Mount these terminals on a threaded screw or stud for a more secure connection than spade and hook terminals.

Mount these elongated ring terminals on a range of screw sizes.

A plastic cover on the barrel provides electrical insulation. These terminals can withstand temperatures up to 300°F.

When heat is applied, the enclosed solder melts, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

Thicker than standard ring terminals, these are more durable.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

A plastic cover on the barrel provides electrical insulation.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

Heat these terminals to shrink the insulation, creating a seal that keeps out water, salt, and contaminants.

A plastic cover on the barrel provides electrical insulation.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

Apply heat to shrink the insulation and create a seal that keeps out water, salt, and contaminants.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

Add strength and stability to stranded wire to protect it from damage and speed insertion into terminal blocks.

Also known as bullet terminals, these have a round tab that requires less space than the flat tab found on most quick-disconnect terminals.

These solid pins make it easier to insert stranded wire into screw-clamp connections.

A hybrid of ring and spade terminals, these install without removing the mounting screw, yet resist being pulled off.

Connect two female quick-disconnects.

A single row of terminals fits in narrow spaces.

The spring-clamp terminals on these blocks make wire installation faster than with other types of terminals. Push wire into the spring clamp for a secure connection that withstands vibration.

Blocks are made of ceramic to withstand elevated temperatures.

The spring-clamp terminals on these blocks make wire installation faster than other types of terminals. Push wire into the spring clamp for a secure connection that withstands vibration.

Recessed terminals prevent accidental contact with a live circuit.

Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.

Blocks mount in a cutout and have terminals on both sides.

Stack multiple ring or spade terminals on the stud terminal; the current flows through the stacked terminals.

Protect connections against corrosion.These bars are tin-plated copper and have stainless steel terminals.

With the help of distribution blocks, you can take a high-current wire from your power source and connect it to one or more electrical devices.

These splices can withstand higher temperatures than insulated splices.

Crimp the barrel twice on each end for an extra-tight grip in high-vibration applications. A plastic cover fully insulates these splices.

The most secure, electrically conductive, and environmentally sealed connection we offer, these splices have enclosed solder that melts when heat is applied.

These splices are filled with a sealant that creates a barrier to completely keep out moisture when splices are crimped.

Able to withstand temperatures up to 900°F, these splices are suitable for use in high-heat applications such as ovens, motors, and light fixtures.

Create a water- and corrosion-resistant seal while connecting two different sizes of wire.

These splices can withstand higher temperatures than insulated splices.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Join wires and cables in some of the dirtiest and wettest locations—from paper mills to marine environments—without special tools.

Insert wires and twist on the threaded end caps. The caps lock wires into place, making these splices a good choice for high-vibration applications.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

Compress the barrel twice on each end for an extra-tight grip in high-vibration applications.

Pierce the insulation of wire without stripping it to make quick connections that are also sealed to keep out water.

Make a quick, secure wire connection without crimping.

Suitable for use in tight spaces, these connectors have a narrow profile that takes up less space than standard wire splicing connectors.

Rated to 300° F, these connectors are an excellent choice for use in high-temperature applications such as HID lighting and electric heat.

Grip the wings on these connectors to increase leverage when tightening.

Soft molding over the wings provides a comfortable grip.

Twist stripped wires together, insert them into the connector, and then crimp for a dependable connection.

Tap and splice multiple wires in temporarily wet environments and up to six feet underground.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a moisture- and corrosion-resistant seal.

Filled with gel, these wire taps seal out moisture.

Tap a main wire or add a finished terminal to the end of a wire.

Keep a variety of ring terminal sizes on hand.

No crimping or wire stripping needed—this assortment includes twist-on wire connectors and insulation-piercing wire taps.

Compress the barrel twice for an extra-tight grip in high-vibration applications.

An offset tongue gives you extra space to insert wire.

Slide these lugs onto cable and strike them with your hammer to create a durable connection.

Thicker walls than standard battery terminal lugs make these more durable.

Insert your stripped cable into the compression nut and tighten; no crimping or heat is required.

Connect these clamps to a wide range of wire sizes.

Insert your stripped cable into the compression nut and tighten; no crimping or heat is required.

Made of lead, these clamps resist corrosion to stand up to marine environments. Use a lug to attach your cable to the stud.