We will reply to your message within an hour.
Grind these electrodes to your exact specifications.
These electrodes come with a 20° angle on both ends.
Weld stainless steel with these rods.
Use these ERCuAl-A2 rods to join different metals, such as cast iron, steel, stainless steel, copper, and bronze.
Weld different steels together, such as steel and stainless steel. These rods also work with high-strength steel alloys.
Often used to repair pipe, these rods join nickel alloys to themselves and to stainless steel and steel.
Weld stainless steel with these stick electrodes.
Weld copper, brass, and bronze with these electrodes.
Made of 85% pure nickel, these electrodes join cast iron to itself, and to mild steel and stainless steel.
Increase the wear resistance of your base metal, or restore a worn-down surface with these electrodes.
Weld nickel with these electrodes.
Press these electrodes onto the tips of spot welders to change the size and shape of your weld.
A two-part alternative to standard electrodes, these electrodes reduce waste since you can reuse the shank.
Join stainless steel with this welding wire.
Join different metals, such as cast iron, carbon steels, copper, bronze, and copper-nickel alloys.
Often used to repair pipe, this wire joins nickel alloys to themselves and to stainless steel and steel.
Use these brazing alloys with a variety of metals.
No need to add flux—these alloys have it built in.
Create stronger bonds than standard brazing alloys.
Join metal in inert atmospheres or vacuum conditions, such as furnace brazing.
To fill in large gaps, these BAg-2 alloys melt into a thicker liquid than standard brazing alloys.
When melted, these alloys form a thin liquid that easily flows into smaller gaps than standard gap-filling brazing alloys.
Use these alloys on metal subject to corrosion.
Don't worry about adding flux when brazing corrosion resistant metals such as 300-series stainless steel—these alloys have it built in.
Fill in tight gaps without needing to add flux before you braze—these alloys have flux built in. When melted, these alloys form a thin liquid that easily flows into smaller gaps than standard brazing alloys.
Also known as trimetal brazing strips, these alloys have silver with nickel alloy sides and a copper core.