The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Designed for indoor applications, these cords are often used to power appliances.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Designed for indoor use, these cords are often used to power appliances.

These self-coiling cords return to their retracted length after stretching for tangle-free storage.

A locking lever on the female socket prevents your device from disconnecting.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments.

Change the connection style between an outlet and your equipment.

Plug these cords into a vehicle outlet to power a device from the vehicle's battery.

Keep cords tangle-free and ready to use.

Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.

The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

Keep personnel safe from electric shock with ground fault protection.

With a rubber housing, these outlet strips withstand drops and other impact.

Connect multiple devices from a single outlet.

These curved outlet strips clamp onto a pole or table leg.

Install these extra-long strips onto the frame of an electrical cabinet.

Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

Plug these cords into fans that have quick-disconnect terminals.

These cords have a Nano M8 connector (also known as a pico connector) on one end and an USB Type-A connector on the other.

Plug these cords into computers, lab equipment, and office machines that have IEC connections.

A steel stand makes these reels more rugged than light duty cord reels.

Made of impact-resistant plastic, these reels are more durable than other automatic-wind cord reels.

Connect the wires in your power cord to these reels for a permanent and protected connection—the screw terminals are in a gasketed dust- and water-resistant NEMA 4 enclosure.

Intended for demanding applications, these reels include an oil- and water-resistant extension cord.

Attach the wires in a power cord to these reels for a permanent connection.

Connect devices such as computers, printers, and mobile devices.

With Kevlar-reinforced nylon armor and a high-strength aluminum connector, these USB cords stand up to frequent use and bending better than standard USB cords.

The insulation serves as a tough armor that protects these cords in high-traffic areas.

Often used in robotics, packaging, conveyors, and other applications with constant movement and high temperatures, these silicone rubber cords bend and flex at temperatures up to 325° F.

Pinch the sides on the plugs of these cords to insert them; they lock into a socket to prevent the cord from detaching.

Connect computers, monitors, printers, and other devices with DB connections.

Display video from one source on two different monitors.

The shielding blocks signal interference from nearby equipment and devices.

To send high-speed data in tough, rugged environments, these cords have an M12 connector on one end that threads onto switches, sensors, and other devices prone to vibration. The other end has a traditional RJ45 plug that connects to Ethernet equipment, such as computers, IO modules, and programmable logic controllers (PLCs).

These cords contain a single pair of twisted wires, making them lighter and more flexible than other Ethernet cords. They’re good for transportation, robotics, and automation applications.

The M12 threaded connectors on these cords are more vibration resistant than RJ45 connectors.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have an RJ45 plug on each end.

Connect computers, servers, and switches in a fiber-optic network.

Play audio from one source on two different speakers.

Connect audio to a single speaker, or extend the distance between stereo audio devices.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Securely connect equipment in data or signal applications. These cords have A- or B-coded plugs to meet the needs of your device.

Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to transmit audio, video, and data signals.

Often used in automated applications that require continuous motion, this cable sends data between computers, servers, and switches without degrading signal transmission.

Transmit data in rough industrial applications. This cable has an oil-resistant insulation.

This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.

Often used to send signal and data to order pickers and cranes, this cable withstands continuous motion applications without degrading data or signal transmission.

Connect low-current circuits such as intercoms and security systems to a building's electrical system in single-level facilities.

Transmit data between computers, connect two like cables, or connect devices that have different USB sizes or styles.

Use these connectors and cords to make Ethernet connections in wet location environments.