Make connections in circuit boards with these short lengths of terminated wire.

Also known as hook-up wire, this wire is primarily used for wiring electrical panels, lighting, and plant floor equipment.

This wire meets stringent military specifications for material quality.

A durable insulation withstands abrasion, so this wire can be pulled over rough surfaces.

Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces.

The PEEK insulation on this wire won't degrade when exposed to radiation, and is often used in nuclear energy production.

Use this wire in ovens, furnaces, and other electrical heating equipment where temperatures reach 480° F and higher.

More flexible than standard wire, this wire is often used for internal appliance wiring and machine tools. Also known as MTW wire.

Rated to 50 volts AC/DC, this wire is often used in small electronics and robotics. It withstands temperatures of 390° F and greater.

The thin strands in this wire have better fatigue resistance under repeated flexing than the strands in standard continuous-flex wire, so it will last longer.

Connect batteries in vehicles and generators.

Use this wire in automated applications that require 14,000 volts A/C or greater. It withstands continuous motion without degrading data or signal transmission.

Keep spools of vehicle wire in multiple colors on hand.

Also known as magnet wire, this wire is commonly used in motors, transformers, relays, and other high-speed winding applications.

Also known as photovoltaic (PV) wire, this wire is often used in solar panels and resists damage from UV light. It withstands 2,000 volts AC/DC.

After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with hand tools and other portable devices.

Rated to 12 volts DC, this cable is often used in low-voltage applications such as battery and vehicle wiring and radios. Also known as GPT cable.

A thick rubber insulation resists cuts and abrasion, so this cable can be pulled over rough surfaces without damaging the wires inside.

For high-heat applications such as furnaces and ovens, this cable's insulation withstands temperatures of 390° F and higher.

A braided bronze armor provides excellent protection against abrasion and other damage. The wires are tin-plated for corrosion resistance, and the insulation resists corrosive chemicals and salt water.

Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.

In addition to handling continuous movement, this cable withstands twisting up to 450° without degrading data or signal transmission. It's often used in welding robots and rotary tables.

Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.

The insulation has excellent resistance to oil, so this cable can be used near motors. Often used in automated applications, it withstands continuous motion without degrading data or signal transmission

Rated to 17,000 volts AC or higher, this cable is often used in oil drilling, robotics, and festoon systems. It withstands continuous motion without degrading data or signal transmission. The flat shape allows it to fit in tight spaces.

Approved for flame resistance, this cable meets Mine Safety and Health Administration (MSHA) standards. The insulation resists abrasion and chemicals.

Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. It sends signal and data to operate, measure, or regulate automated equipment.

Send signal and data to operate, measure, or regulate automated equipment such as conveyors and CNC machines.

This cable is used in variable-frequency drive motors. It has shielding to block signal interference caused by voltage fluctuations and current spikes.

Connect devices such as sensors, programmable logic controllers, and actuators to an automated network.

This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.

Transmit data in rough industrial applications. This cable has an oil-resistant insulation.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.

Use this cable for complex and high-speed data and signal transmission.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to transmit audio, video, and data signals.

The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.

Connect low-current circuits such as intercoms and security systems to a building's electrical system in single-level facilities.

This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it in low-current circuits such as intercoms and security systems.

This cable is approved for use in vertical shafts and large facilities with mulitple levels for critical circuits such as fire alarms and smoke detectors.

The insulation serves as a tough armor that protects these cords in high-traffic areas.

Commonly used for movie, stage, and interior building lighting, these cords connect to equipment with five-pin XLR connections.

The plugs on these cords pivot up to 90° in each direction to fit Ethernet jacks at awkward angles or in tight spots, such as behind equipment or in enclosures.

Connect computers, monitors, printers, and other devices with DB connections.

Use these cords to extend the distance between your FANUC CRX robot arm and your controller.

Play audio from one source on two different speakers.

Send high-definition signals to monitors, TVs, and projectors.

Often used to connect multiple monitors to a single computer, these cords send video and audio to a display device.

Securely connect equipment in data or signal applications. These cords have A- or B-coded plugs to meet the needs of your device.

Send high-speed data between sensors, switches, or I/O modules with an M8 connection and programmable logic controllers (PLCs) and computers with a traditional RJ45 connection.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have an RJ45 plug on each end.

Unlike the RJ45 ends on traditional Ethernet cords, the threaded M8 ends on these cords keep contaminants out and resist coming loose from vibration.

The shielding blocks signal interference from nearby equipment and devices.

Use these unshielded cords where signal interference is not a concern.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

With a flange on the socket end, you can mount these cords in a panel cutout to move data between computers, printers, and mobile devices.

The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Designed for indoor applications, these cords are often used to power appliances.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.