Use these connectors in general purpose residential and commercial applications.

These receptacles are for light-duty use.

A good fit for tight spaces, these are smaller than standard straight-blade plugs. Also known as NEMA midget plugs.

Install these receptacles indoors. They keep personnel safe from electric shock by adding ground fault protection.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation and grip the wire securely. Access the wire connection by opening the hinged housing.

Charge mobile devices without an adapter.

Internal shutters prevent the insertion of foreign objects and accidental contact with power.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles.

Minimize the risk of electric shock and electrical fires with a single receptacle.

Add a fuse to protect equipment from current overload.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.

Add a fuse to protect equipment from current overload. When mated with a receptacle, these plugs have an extra-tight fit to remain secure in high vibration environments. They're also known as hospital grade plugs.

Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.

Attach these general purpose receptacles to DIN rail to bring power closer to where you need it.

Prevent damage to electronic equipment caused by spikes in current. Mount these receptacles to DIN rail.

Pair these connectors with standard IEC power cords to bring power into or out of your electronic devices.

Rated IP67, these connectors create a dust- and watertight seal where they fit into the housing of power supplies, appliances, and other electronic devices. Instead of hardwiring your devices, these connectors let you plug in a standard IEC power cord and turn the power on and off with a built-in switch.

With a built-in switch, these connectors run power to appliances, power supplies, and other electronic devices while also filtering damaging EMI (electromagnetic interference).

Bring power into electronic devices while protecting them from harmful electromagnetic interference (EMI).

Use these general purpose connectors indoors in high vibration applications. A quarter turn locks them together when mated to remain secure in high-vibration applications.

A good fit for tight spaces, these connectors are also known as NEMA midget plugs. They turn to lock together when mated to prevent accidental disconnection.

Protect computers and other sensitive equipment from signal interference; these receptaces are also known as isolated ground receptacles. They turn to lock together when mated to prevent accidental disconnection.

Protect plugs and sockets in washdown environments when not in use.

Rated NEMA 6P, NEMA 13, IP66, and IP69K when mated, these connectors withstand high-pressure, high-temperature washdowns, oil/coolant splashing, and are corrosion-resistant so they can be used in high-vibration marine environments.

These connectors meet international standards IEC 309-1 and 309-2. They prevent an electrical arc when separating mated connectors, so you can safely connect and disconnect with the power on.

Caps are watertight to protect safe-break plugs when not in use.

Caps are watertight to protect hazardous location safe-break plugs when not in use.

Build a connector that fits in tight spaces by combining male and female inserts for power and signal with a compact base and a hood.

Configure a connector for your application—combine inserts for power and signal with a base and a hood.

Use these connectors in oily and washdown environments; they're rated NEMA 4X and 12. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.

Carry up to four times the current of standard Compact Latching Connectors. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.

These connectors are often used with 18 mm and 30 mm proximity switches and limit switches.

Join two connectors that both have internal threads.

These connectors withstand corrosion, abrasion, and welding slag. They're often used with 18 mm and 30 mm proximity switches and limit switches.

These connectors withstand corrosion, abrasion, and welding slag. Screw them together for a secure connection. They're often used with 12 mm proximity switches, valves, and power supply units.

Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.

To save space and reduce the number of cords in industrial automation setups, these splitters join two devices with M12 connectors to a single cord, distribution block, or I/O module with M12 connectors.

Screw these connectors together for a more secure connection than push-in connectors.

The largest signal/power connectors we offer, these are often used with conveyors, cooling fans, and grinders.

Push these connectors together to quickly create signal and data connections in tight spaces. All are smaller than M5 and M8 connectors. They also need less space to mate than screw-together connectors, which require two hands to twist them in place.

Join two devices with M8 connectors to a single cord, distribution block, or I/O module with M12 connectors to save space and reduce the number of cords in industrial automation setups. Often used with sensors and switches, these splitters send or receive two signals through one connection.

Join sensors, switches, and other devices to cords, distribution blocks, and I/O modules with different numbers of poles.

Join M8 connections to M12 connections.

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

Quickly replace or add connectors to an existing wiring system—connectors come assembled with wire leads already installed. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

Install these connectors in panels, enclosures, and bulkheads to join equipment with compatible Deutsch-style DC connectors.

Configure a connector for your application—combine housings with pins and sleeves for different wire sizes. They fit AMP MATE-N-LOK connectors.

Sets include a plug and socket with wire leads already installed, so they can be quickly added to existing wiring systems. They fit standard Molex plugs and sockets.

A sealed housing protects connectors from weather. Sets include a plug and socket with wire leads already installed. They fit standard Molex connectors.

Rated to MIL-DTL-5015 specifications, these connectors are compatible with other products that meet the same standard. They screw together for a secure connection.

These connectors have the same pin and socket configuration as connectors that meet MIL-DTL-26482, so they can be used with products that meet the same standard. Quickly mate them by pushing them together.

Power small devices, such as chargers for electronics, from a vehicle. Also known as cigarette-lighter plugs and sockets.

These general purpose M23 connectors send power or signal to servomotors, servocontrollers, and servodrives.

A current rating up to 400 amps makes these connectors suitable for use in industrial machinery and floodlights.

Often used in devices that branch off of the main power line, these connectors power high-amperage fans, pumps, and machines in motor controls, conveyors, and sorting and packaging systems.

With a ferrite filter block surrounding their contacts, these connectors control and reduce the electromagnetic (EMI) and radio frequency (RFI) interference traveling through them.

Install these connectors in a panel cutout to create a port for transferring data.

Add RJ45 connectors to circuit boards.

These sockets have a 110 punch-down connection; use a punch-down tool to terminate.

Push these connectors together for secure Ethernet connections that are quick and easy to connect and disconnect with just one hand. You’ll know when the plug and socket are locked in place when you hear a click.

Protect equipment from electromagnetic interference.

Two-thirds the size of M12 connectors, these connectors fit into tight spaces and shield against signal interference.

These D- and X-coded M12 connectors are desgined for high-speed Ethernet cable in damp environments.

Connect multiple devices from a single outlet.

Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.

Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.

The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

A combination of an outlet box, cord, and duct, these outlet strips minimize tripping hazards and protect the cord from damage.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

These curved outlet strips clamp onto a pole or table leg.

Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.