These boxes come ready to use with receptacles and/or light switches installed.

Knockouts allow you to modify these boxes to fit your application.

Close off unused switches.

Knockouts allow you to modify these boxes to fit your application.

Close off unused outlets.

Close off unused outlets.

Enclose and protect outlets in concrete and under carpeted or tile floors.

Designed for commercial use, these heavy duty boxes have thick, rigid walls.

Mount these boxes on the surface of your wall in areas where you can't create a recess.

These boxes come ready to use with receptacles installed.

These corrosion-resistant covers can withstand rain, snow, and wet conditions without being damaged.

Close off unused outlets.

These corrosion-resistant boxes are built to withstand exposure to rain, snow, and wet conditions.

Rain, snow, and wet conditions won't damage these corrosion-resistant covers.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. Enclosures are made of nonconductive polycarbonate that resists denting, chipping, and cracking.

These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.

PVC enclosures are nonconductive and chemical resistant, withstanding solvents, alkalies, and acids.

With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.

Mounting feet make attachment to machines and walls hassle-free.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. These enclosures have a clear cover, so you can inspect components without opening the enclosure.

Control access to these enclosures with a key-operated lock.

Mounting feet make attachment to machines and walls hassle-free. These enclosures are small and lightweight for use with sensors, switches, testing devices, and circuit boards.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself.

Made of fiberglass, these enclosures are lightweight and won’t rust, but still shield push-button controls from water, dirt, and oil.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.

Small and lightweight, these enclosures are used with sensors, switches, and testing devices.

These enclosures allow you to inspect your electronics without opening the cover.

These enclosures have internal slots to hold circuit boards in place.

With internal slots and external fins, these enclosures hold circuit boards securely and dissipate heat to keep electronics from overheating.

Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks.

Able to withstand periodic submersion in water, these enclosures offer our highest level of protection from liquids. They’re made of fiberglass to resist impact and corrosion from solvents, alkalis, and mild acids.

Fasten these enclosures to machine control panels or walls without exposing the contents to wet and oily environments.

Check on the contents inside these enclosures from every angle without opening them in wet environments.

Inspect components without opening the cover.

Holes in the cover allow easy installation of push buttons, switches, and indicating lights.

Holes in the cover of these enclosures allow easy installation of push buttons, switches, and indicating lights.

Two separate chambers allow you to access wiring connections in the lower section without disturbing components that you install in the upper section.

Control access to these enclosures with a key-operated lock.

No need to cut your own holes—these enclosures already have them to make installing push-buttons, switches, and indicating lights quick and easy.

With an overhanging top and a NEMA 3RX rating, these enclosures guard electronics from snow, rain, and sleet as well as dirt and light splashing.

Mounted horizontally, such as on machinery or rooftops, these enclosures protect wiring and other electrical components from rain, snow, and ice thanks to their overhanging top.

Bury these enclosures in the ground or in concrete. They withstand freeze/thaw conditions and have an open bottom for water drainage.

For use in hazardous locations, these enclosures are rated NEMA 7 and 9 and meet UL Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.

Create battery-powered, hand-held devices such as card and signal readers—these enclosures have a clear cover for checking screens and status lights inside.

A 9-volt battery fits inside a compartment in these enclosures to power testing devices and other hand-held instruments.

For use in enclosures and panels where components require battery power, these enclosures have contacts for AA and 9-volt batteries.

Rated NEMA 12 for protection from dirt and oil/coolant dripping.

Snap these enclosures onto 35 mm DIN rail and lock them in place.

Close off unused switches and outlets.

Keep switches and outlets under cover for protection from dust and dirt. These stainless steel plates resist corrosion and have a sealing gasket to keep out moisture.

Snap end and center sections together to create your own two-device or wider wall plate.

Cover existing outlets and switches for a refreshed appearance, no rewiring necessary.

Create various data connector configurations by choosing adapters to snap into the ports in these wall plates.

House and organize up to 800 lbs. of components such as servers, automation controls, and computers. All are compatible with standard 19" wide components.