Alter vibration speed in addition to force output. The speed adjustment dial lets you change speed while running these vibrators. They come set at a force. Adjust the force by changing the position of the weight within the housing. They're often used to shake and settle powders, flakes, and pellets in bins and hoppers. Motor is totally enclosed for use in environments with splashing water and dust. Every 10 pounds of dry material requires one pound of force to move it. If your bin has 200 pounds of dry material, you need a vibrator with at least 20 pounds of force.

For technical drawings and 3-D models, click on a part number.

Solve flow problems at construction sites and other locations without electricity or an air supply. These vibrators are often used to shake sand, gravel, and other small particles in drums and spreaders. They have wire leads to connect a 12-volt battery (sold separately). Motor is totally enclosed fan cooled (TEFC) for use in environments with splashing water and dust. Every 10 pounds of dry material requires one pound of force to move it. If your bin has 200 pounds of dry material, you need a vibrator with at least 20 pounds of force.

For technical drawings and 3-D models, click on a part number.

Since they generate vibration with electromagnets, these vibrators have no moving parts that can wear out and shorten service life. They pound on container walls to dislodge sticky, caked-on materials. Vibrators require a controller (sold separately). Bin wall thickness determines the force required to move the material in the bin. To select a vibrator strong enough for your application, find your bin's wall thickness in the table.

Style 4 have an internal cushion for reduced noise. They are water resistant for use in environments with splashing water.

Style 5 make direct contact with the container wall for maximum impact. They are water resistant for use in environments with splashing water.

Required controllers have an adjustable speed dial. Controllers for 3,600 VPM vibrators are rated NEMA 4 for protection against washdowns, corrosion, and dust. Choose by matching the vibrator's voltage, vibration speed, and current to the controller.

For technical drawings and 3-D models, click on a part number.

Combine small samples and settle mold and die castings.

For technical drawings and 3-D models, click on a part number.

Combine small samples and settle mold and die castings. All have a variable-speed control.

For technical drawings and 3-D models, click on a part number.

Keep parts in constant motion for faster finishing than tumbling machines. Fill with media and run wet or dry to finish multiple parts at the same time. These machines can be filled to 100% capacity.

The thick bowl can handle steel media and heavy loads. These machines keep parts in constant motion for faster finishing than tumbling machines. The clear lid lets you see work in progress and the drain makes cleanup easier. Fill with media and run wet or dry to finish multiple parts at the same time. Machines can be filled to 100% capacity. They cannot be sold to Canada due to local energy efficiency regulations.