We will reply to your message within an hour.
Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.
Designed for use in 1/4" or 1/2" dia. through holes.
Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.
Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
For protection against dust, dirt, and washdowns, these locks are IP65 rated.
These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
Install these locks on cabinet doors and file drawers with a smaller-than-standard diameter through hole.
Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
Designed for smaller-than-standard-diameter through holes, these locks are often used for securing cabinet doors and filing cabinet drawers.
These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.
These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.
Designed for use in 1/2" dia. through holes.
Meet U.S. postal service guidelines for mailbox locks.
Often used on cabinet doors and file drawers, these cam locks fit into a ¾” dia. hole, the most common through-hole size, and have an arm that swings to lock.
Secure cabinet doors and file drawers that have smaller than standard-diameter through holes. Offering more security than standard keyed cam locks, these have circular keys that are difficult to duplicate.
Choose these locks to use your own compatible lock cylinder to match the keying of an existing system.
Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.
These locks open with their own unique key as well as a master key.
These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.
Without a keyway, you don't have to worry about these magnetic locks being picked or memorizing combinations. They are water-tight, so they resist snow, dirt, and other contaminants.
A red indicator on the lock face is visible when unlocked and hidden when locked.
Designed for food-processing and hygienic applications, these corrosion-resistant cam locks are made of FDA listed materials.
These locks require a hex key to open.
Raise the handle and it swings smoothly for easy latching and unlatching.
Press the button and the handle snaps open; push the handle shut for a secure hold.
These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.
The attached metal arm rotates to lock cabinet doors and file drawers. These locks are keyed alike, so they’re good for when you need several locks that open with the same key.
These locks are IP65 rated for protection against dust, dirt, and washdowns.
In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.
Choose these locks if you need each one to open with a different key.
Open these locks with both a master key and their own unique key.
Open multiple locks with the same key.
The mounting screws on these locks are concealed to prevent tampering.
Open each of these locks with a different key.
A master key opens all of these locks, which also have their own unique keys.
Fold the ring handle into the recess to stay out of the way when not in use.
With a molded inset grip, the handle remains recessed to stay out of the way.
Use these latches with three-point locking systems, such as those on filing cabinet doors.
Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a tight hold. They’re often used for securing cabinet doors and file drawers.
Designed for smaller-than-standard-diameter through holes, these latches are often used for securing doors and drawers.
These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.
Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.
These latches are IP65 rated for protection against dust, dirt, and washdowns.
These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
The mounting screws on these latches are concealed to prevent tampering.
Prevent water, dirt, and dust from getting into your cabinets and file drawers through the latch during low-pressure washdowns.
Also known as compression cams, these latches have an adjustable screw instead of a standard cam, so you can easily adjust the latching distance and tension over time. Press the button and the handle pops open; fold the handle into the recess to keep it out of the way and to secure the latch.
These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use.
With a finger-grip knob, these latches fit where latches with handles won't.
Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.
With a flat inset grip, the handle is recessed to stay out of the way.
Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code.
Similar to locks on a hotel safe, each user sets a new combination.
Set a combination and reset it at any time.
With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.
Secure these latches with a padlock.
Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated.
These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors.
Use these latches alone for single-point latching or add latch kits for multiple-point latching and extra holding power.
Choose these L-handle locks if you need several that open with the same key.
Use these latches alone for single-point latching, or add latch kits for more holding power.
Choose these locks if you need several that open with the same key.
The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.
Choose these keyed alike locks when you need several that open with the same key.
Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors.
Choose these keyed alike locks if you need several that open with the same key.
Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.
When released, the spring-loaded ring handle returns to its recessed position to stay out of the way.
Keep doors on refrigerators and industrial enclosures closed.
Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.
For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.
Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers.
An emergency release handle offers a means of escape if the door closes with someone inside an enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.
To open, push in the knob and pull the tab.
A catch grabs and holds the strike plate, so doors stay shut when you push them closed.
An electrical switch allows these latches to power a light or other signal to indicate whether a door is open or closed.
Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.
Turn the screw on the latch to adjust the gripping force on the strike plate.
Close and open these grab latches with a push—there's no need for a handle.
Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.
Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.
These latches are adjustable; push the ball in and rotate it to adjust force as well as compensate for misalignment.
These latches snap together to secure doors. They have a return spring to snap tight with a push and release with a pull.
Close and open these roller latches with a push—there's no need for a handle.
Doors stay closed with the pressure of rollers against the strike plate.
There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.
To prevent doors from slamming, these latches are hydraulic.
These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.
When not in use, push the knob in so it's flush and out of the way; it pops out with a touch.
Push in the knob to open these latches.
Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.
Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.
An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.
Operate these padlockable latches from either side of the door—there is a handle on both sides.
Snap these latches together to secure doors and use a hex key to open.
The low profile means less of the lock is exposed, reducing the potential for damage.
Push doors closed and a return spring automatically snaps these locks together to secure them tightly in place. Pull them open with the included two-way key, which is also known as a double-bit key.
Install these hasps over a cam lock and secure them with a padlock to increase security on cabinets and chests.
Add a padlock to secure these latches, which reach around corners to pull two surfaces together.
For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.
An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.
Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.
Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.
Adjust the latching distance to compensate for gasketing and misalignment.
Each latch comes with a variety of strike plates for different mounting options.
Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.
No need for a strike plate, these latches hook into a lip or notch.
Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.
These latches have a safety catch to prevent accidental opening.
The latch arm is coated with vinyl so it won't scratch surfaces.
A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.
Easily snap these latches into cutouts without tools or other hardware.
These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.
To prevent accidental opening, these latches have a safety catch.
These latches use downward compression to pull surfaces together for sealing gasketed doors.
A safety catch prevents accidental opening.
These latches are typically used to secure hoods and covers.
Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.
Mount these latches on a corner to draw perpendicular surfaces together.
These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.
Draw lightweight surfaces together with these latches.
Use these L-handle latches to draw lightweight surfaces together.
Lift and turn the handle 180° to open and close these latches.
With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.
Use a 5/16" hex key to open and close these locks.
To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.
These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.
Open these locks with a slotted screwdriver.
Open these locks with a Torx driver or the included Torx keys.
Open several draw locks with the same key.
Lift and turn the handle 180° to open and close this lock.
For use on gasketed doors, these latches use downward compression to pull surfaces together.
Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.
Choose these cylinders if you need several cylinders that open with the same key.
Choose these cylinders if you need cylinders that each open with a different key and also open with a master key.
Choose these cylinders if you need cylinders that each open with a different key.
Twist these latches to hold small lightweight doors and panels closed.
Hold doors, drawers, and hatches closed with the turn of a handle.
Turn the handle to keep doors, drawers, and hatches closed.
Choose these lock cylinders if you need several lock cylinders that open with the same key.
Also known as rim lock cylinders, these are for use in locks that are mounted to the door's surface.
Designed to withstand vandalism better than other lock cylinders, these are for use in locks that are mortise mounted into a cutout in the door.
Choose these lock cylinders if you want individual lock cylinders or groups of lock cylinders that open with their own key, but also open with a master key.
Choose these lock cylinders if you need lock cylinders that each open with a different key.
These locks use electromagnetic force to hold double doors closed, often as part of an access-control system.
These versatile strike plates are for use with door handles and knobs, pry-resistant door handles and knobs, and pry-resistant crossbars.
All of these strike plates can be used with door handles and knobs.
Use these strike plates with touch bars and crossbars, but not pry-resistant crossbars.
For use alone or as part of an access-control system, these locks use electromagnetic force to hold single doors closed.
If your lock latches to a mechanism that's mounted to the door's surface instead of in the door jamb, select these strike plates.
For use alone or as part of an access-control system, these locks use magnets to hold gates closed.