2"	2"	2.3"	0.25"	00000000	00000
4	208V AC, 240V AC	6.5VA	30A	40A	2 hp @ 115 V AC 5 hp @ 230 V AC	__	3.2"	2"	2.3"	0.25"	00000000	00000
3 Circuits Controlled with 3 Off (Normally Open)—3PST-NO
With Quick-Disconnect and Screw Terminals
6	24V AC	7VA	40A	50A	3 hp @ 115 V AC 7 1/2 hp @ 230 V AC	10 hp @ 230 V AC 20 hp @ 460 V AC 20 hp @ 575 V AC	3.8"	2.4"	3.4"	0.25"	00000000	000000
6	120V AC	7VA	40A	50A	3 hp @ 115 V AC 7 1/2 hp @ 230 V AC	10 hp @ 230 V AC 20 hp @ 460 V AC 20 hp @ 575 V AC	3.8"	2.4"	3.4"	0.25"	00000000	000000
6	208V AC, 240V AC	7VA	40A	50A	3 hp @ 115 V AC 7 1/2 hp @ 230 V AC	10 hp @ 230 V AC 20 hp @ 460 V AC 20 hp @ 575 V AC	3.8"	2.4"	3.4"	0.25"	00000000	000000

Spade-Terminal Relays

Using a low-current signal, these relays are often used to control small motors and heaters. These relays attach to quick-disconnect terminals.

Surface mount relays, also known as power relays, have a slot on the flange for mounting them to flat surfaces.

Relay-socket mount relays, also known as ice cube relays, offer three ways to connect. Plug them into a socket (sold separately), connect them with quick-disconnect terminals, or solder wires directly to the terminals.

Relay-socket/surface mount relays can plug into a socket or mount to a flat surface.

Relay sockets mount directly on 35 mm DIN rail (also known as DIN 3 rail) for fast installation. They can also mount to a flat surface.

Surface Mount

6 Terminals

2 Circuits Controlled with 2 Off (Normally Open)—DPST-NO
Number of Terminals	Input Voltage	Control Current, mA	Maximum Switching Voltage	hp @ Switching Voltage	Ht.	Wd.	Dp.	Quick-Disconnect Tab Wd.		Each
6	120V AC	20	250V AC	1 1/2 hp @ 120 V AC 2 hp @ 240 V AC 2 hp @ 277 V AC	1.3"	2.7"	1.9"	0.25"	0000000	000000

Touch-Safe DIN-Rail Mount Infrequent-Cycle Relays

Operate equipment that cycles on and off from your control cabinet. Often called definite-purpose contactors, these relays meet UL 508 for use with air conditioning and heating. Mount them directly to 35 mm DIN rail (also known as DIN 3 rail) for fast installation. They have recessed terminals that prevent fingers and other objects from touching live circuits. You can wire the control circuit on either side of the relay, which helps you use less wire.

Auxiliary contacts (sold separately) allow you to add a signaling device or control another relay.

Use replacement coils to swap out a broken coil or change the input voltage of a relay. The full load current of the relay must match the full load current range of the coil.

10 Terminals

12 Terminals

			Switching Current @ 600V AC			hp @ Switching Voltage
Number of Terminals	Input Voltage	Control Power	Full Load	Resistive Load	Max. Switching Voltage	Single Phase	Three Phase	Ht.	Wd.	Dp.		Each
Relays
3 Circuits Controlled with 3 Off (Normally Open)—3PST-NO
10	24V AC	9VA	40A	50A	600V AC	3 hp @ 120 V AC 7 1/2 hp @ 240 V AC	10 hp @ 240 V AC 30 hp @ 480 V AC 40 hp @ 600 V AC	3.5"	1.8"	3.5"	00000000	0000000
10	24V AC	9VA	50A	55A	600V AC	3 hp @ 120 V AC 10 hp @ 240 V AC	15 hp @ 240 V AC 30 hp @ 480 V AC 40 hp @ 600 V AC	3.5"	1.8"	3.5"	00000000	000000
10	24V AC	15VA	70A	90A	600V AC	5 hp @ 120 V AC 15 hp @ 240 V AC	25 hp @ 240 V AC 50 hp @ 480 V AC 50 hp @ 600 V AC	5.4"	2.2"	4.5"	00000000	000000
10	24V AC	15VA	80A	115A	600V AC	7 1/2 hp @ 120 V AC 15 hp @ 240 V AC	30 hp @ 240 V AC 60 hp @ 480 V AC 60 hp @ 600 V AC	5.4"	2.2"	4.5"	00000000	000000
10	120V AC	9VA	40A	50A	600V AC	3 hp @ 120 V AC 7 1/2 hp @ 240 V AC	10 hp @ 240 V AC 30 hp @ 480 V AC 40 hp @ 600 V AC	3.5"	1.8"	3.5"	00000000	000000
10	120V AC	9VA	50A	55A	600V AC	3 hp @ 120 V AC 10 hp @ 240 V AC	15 hp @ 240 V AC 30 hp @ 480 V AC 40 hp @ 600 V AC	3.5"	1.8"	3.5"	00000000	000000
10	120V AC	15VA	70A	90A	600V AC	5 hp @ 120 V AC 15 hp @ 240 V AC	25 hp @ 240 V AC 50 hp @ 480 V AC 50 hp @ 600 V AC	5.4"	2.2"	4.5"	00000000	000000
10	120V AC	15VA	80A	115A	600V AC	7 1/2 hp @ 120 V AC 15 hp @ 240 V AC	30 hp @ 240 V AC 60 hp @ 480 V AC 60 hp @ 600 V AC	5.4"	2.2"	4.5"	00000000	000000
10	240V AC	9VA	40A	50A	600V AC	3 hp @ 120 V AC 7 1/2 hp @ 240 V AC	10 hp @ 240 V AC 30 hp @ 480 V AC 40 hp @ 600 V AC	3.5"	1.8"	3.5"	00000000	000000
10	240V AC	9VA	50A	55A	600V AC	3 hp @ 120 V AC 10 hp @ 240 V AC	15 hp @ 240 V AC 30 hp @ 480 V AC 40 hp @ 600 V AC	3.5"	1.8"	3.5"	00000000	000000
10	240V AC	15VA	70A	90A	600V AC	5 hp @ 120 V AC 15 hp @ 240 V AC	25 hp @ 240 V AC 50 hp @ 480 V AC 50 hp @ 600 V AC	5.4"	2.2"	4.5"	00000000	000000
10	240V AC	15VA	80A	115A	600V AC	7 1/2 hp @ 120 V AC 15 hp @ 240 V AC	30 hp @ 240 V AC 60 hp @ 480 V AC 60 hp @ 600 V AC	5.4"	2.2"	4.5"	00000000	000000
10	24V DC	5.4W	40A	50A	600V AC	3 hp @ 120 V AC 7 1/2 hp @ 240 V AC	10 hp @ 240 V AC 30 hp @ 480 V AC 40 hp @ 600 V AC	3.5"	1.8"	4.2"	0000000	000000
Relays with 1 Off (Normally Open) Auxiliary Contact
3 Circuits Controlled with 3 Off (Normally Open)—3PST-NO
12	24V AC	9VA	20A	30A	600V AC	1 1/2 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	00000000	00000
12	120V AC	9VA	20A	30A	600V AC	1 1/2 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	00000000	00000
12	240V AC	9VA	20A	30A	600V AC	1 1/2 hp @ 120 V AC 3 hp @ 240 V AC	5 hp @ 240 V AC 10 hp @ 480 V AC 15 hp @ 600 V AC	3.2"	1.8"	3.2"	00000000	00000

Auxiliary Contacts

Front-Mount Auxiliary Contact

Side-Mount Auxiliary Contact

Number of Circuits Controlled	For Relay Width	Switch Starting Position	Industry Designation	Mounting Location		Each
2	1.8", 2.2", 2.4"	2 Off (Normally Open)	DPST-NO	Front	0000000	000000
2	1.8", 2.2", 2.4"	2 On (Normally Closed)	DPST-NC	Front	0000000	00000
2	1.8", 2.4"	1 Off (Normally Open) and 1 On (Normally Closed)	DPST-1NO/1NC	Front	00000000	00000
2	1.8", 2.4"	1 Off (Normally Open) and 1 On (Normally Closed)	DPST-1NO/1NC	Side	00000000	00000
4	1.8", 2.2", 2.4"	1 Off (Normally Open) and 3 On (Normally Closed)	4PST-1NO/3NC	Front	0000000	00000
4	1.8", 2.2", 2.4"	2 Off (Normally Open) and 2 On (Normally Closed)	4PST-2NO/2NC	Front	0000000	00000
4	1.8", 2.2", 2.4"	3 Off (Normally Open) and 1 On (Normally Closed)	4PST-3NO/1NC	Front	0000000	00000
4	1.8", 2.2", 2.4"	4 Off (Normally Open)	4PST-NO	Front	0000000	00000
4	1.8", 2.2", 2.4"	4 On (Normally Closed)	4PST-NC	Front	0000000	00000

Replacement Coils

For Switching Current (Load Type)	Input Voltage	Input Frequency, Hz		Each
9A-17A (Full Load)	24V AC	60	0000000	000000
9A-17A (Full Load)	120V AC	60	0000000	00000
9A-17A (Full Load)	240V AC	60	0000000	00000
22A-32A (Full Load)	24V AC	60	0000000	00000
22A-32A (Full Load)	120V AC	60	0000000	00000
22A-32A (Full Load)	240V AC	60	0000000	00000
70A-80A (Full Load)	24V AC	60	0000000	00000
70A-80A (Full Load)	120V AC	60	0000000	00000
70A-80A (Full Load)	240V AC	60	0000000	00000

Water-Resistant Stud-Terminal Relays

8VA and 12VA Control Power

Sealed to keep out water, these relays are often used for DC-powered equipment such as forklifts, floor scrubbers, and trucks. They are rated for continuous operation for cycles that run longer than 30 seconds.

1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT
Number of Terminals	Input Voltage	Control Power, VA	Full Load Switching Current @ Voltage	Ht.	Wd.	Dp.	Stud Thread Size		Each
6	24V DC	12	100 A @ 24 V DC	4.6"	3.3"	2.9"	5/16"-24	0000000	0000000

Machine-Guard Relays

The interlocked opposing contacts won't close at the same time, so these relays are suitable for safety applications such as machine guarding. The screw terminals are recessed to prevent accidental contact with live connections. Mount them on 35 mm DIN rail (also known as DIN 3 rail) or flat surfaces. These relays are built to IEC dimensional standards.

Auxiliary contact (sold separately) allows you to add a signaling device or control another relay.

Relay

4 Circuits Controlled with 3 Off (Normally Open) and 1 On (Normally Closed)—4PST-3NO/1NC
Number of Terminals	Input Voltage	Control Current, mA	Switching Current @ 600V AC	Max. Switching Voltage	Ht.	Wd.	Dp.		Each
10	24V AC	125	10A	600V AC	2.3"	1.7"	2.2"	00000000	000000
10	120V AC	25	10A	600V AC	2.3"	1.7"	2.2"	00000000	00000
10	240V AC	12.5	10A	600V AC	2.3"	1.7"	2.2"	00000000	00000

Auxiliary Contacts

Auxiliary Contact

Number of Circuits Controlled	Switch Starting Position	Industry Designation	Mounting Location	For Relay Width		Each
2	1 Off (Normally Open) and 1 On (Normally Closed)	DPST-1NO/1NC	Front	1.7"	00000000	000000