Attach conduit to a knockout in an outlet box or enclosure.

The spiral design makes this conduit more flexible than abrasion-resistant liquid-tight flexible plastic conduit.

These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.

In addition to resisting oil, this conduit resists lubricants and grease.

Even in temperatures as low as -50° F and as high as 220° F, this conduit stays flexible.

Thicker corrugations make this conduit more crush resistant than standard flexible plastic conduit.

Join pieces of conduit.

Preventing wear and cracks, these grommets shield the sections of your conduit that rub and bang against nearby components.

Visually identify different runs of wire and cable in machine and equipment wiring.

Join pieces of conduit.

Also known as antishort bushings, these grommets slide into the ends of conduit and armored cable to protect wire and cable from sharp edges.

Attach conduit and armored cable to a knockout in an outlet box or enclosure.

Covered with a copper braid, this conduit protects wire and cable from electromagnetic interference (EMI) caused by motors and other equipment.

Attach conduit to a knockout in an outlet box or enclosure.

Connect different sizes and genders of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Join pieces of conduit.

Connect to the end of conduit or a fitting to protect wires from abrasion when being pulled.

Ground conduit by running a ground wire through the attached lug.

This nonmagnetic aluminum conduit withstands damp and corrosive environments.

Connect different sizes of conduit.

Also known as conduit bodies, these ports provide access to wire and cable inside thick-wall (rigid) metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Join pieces of conduit.

Use in food-processing and chemical plants—this is the most corrosion resistant thick-wall conduit we offer.

Attach conduit to a knockout in an outlet box or enclosure.

Slide these grommets into conduit ends to protect wire and cable from abrasion when being pulled.

Also known as electrical metallic tubing (EMT), this conduit has thin walls that easily bend with a conduit bender and can be cut with a hacksaw.

Attach conduit to a knockout in an outlet box or enclosure.

Visually identify different runs of wire and cable along walls and ceilings with this conduit that has a painted exterior.

Also known as Type A, this conduit meets the demands of continuous motion while sealing out liquid when used with liquid-tight fittings.

In addition to continuous-motion applications such as robotics, this conduit is suitable for high-vibration applications.

Secure threaded metal conduit fittings to a knockout in an outlet box or enclosure.

Transition between types of conduit.

Made from thicker and denser fiberglass than standard spark-resistant sleeving, this sleeving is more abrasion resistant and provides better insulation. The silicone rubber coating protects against sparks and molten metal splash.

Made of PVC, this sleeving resists chemicals, oil, and acids.

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.

This sleeving withstands temperatures over 1000° F, such as in refineries.

Made of Nomex fabric, this sleeving has excellent tear resistance and better abrasion resistance than nylon sleeving.

With a temperature rating of 1800° F or higher, this sleeving can withstand hotter temperatures than fiberglass and most ceramic.

This sleeving stretches to fit over items for easy installation, and then tightens around its contents for a secure fit. Choose from multiple colors to organize wire and cable.

Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Rated UL 2024 and NFPA 262, this sleeving is approved for use in plenum spaces such as duct work and above a drop ceiling. It self-extinguishes and emits minimal amounts of smoke and gas during combustion. Stretch to fit over items for easy installation; it tightens around its contents for a secure fit.

Braided from thick plastic strands, this sleeving has excellent abrasion resistance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

A hinge along the entire length makes this one-piece sleeving easy to open for installation. Interlocking ridges overlap along the opening to protect contents from dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

Made of nylon, this sleeving is the most impact- and abrasion-resistant slit corrugated sleeving we offer. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them.

This sleeving reflects heat away from contents and withstands temperatures up to 900° F. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility.

This sleeving reflects heat away from contents and withstands temperatures up to 300° F. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

A strip of hook-and-loop creates a strong seal along the entire length of this sleeving, yet it can be opened at any point to access contents. Use it to wrap around wire, cable, or hose without disconnecting them.

Zip this sleeving around wire, cable, or hose that are connected at both ends to quickly bundle them.

Organize and protect the cables on your Universal Robots arm without hindering its movement.

Unlike traditional sleeving that bunches wire and cable into a circle, this sleeving holds them flat, so it’s good for tight spaces such as vehicle interiors. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Coated with PVC, this polyester sleeving resists chemicals and solvents. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Wrap this sleeving around cable, cords and wires to protect them and to form bundles.

Made of PTFE, this sleeving has excellent resistance to chemicals and acids. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Made of neoprene rubber, this sleeving has excellent abrasion resistance. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.

Use this general purpose tubing to insulate and protect wire and cable.

With a shrink ration of four to one, this tubing creates a tight seal over irregularly shaped objects.

Identify ground wire with this green-and-yellow striped tubing.

Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.

Often used to bundle batteries, capacitors, and other electronics, this tubing tightly conforms to objects, similar to shrink wrap. It has excellent resistance to chemicals, oil, and acids.

This tubing shrinks down to a quarter of its original ID, so it creates a tight seal over irregularly shaped objects. It withstands up to 500° F.

Made of woven polyolefin/polyester fabric, this tubing has excellent abrasion resistance so it can be dragged over rough surfaces without damage.

Extra-thick walls provide better protection against abrasion and tears than standard moisture-seal tubing, as well as creating a water-resistant seal.

After being cleaned with alcohol, this tubing is bagged and sealed in a clean room. It's certified for material quality and purity.

With excellent resistance to tears and cuts, this tubing withstands demanding use.

Made of PVDF, this tubing has excellent cut and abrasion resistance. It has a flame-retardant additive that resists combustion and minimizes the spread of flames.

Also known as halogen-free tubing, this tubing produces minimal amounts of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels.

Often used in automated applications such as robotics, this highly flexible silicone rubber tubing withstands continuous motion without cracking and tearing. It resists abrasion and can be dragged over rough surfaces without damage.

Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.

Protect wire and cable without disconnecting them from an assembly. This wrap winds around and fastens with an adhesive strip.

Also known as breakout boots, these splitters insulate and seal the point where wire splits off from cable, or where cables exit from conduit.

A different shrink ratio on each end allows this tubing to fit over cable assemblies and wire harnesses with large connections, or around connectors with a 90° elbow.